• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.5
• /
• pp.343-350
• /
• 2013

The objectives of this study were to estimate the potential biomass yield by using the biomass conversion index and evaluate the potential energy production by using the energy conversion index of biomass. Estimating the total biomass yield in Korea showed 9,646.3 thousand tons produced in 2012. Subsequent evaluation of the potential energy production using the estimated biomass yield in 2012 indicated that the calorific values were varied from 3,800 to 4,500 kcal $kg^{-1}$ for crop- and from 4,100 to 4,300 kcal $kg^{-1}$ for woody-based biomass, respectively. Among the examined biomass materials, the pruned branch of a nut tree appeared to be the greatest in bio-energy production showing 6,300 kcal $kg^{-1}$ in calorific value. Total potential energy production from agricultural by-products was estimated approximately at 3,966,000 TOE. Among the agricultural by-products examined, rice straw showed the greatest energy production potential being at 2,321,000 TOE. Furthermore, it might contribute to establishing the countermeasures of biomass utility in agricultural sector based on regional distribution chart of the potential biomass and energy yields in Korea.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.14 no.2
• /
• pp.92-99
• /
• 2016

Purpose: The use of flumazenil administration in the emergency department is still controversial because of concerns about adverse effects. The present study was conducted to re-evaluate the risk-benefit ratio associated with flumazenil administration to patients suspected of having acute hypnotics and sedatives poisoning in the emergency department. Methods: A retrospective chart review study was conducted for patients whose final diagnoses were "poisoning" and "benzodiazepine" or "sedatives-hypnotics" from Mar. 2006 to Feb. 2015. The basal characteristics of the patients, including past medical history, ingredients and dose of ingested drug and co-ingested drugs were investigated. For patients administered flumazenil, responsiveness and time from admission to flumazenil administration were investigated with supplement. All collected data were analyzed in aspect terms of risk/benefit. Results: A total of 678 patients were included in our study. Benzodiazepine was the most common sedative/hypnotic drug prescribed, and the frequency of prescription continuously increased. The proportion of TCA as co-ingestion decreased from 13.1% to 3.9% in patients with acute sedative/hypnotic poisoning. Flumazenil was administered to 55 patients (8.1%), of which 29 patients (52.7%) were applied to contraindications. Fifty-three patients (96.4%) showed positive responsiveness, including partial responsiveness after flumazenil administration. No severe adverse events were identified. Conclusion: Based on the current trends in prescription patterns for sedative/hypnotic drugs, increased use of non-TCA antidepressants, and responsiveness to administration of flumazenil, benefit seemed weighted more in this study, although the observed benefits were based on limited results. Further prospective multicenter studies will be needed to optimize benefit-risk ratio.

• Applied Microscopy
• /
• v.47 no.3
• /
• pp.110-120
• /
• 2017

Non-isothermal thermogravimetry (TG) measurements on melt-quenched $Bi_xSe_{100-x}$ specimens (x=0, 2.5, 7.5 at%) were made at a heating rate ${\beta}=10^{\circ}C/min$ in the range $T=35^{\circ}C{\sim}950^{\circ}C$. The as-measured TG curves confirm that $Bi_xSe_{100-x}$ samples were thermally stable with minor loss at $T{\leq}400^{\circ}C$ and mass loss starts to decrease up to $600^{\circ}C$, beyond which trivial mass loss was observed. These TG curves were used to estimate molar (Se/Bi)-ratios of $Bi_xSe_{100-x}$ samples, which were not in accordance with initial composition. Shaping features of conversion curves ${\alpha}(T)-T$ of $Bi_xSe_{100-x}$ samples combined with a reliable flow chart were used to reduce kinetic mechanisms that would have caused their thermal mass loss to few nth-order reaction models of the form $f[{\alpha}(T)]{\propto}[1-{\alpha}(T)]^n$ (n=1/2, 2/3, and 1). The constructed ${\alpha}(T)-T$ and $(d{\alpha}(T)/dT)-T$ curves were analyzed using Coats-Redfern (CR) and Achar-Brindley-Sharp (ABS) kinetic formulas on basis of these model functions, but the linearity of attained plots were good in a limited ${\alpha}(T)-region$. The applicability of CR and ABS methods, with model function of kinetic reaction mechanism R0 (n=0), was notable as they gave best linear fits over much broader ${\alpha}(T)-range$.

• Journal of the Korea Society for Simulation
• /
• v.16 no.4
• /
• pp.13-22
• /
• 2007

Fault detection of cycle-based signals is typically performed using statistical approaches. Univariate SPC using few representative statistics and multivariate analysis methods such as PCA and PLS are the most popular methods for analyzing cycle-based signals. However, such approaches are limited when dealing with information-rich cycle-based signals. In this paper, process fault defection method based on wavelet analysis is proposed. Using Haar wavelet, coefficients that well reflect the process condition are selected. Next, Hotelling's $T^2$ chart using selected coefficients is constructed for assessment of process condition. To enhance the overall efficiency of fault detection, the following two steps are suggested, i.e. denoising method based on wavelet transform and coefficient selection methods using variance difference. For performance evaluation, various types of abnormal process conditions are simulated and the proposed algorithm is compared with other methodologies.

• Journal of the Korean Society of Costume
• /
• v.51 no.3
• /
• pp.129-139
• /
• 2001

The purpose of this study is to suggest the standard size specification of the apparel item as finding out apparel products'sizing problem in the domestic and foreign interned shopping malls. Though that, to suggest basic data of web page offered sizing system given to consumer higher satisfaction and based on ISO (International Organization For Standardization), domestic industry standard and service related size. The summarized findings are as follow. 1. The result of size description research, the size description system between internet site were very different, in addition in the department shopping malls it was different by manufacturing industry. Also in domestic and foreign shopping malls, It was not correspond to ISO and domestic industry standard, used Numeric and Alphabetical size. In the foreign shopping mall it distinguish body type and age group. 2. The result of consumer's satisfaction, the superior fashion malls were Samsung, LG, Fashionpia in the domestic shopping mall, were Gap, JCPenny, Jcrew in the foreign shopping malls. In the total group, 1-5 grades were ranked in the foreign shopping malls. 3. Satisfaction of the foreign fashion mall was higher than that of the domestic fashion malls. Exactly, foreign fashion mall described size chart, size description, product size and body size measuring method but domestic fashion malls didn't describe that. Domestic fashion malls need sizing system development given to consumer higher satisfaction. In addition sizing system based on ISO and domestic industry standard and subdivided to body type and ale group must be studied. Aloe, fashion information, coordination information and product explanation must be reinforced.

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.1
• /
• pp.86-91
• /
• 2004

Purpose: To evaluate the methods and results of the surgical treatment in the trimalleolar fracture of the ankle. Materials and Methods: We analysed the results of the ankle trimalleolar fracture which were treated with open reduction and internal fixation from January 1999 till September 2003. There were 45 patients who had at least six months follow up, 16 men, and 29 women. We have analysed the mechanism of injury, methods of operation and postoperative complications. Results: The results were assessed on ankle AP, lateral and mortise X-rays and retrospective chart review. There were 30 supination-external rotation, 13 pronation-external rotation, 2 pronation-abduction in the mechanism of injury by Lauge-Hansen classification. Cases of the posterior malleolar fracture which involved more than 25% of the weight bearing surface were 7 (15.6%). Medial malleolar mono-fixation was done in 5 cases, fibular mono-fixation in 2 cases, bimalleolar fixation in 32 cases, trimalleolar fixation in 6 cases. 38 cases (84.4%) were good or excellent in clincal assessment and 39 cases (86.7%) were good or excellent in radiological assessment according to the criteria of the Meyer. There was no difference of results among the surgical treatment methods. Conclusion: The results of our study indicate that the rigid fixation with early ankle motion and weight bearing is needed in ankle trimalleolar fracture. But minimal fixation is not bad in slight displaced fracture. Both anterior approach and posterior approach were useful methods to stabilization the posterior malleolar fracture. And pre-operative evaluation to detect the hidden soft tissue injuries and fracture mechanism is very important to avoid the failure.

• Korean Journal of Digital Imaging in Medicine
• /
• v.14 no.1
• /
• pp.37-42
• /
• 2012

Pediatric head and neck phantom, using the rate by focusing distance and grid images, Image J using the Quality Assessment and Dose Area Product compared. X-ray laboratory equipment due to the Philips Digital DIAGNOST a 110 cm FFD set and using ACE Non-grid, focusing distance 110 cm (12 : 1), 140 cm (12 : 1), 180 cm (8 : 1) Focused grid, Acryl Phantom (Fluke Model 76-2 Series Phantom) 15.24 cm, by resolution chart image acquisition, image evaluation program (Image J Ver. 1.4.3.67, USA) imaging experiments were analyzed using. Dose Area Product in the Non Grid 0.028 $mGy{\cdot}cm^2$, focusing distance 110 cm (12 : 1), the 0.129 $mGy{\cdot}cm^2$, 140 cm (12 : 1), the 0.135 $mGy{\cdot}cm^2$, 180 cm (8 : 1) was measured with a 0.110 $mGy{\cdot}cm^2$ Non Grid, focusing distance 110 cm (12 : 1), 140 cm (12 : 1), 180 cm (8 : 1) Image obtained when grid using the image J program focusing distance 110 cm with grid based on the measured SNR and PSNR Non Grid if the SNR the 17.307 dB, PSNR of the 20.002 dB, if the SNR 28.755 dB, PSNR was measured by the 31.451 dB. Image J image analysis through the streets, rather than focusing on grid by the rate that could see an increase in dose. Select the grid by a small dose rate reduction is possible.

• Archives of Reconstructive Microsurgery
• /
• v.10 no.2
• /
• pp.75-80
• /
• 2001

Purpose : We have evaluated the morbidity of donor site after transfer of free fibular osseous and osteocutaneous flap to defect site of bone and soft tissue due to chronic osteomyelitis of long tubular bone, open fracture with bony defect, bone or soft tissue tumor and congenital anomaly. Materials and methods : The 54 cases of 79 cases to be carried out from May, 1982 to May, 2001 which could be followed up were reviewed. There were forty nine in male and five in female. The mean age was 35(4 to 66)years old and mean follow up period is 21.3 month(12 to 72). We have retrospectively analyzed the various postoperative complications such as compartment syndrome, donor site infection, skin defect, hypesthesia, hammer toes, ankle instability and activity of daily living by help of questionnaire, telephone, physical examination, follow up x-ray study and chart. Results : In the total 54 cases the medication period for pain control after operation were classified into three groups under 2 weeks(49 cases), from 2 weeks to 6 weeks(3 cases) and over 6 weeks(2 cases). The postoperative morbidity were occurred in total 12 cases(compartment syndrome: 0, infection : 2, skin defect: 1, hypesthesia: 5, hammer toe: 2 ankle pain: 2 discomfort in activity of daily living: 0), and also the morbidity rates of donor site were 23.5% in osseous flap and 21.6% in osteocutaneous flap were occurred. There was no statistical significonce in morbidity between osseous and osteocutaneous free fibular flap transfer(P>0.05). Discussion : In general the morbidity of free fibular flap transfer was relatively high but it did not have any effect on daily activity of living. We think that the meticulous operation technique, detailed wound care and early range of motion exercise will reduce the morbidity of donor site of flap.

• Korean Journal of Acupuncture
• /
• v.28 no.3
• /
• pp.63-71
• /
• 2011

Objectives : The aim of this study is to develop the system and evaluate the optical analytical technique that reflects acupoint pigmentation and extravasated blood by cupping. Methods : We designed the system able to express XYZ coordinate on local skin color. To evaluate measurement-accuracy, we compared with 24 Color Checker Chart by standardized Commission Internationale de l'Eclairage. After confirming the performance of system, we experimented with cupping which was 80 kPa negative pressure for 1 minute on left/right BL13. The X, Y and Z values were converted to R, G and B, $L^*$, $a^*$ and $b^*$, Erythema Index (E.I.), and Melanin Index (M.I). We compared and analyzed two cases on before/after cupping. Results : The R, G and B values which were converted by X, Y and Z values had high linearity as a high level of R-square (R: 0.969, G: 0.996, and B: 0.992). Moreover, we confirmed that it was possible to quantitatively analyzed the change in skin color by cupping using R, G, B, $L^*$, $a^*$, $b^*$, E.I., and M.I. Conclusions : Therefore, we proposed the new analytical technique for objectifying the oriental medical diagnostic method using cupping and optical sensing technique.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.854-861
• /
• 2005

The functional behavior of a portable consumer electronic (PCE) product is nearly all expressed with human-machine interaction (HMI) tasks. Although physical prototyping and computer aided design (CAD) software can show the appearance of the product, they cannot properly reflect its functional behavior. In this paper, we propose a virtual prototyping (VP) system that incorporates virtual reality and HMI functional simulation in order to enables users to capture not only the realistic look of a PCE product but also its functional behavior. We obtain geometric part models of the product and their assembly and kinematics information with the help of CAD and reverse engineering tools, and visualize them with various display tools. We adopt state transition methodology to capture the HMI functional behavior of the product into a state transition chart, which is later used to construct a finite state machine (FSM) for the functional simulation of the product. The FSM plays an important role to control the transition between states of the product. The proposed VP system receives input events such as mouse clicks on buttons and switches of the virtual prototype model, and it reacts to the events based on the FSM by activating associated activities. The VP system provides the realistic visualization of the product and the vivid simulation of its functional behavior. It can easily allow users to perform functional evaluation and usability testing. Moreover, it can greatly reduce communication errors occurring in a typical product development process. A case study about VP of an MP3 player is given to show the usefulness of the proposed VP system.