• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.65-69
• /
• 2015

하천에서 유사이동은 하천환경과 하천형상을 결정하는 주요 요소이므로 이를 해석하는 것은 매우 중요하다. 그러나 유사이동은 일반적으로 이상흐름 (two-phase flow)이며 난류를 동반하기에 이를 해석하기에는 쉽지 않다. 이상흐름을 해석하는 방법으로는 유사를 연속상인 유사구름(sediment cloud)으로 표현하여 해석하는 Euler-Euler 모형이 있으며 입자를 직접 추적하여 해석하는 Euler-Lagrange 모형이 있다. 본 연구에서는 유사이동 해석을 위하여 Euler-Lagrange 모형을 사용하였으며 흐름의 진동성분을 고려하기 위하여 EIM (Eddy Interaction Model)을 사용하였다. 유체의 유속은 Dou (1987)가 제시한 경험식을 사용하였고 난류운동에너지와 소산률은 Nezu and Nakagawa (1993)가 제시한 식을 사용하였다. EIM에서 입자에 발생하는 와의 영향시간(eddy interaction time)을 계산하기 위해 Gosman and Ioannides (1983)가 제시한 eddy lifetime과 eddy crossing time을 사용하였다. 유사입자는 입자의 운동량방정식을 풀어 그 거동을 추적하였으며 일정 시간 후 입자의 수를 이용하여 농도를 계산하였다. 유체에 발생하는 유속의 진동성분에 의해 입자가 부상하고 중력에 의해 흐름에 따른 일정한 농도분포 형태를 가지는 것을 확인하였다. 유사의 입자크기와 흐름에 따른 농도분포를 계산하였으며, 이를 측정치와 비교하여 EIM의 적용성을 확인하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.141-144
• /
• 2003

For the analysis of combustion instabilities of a liquid locket engine, a simple spray combustion model has been analyzed by the Euler-Lagrange method. Gas temperature, droplet trajectory, and droplet radius have been evaluated on 2-D axisymmetric coordinates. The Euler-Lagrange method has been shown to have a good tendency of gas temperature distribution as well as droplet trajectory and radius change.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.591-593
• /
• 2005

This paper presents the dynamic analysis of a humanoid robot using Nastran that is one of FEM analysis program. Generally, computer program based on the Lagrange-Euler method or Newton-Euler method was used for dynamic analysis of a robot. The Lagrange-Euler method requires much calculation performance and it is also hard to apply to complex structure, and the Newton-Euler method limits accurate modeling and calculation for closed structure like a humanoid robot. In this paper, mechanical and structural data are obtained from the Nastran. It is possible for Nastran to make model similar to real system and can apply a physical properties and laws to model. So, accurate simulation is possible. From this result, accurate data is gained by Nastran. Furthermore, this method is shown to be a useful method that guarantees accuracy for trajectory planning.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.331-340
• /
• 2021

The blast damage behavior of reinforced concrete (RC) structures exposed to unexpected extreme loading was investigated. To enhance the accuracy of numerical simulation for blast loading on RC structures with seven blast points, the calculation of blast loads using the Euler-flux-corrected-transport method, the proposed Euler-Lagrange coupling method for fluid-structure interaction, and the concrete dynamic damage constitutive model including the strain rate-dependent strength and failure models was implemented in the ANSYS-AUTODYN solver. In the analysis results, in the case of 20 kg TNT, only the slab member at three blast points showed moderate and light damage. In the case of 100 kg TNT, the slab and girder members at three blast points showed moderate damage, while the slab member at two blast points showed severe damage.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.253-256
• /
• 2006

A numerical study for spray flow of fuel and oxidizer droplets in the combustion chamber has been conducted prior to the analysis of spray combustion of the liquid rocket engine. As the spray combustion model, DSF model and Euler-Lagrange scheme have been used. While the coupling effects of the droplets between gas phase and evaporated vapor have been calculated using PSIC model, SIMPLER algorithm and QUICK scheme have been used as numerical schemes. As the results, the calculations have shown velocity and temperature distribution in combustion chamber as well as mole fraction of fuel and oxidizer.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.208-211
• /
• 2005

In order to provide a useful data of combustion chamber design, a numerical analysis for spray combustion of fuel and oxidizer in combustion chamber has been conducted. As a spray model, the DSF model and the Euler-Lagrange scheme have been used. The change of droplet temperature has been calculated considering droplet heating. The coupling effects between and the gas phase the droplets, and between the gas phase and the evaporated vapor have been calculated using the PSIC model.

• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.33-35
• /
• 2003

The electrooptic properties of the reflected light in a reflective mode, $45^{\circ}C$twisted nematic liquid crystal (TNLC) cell were investigated in the voltage regions near and away from the Freedericksz transition threshold. The measured reflectivity away from the threshold voltage ($V_th$) could not be described by the model which assurnes a constant tilt angle as well as a linearized distribution of twist angle across the cell, although the data are well fitted near $V_th$. We found that in the voltage region away from $V_th$, the model considering the distributions of the tilt angle and the twist angle should be applied for the calculation of the reflectivity. The director-axis distributions were obtained from the numerical integration of the Euler-Lagrange equation.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.159-164
• /
• 2000

In order to clarify the seasonal variation of residual current and material transportation process in Hiroshima Bay, JAPAN, the real-time simulation of residual current and particle tracking by using Euler-Lagrange model were carried out. The calculated tidal current and water temperature and salinity showed good agreement with the observed ones. The residual currents showed the southward flow pattern at the upper layer, and the northward flow pattern at the lower layer. The flow structure of residual current in Hiroshima Bay is an estuarine circulation affected by density flow and wind driven current. The residual current plays an improtant role of material transportation in th bay.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.45-51
• /
• 2001

In order to clarify the seasonal variation of the residual current and the material transportation process in Hiroshima Bay, JAPAN, the real-time simulation of residual current and particle tracking by using the Euler-Lagrange model were carried out. The calculated tidal current, water temperature, and salinity showed good agreement with the observed ones. The residual currents showed a southward flow pattern at the upper layer, and a northward flow pattern at the lower layer. The flow structure of the residual current in Hiroshima Bay is an estuarine circulation affected by density flow and wind driven current. The residual current plays an important role of material transportation in the bay.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.175-178
• /
• 2006

A numerical study for spray combustion of fluctuated fuel and oxidizer droplets injected into combustion chamber has been conducted for the analysis of spray combustion considering characteristics of injector. The 2 dimensional unsteady state flow fields have been calculated by using QUICK Scheme and SIMPLER Algorithm. As the spray model, DSF model and Euler-Lagrange Scheme have been used. The sine Auction has been used for droplet fluctuation model of fuel and oxidizer, while the coupling effects of the droplets between gas phase and evaporated vapor have been calculated by using PSIC model.