• Journal of Adhesion and Interface
• /
• v.11 no.3
• /
• pp.89-99
• /
• 2010

In this paper, for polymerization of poly(vinyl acetate-co-ethylene) (VAE) by redox system using poly(vinyl alcohol) (PVOH) as emulsifier on the properties of the final emulsion, and pH changes affect the physical properties of the final emulsion was investigated. The results of the molecular weight of PVOH had a dramatic impact on the emulsion properties. The used a low molecular weight of PVOH products was obtained low viscosity and using the high molecular weight of PVOH were obtained high viscosity product. However, changing the pH of the final polymerized product properties for the PVOH obtained different results. Generally, a poly(vinyl acetate) emulsion by a high degree of polymerization and high molecular weight of PVOH was obtained high viscosity of the final emulsion. But, in VAE was lower emulsion viscosity in high pH. This is the molecular weight of the emulsion during the synthesis of PVOH is considered to be affected by degradation. The final viscosity was decreased by grafting ratio and molecular weight were decreased with increasing of pH.

• Journal of Radiation Industry
• /
• v.17 no.3
• /
• pp.225-232
• /
• 2023

In this study, poly(ethylene-co-vinyl acetate)/magnesium hydroxide (EVA/MDH) composites were prepared by electron beam crosslinking. EVA as a matrix resin and MDH as a flame retardant were melt-blended and compression molded to prepare EVA/MDH composites. The prepared EVA/MDH composites were electron beam-irradiated at various absorbed doses of 50~200kGy. The effects of electron beam irradiation on the gel content, tensile strength, elongation-at-break, thermal properties, and flame retardancy of the composites were investigated. The gel content and tensile strength increased, while the elongation-at-break decreased with an increase in the absorbed dose due to the formation of crosslinked network structures. In addition, the thermal stability and flame retardancy improved as the absorbed dose increased. Therefore, the EVA/MDH composites prepared in this study can be used as an insulation material for flame-retardant and heat-resistant wires and cables.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.3
• /
• pp.33-39
• /
• 1994

We have studied the effect of loading amount and particle size on the rate of release of 5-fluorouracil (5-FU) from ethylene-vinyl acetate (EVA) matrix. Release rate increased as the loading amount and particle size increase. We also studied the effect of additives (lactose and algin) on the rate of release of 5-FU. Both algin and lactose promoted the rate of release. The ability to increase the rate is in the order of algin>lactose>5-FU. Scanning electron microscope study clearly shows that large cavities and cracks are created. The results imply that, by the proper combinations of the amount of the additive, $EVA_c$ and drug, the rate of drug release can be modulated over a wide range of values.

• Elastomers and Composites
• /
• v.54 no.1
• /
• pp.7-13
• /
• 2019

Recycling of waste polyvinyl chloride plastics has attracted much attention due to environmental problems, but the poor mechanical properties, low thermal stability, frequent breakage of strands, and melt cracking of the waste plastics have limited their widespread use. To overcome these disadvantages of waste PVC (W-PVC), recycled PVC powder blend was prepared by adding high-density polyethylene (HDPE) and ethylene vinyl acetate (EVA) as a heat stabilizer and compatibilizer, respectively. An intermeshing co-rotating twin screw extruder was used to prepare the blend, and the characteristics of the blend were analyzed by SEM and TGA, and by using a UTM and Izod impact tester. The impact strength was improved as the EVA content increased for the W-PVC/HDPE (80/20 wt%) blend. As the HDPE and EVA contents increased in the W-PVC/HDPE/EVA blend, the impact strength increased. SEM observations also revealed the improved interfacial adhesion for the EVA-containing blend.

• Macromolecular Research
• /
• v.11 no.4
• /
• pp.260-266
• /
• 2003

Ethylene vinyl acetate (EVA)/clay nanocomposites were synthesized by blending a solution of ethylene vinyl acetate copolymer containing 12% vinyl acetate abbreviated as EVA-12 in toluene and dispersion of dodecyl ammonium ion intercalated montmorillonite (l2Me-MMT) in N,N-dimethyl acetamide (DMAc). X-ray patterns of sodium montmorillonite ($Na^+$-MMT) and 12Me-MMT exhibited $d_{001}$ peak at $2{\theta}=7.4^{\circ}$ and $2{\theta}=5.6^{\circ}$ respectively; that is, the interlayer spacing of MMT increased by about 0.39 nm due to intercalation of dodecyl ammonium ions. The XRD trace of EVA showed no peak in the angular range of $3-10^{\circ}(2{\theta})$. In the XRD patterns of EVA/clay hybrids with clay content up to 6 wt% the basal reflection peak of 12Me-MMT was absent. leading to the formation of delaminated configuration of the composites. When the 12Me-MMT content was 8 wt% in the EVA-12 matrix, the hybrid revealed a peak at about $2{\theta}=5.6^{\circ}$, owing to the aggregation of aluminosilicate layers. Transmission electron microscopic photograph exhibited that an average size of 12-15 nm clay layers were randomly and homogeneously dispersed in the polymer matrix, which led to the formation of nanocomposite with delaminated configuration. The formation of delaminated nanocomposites was manifested through the enhancement of mechanical properties and thermal stability, e.g. tensile strength of an hybrid containing only 2 wt% 12Me-MMT was enhanced by about 36% as compared with neat EVA-12.

• Journal of Adhesion and Interface
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2011

An automated reaction calorimeter was used to directly monitor the rate of emulsion polymerization of vinyl acetate using poly(vinyl alcohol) (PVAs) having different degrees of blockiness. By using this technique in conjunction with other off-line measurements of the evolution of particle size distributions, important details of the process were observed. No constant graft rate period was observed for both low and high initial monomer-water ratios. The gel effect was observed for the low monomer-water ratio recipe. The particle size distributions were broad (particle diameter 40~100 nm) and bimodal. Continuous nucleation was observed to be accompanied by 'limited aggregation' and flocculation during the particle growth stages. It was speculated to be due to the occurrence of the extensive 'limited aggregation' and chain transfer to PVA leading to grafting.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1667-1670
• /
• 1999

In this paper, We are studied the electrical properties of thin film mixed with LLDPE and EVA, and the specimen is selected as Low Linear Density Polyethylene and Ethylene Vinyl Acetate produced by mixture ratio of 50:50, 60:40, 70:30 and 80:20. (thickness $100[{\mu}m],\;70[{\mu}m],\;50[{\mu}m],\;30[{\mu}m]$). As the electrical properties. one is electrical conduction characteristics of the due to mixture ratio of linear low density polyethylene (LLDPE) and ethylene vinyl acetate(EVA), the other is AC breakdown of specimens due to variation of the thickness. From the result of XRD, it is confirmed that specimen of 80 : 20 and virgin LLDPE have high peaks at $2\theta=21.4[^{\circ}]$ and the peak by the contribution of amorphous at $2{\theta}=19.5[^{\circ}]$ is constant with no relation to mixture ratio, but virgin EVA is somewhat lower.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1993.04a
• /
• pp.103-103
• /
• 1993

목적: Estroge 결핍으로 나타나는 폐경기의 주요 증상을 경감 치료하기 위해, estrogen경구 투여시 위장장애, 위장에서의 대사, 간 초회효과, 자주 투여로 인한 환자의 불편 등의 단점이 있나, 이러한 점을 개선하기 위한 투여경로의 하나로 피부를 통해 일정약물을 장기간 일정속도로 송달시키는 경피 흡수 시스템의 개발이 필요하다. 따라서 (EE)의 장기제어방출을 위해 ethylene vinyl acetate (EVA)를 사용하여 장기 제어방출 및 경피 흡수의 최적화 조건을 설정하여 경피흡수 시스템을 위한 막의 개방을 목적으로 한다. 방법: VA 함량이 18-40％까지의 EVA를 사용하여 EE를 함유한 matrix를 casting 방법으로 제조하고 변형된 Keshary-Chien cell을 이용하여 방출실험을 실행하였다. 이때 방출에 미치는 여러 가지 인자로서 EVA 주의 VA함량, 막의 두께, receptor 중 PEG 400의 용량비율, 방출 매개체의 온도, loading 된 약물의 량 등에 대해 검토하였다. 그리고 점개한 mouse skin에 대한 투과 실험을 행하고 이에 미치는 PEG 400과 자질층의 역할을 검토하였다. 결과: EE의 용해도는 saline so PEG 400의 용량 비율이 증가함에 따라 지수 함수적으로 증가하였다. 그리고 VA 함량이 증가될수록, PEG 400의 용량비율, 방출 매개체의 온도, loading 된 약물의 양이 증가될수록 PEG 400의 용량비율, 방출 매개체의 온도, loading 된 약물의 양이 증가될수록 EE의 방출속도와 부과속도는 증가하였다. 또한 투과속도는 막두께의 역수와 직선상의 상관 관계를 보였다. 그리고 EVA matrix로부터 EE가 방출되는 양상은 diffusion-controlled model을 따랐으며 이때 단위면적당 방출된 총량은 T에 비례되었다. 절개한 mouse skin을 통한 EE의 permeation은 PEG 400의 첨가에 의해 상승되었다. 이와 같이 EVA 막이 EE의 부과 및 방출을 조절하는 것으로 보아 경피 흡수를 위해 사용될 수 있다고 사료된다.

• Journal of Sensor Science and Technology
• /
• v.23 no.4
• /
• pp.229-233
• /
• 2014

In this study, a V-grooved single-mode fiber along with optical time domain reflectometry (OTDR) as a quasi-distributed temperature sensor was investigated. The external medium used to fill the V-groove affects the optical mode. The V-groove was filled with ethylene vinyl acetate (EVA) because its transmittance was sensitive to temperature. The experimental results showed that the optical loss of the sensor varies with temperature, and the sensitivity depends on the depth of the V-groove.

• Polymer(Korea)
• /
• v.28 no.6
• /
• pp.468-477
• /
• 2004

The polymer blends of waste poly(vinyl chloride) (RPVC) and waste polyethylene (RPE) were prepared by melt mixing. Various ethylene-vinyl acetate copolymers (EVA) and ethylene-methacrylic acid Na salt copolymer (ionomer) were used as compatibilizer. Their morphologies and mechanical properties were evaluated as a funtion of mixing sequence and time. EVA with high vinyl acetate contents showed a rapid increment of tensile properties when small amount was added. Tensile properties of the blends were gradually increased with the addition of ionomer. Morphologies of RPVC/RPE blends were analyzed by scanning electron microscopy. FT-IR data showed that EVA was a good compatibilizer in RPVC/RPE blend compared to ionomer. Mechanical properties of the blends were highly enhanced when RPVC and compatibilizer were mixed and first RPE was added later.