• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1499-1502
• /
• 2005

Dense $BaMgAl_{10}O_{17}:Eu^{2+}$ phosphor particles with a spherical shape have been synthesized through spray pyrolysis method using basic aluminum nitrate precursor as a spray solution. This $BaMgAl_{10}O_{17}:Eu^{2+}$ particles prepared by the spray pyrolysis have shown the stronger emission intensity compared to the commercially-available $BaMgAl_{10}O_{17}:Eu^{2+}$. However, thermal stability of the BAM:Eu b lue phosphor is very poor due to changing from $Eu^{2+}$ to $Eu^{3+}$ at the thermal process, so brightness of the phosphor decreases. To improve the thermal stability of the dense BAM:Eu phosphor, the spherical BAM:Eu particles were coated with pure $BaMgAl_{10}O_{17}$ layer using the hydrolysis reaction in a solution system. The synthesized powders were characterized by XRD, SEM and PL. On the other hand, the emission properties of the BAM:Eu phosphors coated with $BaMgAl_{10}O_{17}$ layer before and after thermal treatment at $500^{\circ}C$ for 30 min were estimated under VUV excitation. The brightness of the coated phosphor was higher than that of the uncoated phosphor. Also, the coating thickness of BAM layer in the BAM:Eu particles was optimized.

• 한국세라믹학회지
• /
• 제44권3호
• /
• pp.147-151
• /
• 2007

An improvement for the efficiency of the $Sr_{2}SiO_{4}:Eu$ yellow phosphor under the $450{\sim}470\;nm$ excitation range have been achieved by adding the co-doping element ($Mg^{2+}\;and\;Ba^{2+}$) in the host. White LEDs were fabricated through an integration of an blue (InGaN) chip (${\lambda}_{cm}=450\;nm$) and a blend of two phosphors ($Mg^{2+},\;Ba^{2+}\;co-doped\;Sr_{2}SiO_{4}:Eu$ yellow phosphor+CaS:Eu red phosphor) in a single package. The InGaN-based two phosphor blends ($Mg^{2+},\;Ba^{2+}\;co-doped\;Sr_{2}SiO_{4}:Eu$ yellow phosphor+CaS:Eu red phosphor) LEDs showed three bands at 450 nm, 550 nm and 640 nm, respectively. The 450 nm emission band was due to a radiative recombination from an InGaN active layer. This 450 nm emission was used as an optical transition of the $Mg^{2+},\;Ba^{2+}\;co-doped\;Sr_{2}SiO_{4}:Eu$ yellow phosphor+CaS:Eu red phosphor. As a consequence of a preparation of white LEDs using the $Mg^{2+},\;Ba^{2+}\;co-doped\;Sr_{2}SiO_{4}:Eu$ yellow phosphor+CaS:Eu red phosphor yellow phosphor and CaS:Eu red phosphor, the highest luminescence efficiency was obtained at the 0.03 mol $Ba^{2+}$ concentration. At this time, the white LEDs showed the CCT (5300 K), CRI (89.9) and luminous efficacy (17.34 lm/W).

• Korean Chemical Engineering Research
• /
• 제43권1호
• /
• pp.80-84
• /
• 2005

초음파 분무 열분해 공정에 의해 나노 크기의 $Y_2O_3:Eu$ 형광체 분말들을 합성하였다. 고분자 전구체와 융제로 사용되어진 리튬 탄산염이 나노 크기의 $Y_2O_3:Eu$ 형광체의 형태 및 발광 특성에 미치는 영향에 대해 조사하였다. 고분자 전구체와 융제를 동시에 사용했을 때 분무 열분해 공정에 의해 제조된 구형의 마이크론 크기의 분말들은 고온의 후열처리 과정에서 나노 크기의 분말로 전환되었다. $Y_2O_3:Eu$ 형광체의 평균 크기는 분무용액에 첨가되어지는 고분자 전구체와 융제인 리튬 탄산염의 첨가량 및 분무 열분해 공정의 반응기 온도에 많은 영향을 받았다. 고농도의 고분자 전구체를 함유한 분무용액으로부터 고온의 반응기에서 합성되고, $1,000^{\circ}C$ 이상에서 후열처리한 나노크기 $Y_2O_3:Eu$ 분말들은 진공자외선 하에서 좋은 발광 특성을 나타내었으며, 고상 공정에 의해 합성된 상용의 $Y_2O_3:Eu$ 형광체와 비슷한 발광 세기를 가졌다.

• Advances in materials Research
• /
• 제3권4호
• /
• pp.227-232
• /
• 2014

$Ce^{4+}$, $Eu^{3+}$, $Tb^{3+}$ co-doped $Ca_3Si_3O_8F_2$ phosphor was synthesized via solid state reaction method using $CaF_2$, $CaCO_3$ and $SiO_2$ as raw materials for the host and $Eu_2O_3$, $CeO_2$, and $Tb_4O_7$ as activators. The luminescent properties of the phosphor was analysed by spectrofluorophotometer at room temperature. The effect of excitation wavelengths on the luminescent properties of the phosphor i.e. under near-ultraviolet (nUV) and visible excitations was investigated. The emission peaks of $Ce^{4+}$, $Eu^{3+}$, $Tb^{3+}$ co-doped $Ca_3Si_3O_8F_2$ phosphor lays at 480(blue band), 550(green band) and 611nm (red band) under 380nm excitation wavelength, attributed to the $Ce^{4+}$ ion, $Tb^{3+}$ ion and $Eu^{3+}$ ions respectively. The results reveal that the phosphor emits white light upon nUV (380nm) / visible (465nm) illumination, and a red light upon 395nm / 535nm illumination. RE ions doped $Ca_3Si_3O_8F_2$ is a promising white light phosphor for LEDs. The emission colours can be seen using Commission international de l'eclairage (CIE) co-ordinates. A single host phosphor emitting different colours under different excitations indicates that it is a potential phosphor having applications in many fields.

• Korean Chemical Engineering Research
• /
• 제44권6호
• /
• pp.609-613
• /
• 2006

분무열분해법에 의해 장파장 UV 여기원 하에서 높은 발광세기를 가지는 $Ba_{2-x.}Sr_{x.}SiO_4:Eu^{2+}$ 형광체를 제조하였다. 분무열분해공정 의해 제조된 $Ba_{2-x.}Sr_{x.}SiO_4:Eu^{2+}$ 형광체의 발광특성, 분말 형태 및 결정성에 대해 조사하였다. 분무열분해 공정에 의해 제조된 $Ba_{2-x.}Sr_{x.}SiO_4:Eu^{2+}$ 형광체는 모체를 구성하는 바륨과 스트론튬의 비에 따라 청녹색에서 황색에 이르기까지 다양한 파장대의 색을 구현할 수 있었다. x = 0인 $Ba_2SiO_4:Eu^{2+}$ 형광체의 경우 발광 중심파장이 500 nm였으며, x = 2인 $Sr_2SiO_4:Eu^{2+}$ 형광체의 경우 발광중심 파장이 554 nm였다. 분무열분해 공정에 의해 제조된 $Ba_{2-x.}Sr_{x.}SiO_4:Eu^{2+}$ 형광체는 구형의 형상을 띄지만 중공성의 입자 특성을 가졌다. 반면에 후열처리 과정을 거친 $Ba_{2-x.}Sr_{x.}SiO_4:Eu^{2+}$ 형광체는 큰 입자 크기와 불규칙한 형태를 가졌다. $Ba_{1.488}Sr_{0.5}SiO_4:Eu_{0.012}{^{2+}}$ 형광체가 환원분위기 하에서 후열처리 온도 $1,200^{\circ}C$에서 3시간 동안 후열처리 과정을 거쳤을 때 최적의 발광 세기를 가졌다.

• 한국세라믹학회지
• /
• 제43권5호
• /
• pp.304-308
• /
• 2006

We have synthesized a $Eu^{2+}-activated\;Sr_3MgSi_2O_8$ blue phosphor and $(Sr,Ba)_2SiO_4$ yellow phosphor and prepared white LEDs by combining these phosphors with a InGaN UV LED chip. Three distinct emission bands from the InGaN-based LED and the two phosphors are clearly observed at 405 nm, 460 nm and at around 560 nm, respectively. The 405 nm emission band is due to a radiative recombination from a InGaN active layer. This blue emission was used as an optical transition of the $Sr_3MgSi_2O_8:Eu$ blue phosphor and $(Sr,Ba)_2SiO_4:Eu$ yellow phosphor. The 460 nm and 560 nm emission band is ascribed to a radiative recombination of $Eu^{2+}$ impurity ions in the $Sr_3MgSi_2O_8:Eu$ and $(Sr,Ba)_2SiO_4$ host matrix. As a consequence of a preparation of UV White LED lamp using the $Sr_3MgSi_2O_8:Eu$ blue phosphor and $(Sr,Ba)_2SiO_4:Eu$ yellow phosphor, the highest luminescence efficiency was obtained at the ration of epoxy/two phosphor (1/0.2361). At this time, the CIE chromaticity was CIE x = 0.3140, CIE y = 0.3201 and CCT (6500 K).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1338-1342
• /
• 2005

We have synthesized an $Eu^{2+}$-activated $Sr_3MgSi_2O_8$ blue phosphor and $Ba_2SiO_4$ green phosphor and $Ba^{2+}$ co-doped $Sr_3SiO_5$ red phosphor investigated an attempt to develop white LEDs by combining it with a GaN blue LED $chip(\lambda_{em}=405 nm)$. Three distinct emission bands from the GaN-based LED and the $(Sr_3MgSi_2O_8:Eu\; +\; Ba_2SiO_4:Eu\; +\; Ba^{2+}\; co-doped\; Sr_3SiO_5:Eu)$ phosphor are clearly observed at 460nm, 520 nm and at around 600 nm, respectively. These three emission bands combine to give a spectrum that appears white to the naked eye. Our results show that GaN (405 nm chip)-based $(Sr_3MgSi_2O_8:Eu\; +\; Ba_2SiO_4:Eu\; +\; Ba^{2+}\; co-doped\; Sr_3SiO_5:Eu) exhibits a better luminous efficiency than that of the industrially available product InGaN (460 nm chip)-based YAG:Ce.

• 한국표면공학회지
• /
• 제48권5호
• /
• pp.211-217
• /
• 2015

To fabricate white LED having a high color rendering index value, red color phosphor mixed with the green color phosphor together in the blue chip, namely the blue chips with RG phosphors packaging is most favorable for high power white LEDs. In our previous papers, we reported on successful syntheses of $Sr_{2-}$ $Si_5N_8:Eu^{2+}$ and $CaAlSiN_3$ phosphors for red phosphor. In this work, for high power green phosphor, greenemitting ternary nitride $Ba_3Si_6O_{12}N_2:Eu^{2+}$ phosphor was synthesized in a high frequency induction furnace under $N_2$ gas atmosphere at temperatures up to $1400^{\circ}C$ using $EuF_3$ as a raw material for $Eu^{2+}$ dopant. The effects of molar ratio of component and experimental conditions on luminescence property of prepared phosphors have been investigated. The structure and luminescence properties of prepared $Ba_3Si_6O_{12}N_2:Eu^{2+}$ phosphors were investigated by XRD and photoluminescence spectroscopy. The excitation spectra of $Ba_3Si_6O_{12}N_2:Eu^{2+}$ phosphors indicated broad excitation wavelength range of 250 - 500 nm, namely from UV to blue region with distinct enhanced emission spectrum peaking at ${\approx}530nm$.

• 대한화학회지
• /
• 제46권2호
• /
• pp.164-168
• /
• 2002

$SrGa_2S_4$:Eu는 녹색을 발광하는 형광체로 전계 방출 디스플레이, 음극선 발광 분야에 널리 응용되고 있다. 일반적으로 $SrGa_2S_4$:Eu의 합성은 $SrCO_3$,$Ga_2O_3$, 그리고 $Eu_2O_3$를 $H_2S$ 와 Ar 가스를 흘려주면서 고온에서 소송하는 고상반응법으로 합성하였다. 본 연구에서는 SrS, Eu 착물, 그리고 Ga 착물의 분해 반응을 통해서 $SrGa_2S_4$:Eu 형광체를 합성하였다. 이 방법의 장점은 Ar 가스 뿐 만 아니라 독성의 $H_2S$를 사용하지 않는 것이다. $SrGa_2S_4$:Eu 형광체의 합성 조건과 발광 특성을 검토하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1355-1359
• /
• 2006

Due to its efficient red emission, $Eu^{3+}$ ion has been doped in various host materials. $GdCa_4B_3O_{10}:Eu^{3+}$ phosphor for red emission has been prepared by solid state reaction. Photoluminescence properties for the phosphor under UV and VUV excitation were investigated. The $GdCa_4B_3O_{10}:Eu^{3+}$ phosphor under both excitation conditions shows typical red emission spectrum centered at 611 nm with several weak peaks due to energy transfer from $^5D_O\;to\;^7F_J(J=1,2,3,4)$ of $Eu^{3+}$ ion. On the other hand, the activator content exhibiting the concentration quenching under UV and VUV irradiation is 10 mole% and 2.5 mole%, respectively.