• Journal of Aerospace System Engineering
• /
• v.14 no.1
• /
• pp.62-67
• /
• 2020

The European Aviation Safety Agency (EASA) legislates the CS-E (Certification Specification-Engine) for type certification of aircraft engines. According to the CS-E, engine manufacturers (type certificate holders) the need to show compliance of continued airworthiness of an engine during the overhaul, and the Accelerated Mission Test (AMT) is usually accepted as means of compliance. As a part of the Korean Civil Helicopter program, the engine has been developed with foreign manufacturers to achieve the EASA engine type certificate. In this study, the AMT procedure is planned for the engine to be certified by the EASA, and AMT cycles are also established to meet airworthiness requirements of the CS-E in consideration of the engine design and operation characteristics.

• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.1
• /
• pp.67-95
• /
• 2014

Some Contracting States of the Chicago Convention issue FAOC(Foreign Air Operator Certificate) and conduct various safety assessments for the safety of the foreign operators which operate to their state. These FAOC and safety audits on the foreign operators are being expanded to other parts of the world. While this trend is the strengthening measure of aviation safety resulting in the reduction of aircraft accident. FAOC also burdens the other contracting States to the Chicago Convention due to additional requirements and late permission. EASA(European Aviation Safety Agency) is a body governed by European Basic Regulation. EASA was set up in 2003 and conduct specific regulatory and executive tasks in the field of civil aviation safety and environmental protection. EASA's mission is to promote the highest common standards of safety and environmental protection in civil aviation. The task of the EASA has been expanded from airworthiness to air operations and currently includes the rulemaking and standardization of airworthiness, air crew, air operations, TCO, ATM/ANS safety oversight, aerodromes, etc. According to Implementing Rule, Commission Regulation(EU) No 452/2014, EASA has the mandate to issue safety authorizations to commercial air carriers from outside the EU as from 26 May 2014. Third country operators (TCO) flying to any of the 28 EU Member States and/or to 4 EFTA States (Iceland, Norway, Liechtenstein, Switzerland) must apply to EASA for a so called TCO authorization. EASA will only take over the safety-related part of foreign operator assessment. Operating permits will continue to be issued by the national authorities. A 30-month transition period ensures smooth implementation without interrupting international air operations of foreign air carriers to the EU/EASA. Operators who are currently flying to Europe can continue to do so, but must submit an application for a TCO authorization before 26 November 2014. After the transition period, which lasts until 26 November 2016, a valid TCO authorization will be a mandatory prerequisite, in the absence of which an operating permit cannot be issued by a Member State. The European TCO authorization regime does not differentiate between scheduled and non-scheduled commercial air transport operations in principle. All TCO with commercial air transport need to apply for a TCO authorization. Operators with a potential need of operating to the EU at some time in the near future are advised to apply for a TCO authorization in due course, even when the date of operations is unknown. For all the issue mentioned above, I have studied the function of EASA and EU Regulation including TCO Implementing Rule newly introduced, and suggested some proposals. I hope that this paper is 1) to help preparation of TCO authorization, 2) to help understanding about the international issue, 3) to help the improvement of korean aviation regulations and government organizations, 4) to help compliance with international standards and to contribute to the promotion of aviation safety, in addition.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.93-98
• /
• 2021

In Europe, it is necessary to fulfil the type certification criteria by the European Aviation Safety Agency (EASA) when developing an aircraft engine. According to type certification criteria, a 150 hours endurance test should be performed to verify the stability of the engine structure under the engine's operating limit conditions. The type certification criteria for the 150 hour endurance test are specified in JAR-E, which is the EASA type certification. Currently, the Arriel 2L2 engine is being developed in cooperation with a foreign manufacturer, and a 150 hours endurance test was performed. In this study, a 150 hours endurance test procedure is conducted in consideration of the operation characteristics of the currently developed engine.

• Journal of Aerospace System Engineering
• /
• v.9 no.3
• /
• pp.47-58
• /
• 2015

An aircraft, its engine and propeller are certified in processes of design, production, and operation respectively. Type Certificate is issued if the aviation authority finds that the design of aircraft, engine, or propeller complies with applicable airworthiness standards and environmental standards. The ICAO (International Civil Aviation Organization) prescribes the international standards and recommended practices of type certification for the contracting states. The FAA (Federal Aviation Administration) and the EASA (European Aviation Safety Agency) established their regulations and procedures applicable to type certification. In this paper, we compared the differences among the ICAO, the FAA, and the EASA regulations, and on this comparison, we proposed the rulemaking items to improve type certification regulations in Korea.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.201-208
• /
• 2022

As around the world, ground and underground transportation capacity is reaching its limit, centering on urban areas. As urban traffic becomes congested, time and cost are astronomical, and environmental destruction caused by urban pollution is becoming increasingly serious. As a way to solve this problem, the means of flying over the air are in the spotlight as the next generation of future transportation, and the concept of urban air mobility (UAM, Urban Air Mobility) is defined as systematic planning. The development of an electric-powered vertical take-off (eVTOL) aircraft that obtains electric power through a battery using a personal aerial vehicle (PAV) as a means of transportation has accelerated. As the aircraft development of new technology aircraft in the evtol method is actively carried out, the need to prepare systems such as aircraft certification standards, pilot qualification systems, and qualification management is emerging. The Federal Aviation Administration (FAA) and the European Union Aviation Safety Agency (EASA), which lead international standards, announced new special technical conditions and temporary regulations SCVTOL-01, respectively. However, the pilot qualification system for operating the uam aircraft has not yet been clearly announced. Therefore, this paper analyzes the recently announced FAA regulations and EASA regulations to identify differences and directions in perspectives on UAMs and study the existing vertical take-off and landing aircraft (VTOL) pilot qualification system to present directions for qualification classification.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.115-121
• /
• 2019

The purpose of this study is to establish the training standards for HF of aviation maintenance reflecting the growing relevance of aviation maintenance technicians' ability to perform their work for the safety and efficiency of airline operation. For this purpose, previous studies on the concept of human factors were examined, and the HF training standards of the advanced international aviation bureaus such as the International Civil Aviation Organization(ICAO), Federal Aviation Administration(FAA) and European Aviation Safety Agency(EASA) were compared with the operational technical standards of Korea Aviation Safety Law. In addition, the actual status of human factors education and training were examined for Korea's two full service carriers (FSC) and four of the low cost carriers (LCC). The study results revealed that Korea's human factors education and training standards were weak compared with international standards, and that most airlines were not able to systematically implement human factors education and training. These results complement the existing problem of training standards for aviation maintenance human factors in Korea and support the development of a standard model of the training course for aviation maintenance human factors which meets international standards.

• Journal of Korean Society of Transportation
• /
• v.32 no.5
• /
• pp.431-440
• /
• 2014

According to the State Safety Program (SSP) of the International Civil Aviation Organization (ICAO), it is essential to establish and manage Safety Performance Indicators (SPIs) which are used for monitoring the safety performance to achieve the national aviation safety goal. There have been enormous efforts to develop the framework of SPIs by considering the current status for each country. In case of Republic of Korea, however, there has been limited research and policy projects related to the framework for SPIs. Furthermore, Korea has used identical SPIs since the SSP was legislated in 2008. With this background, this research is, as part of strategy for the state level of SPI development, the study cases of advanced aviation countries for SPI development plans, such as the European Aviation Safety Agency (EASA) of the EU, the Civil Aviation Authority (CAA) of the UK, the Finish Transport Safety Agency (FTSA) of the Finland and the Federal Aviation Administration (FAA) of the U.S. The comparison between the foreign and domestic policies for SPI development strategies are provided in the conclusion of this study. The results and analyses of the case studies performed in this research will be helpful to provide some valuable development strategies for further SPI research in Korea.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.117-121
• /
• 2021

The Multi-crew Pilot License (MPL) is a new pilot qualification introduced by ICAO to train co-pilots for transport aircraft based on efficient and stable competency to respond to changes in the operating environment and technology. ICAO and the European Union Aviation Safety Agency (EASA) require a minimum flight of 240 hours for MPL qualification training, and allow the use of flight simulation training devices (FSTDs) for most of the training, specifying the performance requirements for FSTDs. As South Korea is also preparing for the operation of the MPL training program, it is essential to establish the operating standards for FSTDs required for MPL training. This study aims to identify the international standards for FSTDs related to MPL training, and to compare them with the current operating standards for FSTDs in South Korea for presenting a standard (draft) that can be used when introducing domestic MPL training programs in the future.

• Journal of Aerospace System Engineering
• /
• v.3 no.1
• /
• pp.17-22
• /
• 2009

For establishing new certification requirements for aircraft engines, Technical background of FAR Part33 amendments has reviewed and studied in this paper. The FAA is amending type certification standards for aircraft engines. These changes reflect current industry practices and harmonize FAA standards with those recently adopted by the European Aviation Safety Agency (EASA). These changes establish uniform standards for all engine control systems for aircraft engines certificated by both U.S. and European countries and will simplify airworthiness approvals for import and export.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.32 no.1
• /
• pp.79-90
• /
• 2024

UAM is emerging due to the deepening population concentration in the metropolitan area and the problem of congested ground transportation in urban areas. Accordingly, along with research on eVTOL aircraft for UAM services, interest in vertiport, the interest in vertiports, the infrastructure that allows eVTOLs to take off and land, is also increasing. However, behind the concentration of population in the metropolitan area, aphenomenon of local extinction is occurring in conjunction with the aging population. AAM, which moves quickly through 3D space, can be an effective SOC facility in times of local extinction crisis. In this paper, we introduce a design plan from the perspective of a complex transper center for a regional hub-level vertiport that can connect with local high-speed rail and utilize local airports in compliance with the vertiport design guidelines issued by FAA(Federal Aviation Administration) and EASA(European union Aviation Safety Agency). We would like to present Vertiport's future operation plan.