• 대한수학회보
• /
• 제20권2호
• /
• pp.81-85
• /
• 1983

It is the purpose of this paper to give some remarks on finite fields. We shall show that the little theorem of Fermat, Euler's criterion for quadratic residue mod p, and other few theorems in the number theory can be derived from the theorems in theory of finite field K=GF(p), where p is a prime. The forms of some irreducible ploynomials over K-GF(p) will be given explicitly.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1321-1327
• /
• 2019

본 논문에서는 GF(p) 상에서 모듈러 제곱근 (MSQR) 연산의 효율적인 하드웨어 구현에 대해 기술한다. MSQR 연산은 타원곡선 기반의 EC-ElGamal 공개키 암호를 위해 평문 메시지를 타원곡선 상의 점으로 매핑하기 위해 필요하다. 본 논문의 방법은 NIST 표준으로 규정된 5가지 크기의 GF(p) 타원곡선을 지원하며, 192-비트, 256-비트, 384-비트 그리고 521-비트 크기의 Kobliz 곡선과 슈도 랜덤 곡선들은 모듈러 값의 특성을 기반으로 오일러 판정법을 적용하고, 224-비트 크기의 경우에는 Tonelli-Shanks 알고리듬을 간략화시켜 적용하였다. 제안된 방법을 ECC 프로세서의 32-비트 데이터 패스를 갖는 유한체 연산회로와 메모리 블록을 이용하여 구현하였으며, FPGA 디바이스에 구현하여 하드웨어 동작을 검증하였다. 구현된 회로가 50 MHz 클록으로 동작하는 경우에, 224-비트 슈도 랜덤 곡선의 경우에는 MSQR 계산에 약 18 ms가 소요되고, 256-비트 Kobliz 곡선의 경우에는 약 4 ms가 소요된다.

• Structural Engineering and Mechanics
• /
• 제61권4호
• /
• pp.453-461
• /
• 2017

This paper presents the series multiple tuned mass dampers (STMDs) to suppress the resonant vibrations of railway bridges under the passage of high-speed trains (HSTs). A STMD device consisting of two spring-mass-damper units connected each other in series is installed on the bridge. In solution, bridge is modeled as a simply-supported Euler-Bernoulli beam with constant cross-section, and vehicle is simulated as a series of moving forces with constant speed. By the assumed mode method, the governing equations of motion of the beam-TMD device coupled system traversed by a moving train are obtained. The optimum values for the parameters of the STMD device are obtained for the criterion based on the minimization of the maximum dynamic displacement of the beam at its midspan. Single TMD and multiple TMDs in parallel are also considered for demonstration of the STMD device's performance. The results show that STMDs are effective in bridge vibration suppression and robust to parameters' change in the main system and the absorber itself.

• Steel and Composite Structures
• /
• 제24권6호
• /
• pp.727-740
• /
• 2017

The present paper studies the stability analysis of the continuously graded CNT-Reinforced Composite (CNTRC) panel stiffened by rings and stringers. The Stiffened Panel (SP) subjected to axial and lateral loads is reinforced by agglomerated CNTs smoothly graded through the thickness. A two-parameter Eshelby-Mori-Tanaka (EMT) model is adopted to derive the effective material moduli of the CNTRC. The stability equations of the CNRTC SP are obtained by means of the adjacent equilibrium criterion. Notwithstanding most available literature in which the stiffener effects were smeared out over the respective stiffener spacing, in the present work, the stiffeners are modeled as Euler-Bernoulli beams. The Generalized Differential Quadrature Method (GDQM) is employed to discretize the stability equations. A numerical study is performed to investigate the influences of different types of parameters involved on the critical buckling of the SP reinforced by agglomerated CNTs. The results achieved reveal that continuously distributing of CNTs adjacent to the inner and outer panel's surface results in improving the stiffness of the SP and, as a consequence, inclining the critical buckling load. Furthermore, it has been concluded that the decline rate of buckling load intensity factor owing to the increase of the panel angle is significantly more sensible for the smaller values of panel angle.

• Wind and Structures
• /
• 제38권3호
• /
• pp.161-170
• /
• 2024

In recent years, there have been an increasing number of experimental studies showing the need to include robustness criteria in the design process to develop complex active control designs for practical implementation. The paper investigates the crosswind aerodynamic parameters after the blocking phase of a two-dimensional square cross-section structure by measuring the response in wind tunnel tests under light wind flow conditions. To improve the accuracy of the results, the interpolation of the experimental curves in the time domain and the analytical responses were numerically optimized to finalize the results. Due to this combined effect, the three aerodynamic parameters decrease with increasing wind speed and asymptotically affect the upper branch constants. This means that the aerodynamic parameters along the density distribution are minimal. Taylor series are utilized to describe the fuzzy nonlinear plant and derive the stability analysis using polynomial function for analyzing the aerodynamic parameters and numerical simulations. Due to it will yield intricate terms to ensure stability criterion, therefore we aim to avoid kinds issues by proposing a polynomial homogeneous framework and utilizing Euler's functions for homogeneous systems. Finally, we solve the problem of stabilization under the consideration by SOS (sum of squares) and assign its fuzzy controller based on the feasibility of demonstration of a nonlinear system as an example.