• 제목/요약/키워드: Ethernet networks

검색결과 169건 처리시간 0.032초

차세대 DSL망의 구현 방안 (Implementation of Next Generation DSL Networks)

  • 박승철
    • 한국정보과학회논문지:정보통신
    • /
    • 제32권2호
    • /
    • pp.236-243
    • /
    • 2005
  • 전 세계적으로 약 8000만 이상의 회선에 이르는 기존의 대부분의 DSL(Digital Subscriber Line)망은 ATM (Asynchronous transfer Mode) 기반의 지역 백본 망(Regional Backbone Network)과 의 효율적인 연동과 다양한 멀티미디어 서비스의 효과적인 지원을 위해 ‘ATM over DSL’방식의 프로토콜 구조를 채택하였다. 그러나 최근에 기존의 ATM 대신 메트로 이터넷 기반의 지역 백본망 구축과 IP기반의 멀티미디어 서비스가 활성화됨에 따라 VDSL(Very high-rate DSL)과 같은 차세대 DSL망 구현에서 기존의 ATM over DSL 프로토콜 구조 대신 ‘Ethernet over DSL’프로토콜 구조 채택이 시도되고 있다. 본 논문은 메트로 이던넷 지역 백본망에서의 차세대 DSL망 구현 방안으로‘ATM over DSL’프로토콜 구조 기반의 EA(Ethernet-to-ATM) 구현 모델과 ‘Ethernet over DSL’프로토를 구조 기반의 EE(Ethernet-to-Ethernet) 구현 모델을 제시한다. 그리고 본 논문에서는 실제 테스트베드를 통해 측정된 결과를 바탕으로 두 구현 모델에 대한 성능을 비교하고, 기존 DSL망과의 호환성 관점에서의 장단점을 비교 분석하였다.

배전자동화시스템 통신서비스를 위한 이중화 통신망 보호절체 알고리즘 연구 (A Study on the Protection Switching Mechanism for Distribution Automation System Ethernet Networks Service of Distribution Automation System)

  • 유남철;김재동;오재곤
    • 전기학회논문지
    • /
    • 제62권6호
    • /
    • pp.744-749
    • /
    • 2013
  • The protection switching technology is widely adopted in the fiber-optical transmission equipments based on TDM(Time Division Multiplexing), such as PDH, SDH/SONET. A variety of protection switching algorithms for Ethernet networks and the progress of standardization are summarized in the document. There are several kinds of protection switching algorithms for Ethernet networks, such as STP, RSTP, MSTP and etc. However, since Ethernet signal move through detour route, it causes much time to recover. Accordingly, it is difficult to secure a usability of Ethernet networks and QOS(Quality of Service). Also, if the protection switching protocol standardized by IEEE and ITU-T is used, it remains a inherent network switching time for protection. Therefore, a specific protection switching algorithm for Ethernet are needed for seamless and stable operation of Ethernet networks service for Distribution Automation System(DAS). A reliable protection algorithm with no switching delay time is very important to implement Self-healing service for DAS. This study of FPGA based protection switching algorithm for Ethernet networks shows that in case of faults occurrence on distribution power network, immediate fault isolation and restoration are conducted through interaction with distribution equipments using P2P(Peer to Peer) communication for protection coordination. It is concluded that FPGA based protection switching algorithm for Ethernet networks available 0ms switching time is crucial technology to secure reliability of DAS.

이더넷 메시 망에서의 물리 토폴로지 발견 알고리즘 (Physical Topology Discovery Algorithm for Ethernet Mesh Networks)

  • 손명희;김병철;이재용
    • 대한전자공학회논문지TC
    • /
    • 제42권4호
    • /
    • pp.7-14
    • /
    • 2005
  • 통신망에 대한 토폴로지 발견에 대한 기존의 연구는 주로 IP망에 대한 것으로 이더넷 장비의 토폴로지 발견은 배제되었다. 그러나 가격대비 성능이 우수한 이더넷 망이 점차 매트로 화되면서 이더넷 망에 대한 토폴로지 발견을 통하여 이더넷 망 관리에 대한 필요성이 요구 되었다. 하지만 벤더 의존적인 토폴로지 발견 알고리즘과 2계층 포워딩 테이블에 의존적인 토폴로지 발견 알고리즘으로 인하여 메시 구조의 토폴로지는 발견하지 못한다. 본 논문에서는 이러한 제약을 극복하기 위하여 이더넷 망을 브리지 망과 호스트 망으로 구분하여 각 망에 효과적인 토폴로지 발견 알고리즘을 제안한다. 두 가지 종류의 망의 경계에 있는 브리지들을 에지 브리지라고 정의하고 에지 브리지 내부의 브리지 망은 스패닝 트리 프로토콜과 관련된 표준 MIB에 의하여 메시 구조의 토폴로지 발견이 가능하고 에지 브리지의 외부 망인 호스트 망은 2계층 포워딩 테이블과 관련된 표준 MIB을 이용함으로써 실시간적인 호스트망의 토폴로지 발견이 가능하다.

High-Performance Synchronization for Circuit Emulation in an Ethernet MAN

  • Hadzic Ilija;Szurkowski Edward S.
    • Journal of Communications and Networks
    • /
    • 제7권1호
    • /
    • pp.1-12
    • /
    • 2005
  • Ethernet is being deployed in metropolitan area networks (MANs) as a lower-cost alternative to SONET-based infrastructures. MANs are usually required to support common communication services, such as voice and frame relay, based on legacy synchronous TDM technology in addition to asynchronous packet data transport. This paper addresses the clock synchronization problem that arises when transporting synchronous services over an asynchronous packet infrastructure, such as Ethernet. A novel algorithm for clock synchronization is presented combining time-stamp methods used in the network time protocol (NTP) with signal processing techniques applied to measured packet interarrival times. The algorithm achieves the frequency accuracy, stability, low drift, holdover performance, and rapid convergence required for viable emulation of TDM circuit services over Ethernet.

공장자동화를 위한 토폴로지에 따른 스위칭 이더넷의 성능분석 (Performance Analysis of Switched Ethernets with Different Topologies for Industrial Communications)

  • 김명균;박진원
    • 정보처리학회논문지C
    • /
    • 제11C권1호
    • /
    • pp.99-108
    • /
    • 2004
  • 본 논문에서는 공장자동화를 위한 제어네트워크로서의 스위칭 이더넷 네트워크의 성능을 분석한다. 스위칭 이더넷은 네트워크상에서의 충돌을 없앰으로써 실시간 데이터의 전송을 가능하게 하여 준다. 공장자동화 제어네트워크는 일반 컴퓨터 네트워크와는 달리 전송되는 데이터의 양은 적은 반면 실시간 전송을 요한다. 본 논문에서는 이더넷 스위치를 이용한 선형 및 트리 토폴로지의 네트워크에서 제어시스템이 요구하는 전송지연시간 요구를 만족하는지에 대해 분석한다.

Physical Topology Discovery for Metro Ethernet Networks

  • Son, Myung-Hee;Joo, Bheom-Soon;Kim, Byung-Chul;Lee, Jae-Yong
    • ETRI Journal
    • /
    • 제27권4호
    • /
    • pp.355-366
    • /
    • 2005
  • Automatic discovery of physical topology plays a crucial role in enhancing the manageability of modern metro Ethernet networks. Despite the importance of the problem, earlier research and commercial network management tools have typically concentrated on either discovering logical topology, or proprietary solutions targeting specific product families. Recent works have demonstrated that network topology can be determined using the standard simple network management protocol (SNMP) management information base (MIB), but these algorithms depend on address forwarding table (AFT) entries and can find only spanning tree paths in an Ethernet mesh network. A previous work by Breibart et al. requires that AFT entries be complete; however, that can be a risky assumption in a realistic Ethernet mesh network. In this paper, we have proposed a new physical topology discovery algorithm which works without complete knowledge of AFT entries. Our algorithm can discover a complete physical topology including inactive interfaces eliminated by the spanning tree protocol in metro Ethernet networks. The effectiveness of the algorithm is demonstrated by implementation.

  • PDF

이더넷/TDM 통합전달 시스템의 설계 및 구현 (Design and Implementation of Ethernet and TDM Convergence System)

  • 윤지욱;염경환;이종현
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2005년도 추계종합학술대회
    • /
    • pp.237-240
    • /
    • 2005
  • We propose a fully converged Ethernet and TDM transport system. Developed Ethernet and TDM convergence system can support not only L2VPN service and premium multimedia service based on MPLS protocol but also TDM leased line service, simultaneously. Developed convergence system can provide high reliability for Ethernet data due to support protection and restoration function of circuit based networks. Evaluation for Ethernet and TDM path was successfully performed to show the typical application of the proposed system in the legacy networks.

  • PDF

이기종 필드버스 통합을 위한 필드버스 게이트웨이 설계 및 구현 (The Design & Implementation of Fieldbus Bridge for Integration of different Fieldbus networks)

  • 이영민;김명균
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 추계학술대회
    • /
    • pp.116-120
    • /
    • 2011
  • 본 논문에서는 CAN네트워크와 Profibus 네트워크를 통합하기 위한 통합 프로토콜 게이트웨이를 설계, 구현하였다. CAN/Profibus 네트워크를 통합하기 위하여 스위칭이더넷을 백본 네트워크로 사용하였고, 각각의 필드버스 네트워크는 CAN/Ethernet 및 Profibus/Ethernet 게이트웨이를 이용하여 이더넷 스위치에 연결되며, 각 게이트웨이는 필드버스 프레임과 이더넷 프레임 사이의 변환을 수행한다. 또, 스위칭 이더넷 환경에서 게이트웨이 사이에 분산 경성 실시간 스케줄링 알고리즘을 적용하여 메시지의 실시간성을 만족할 수 있게 하였다. CAN/Ethernet 및 Profibus/Ethernet 게이트웨이 구현을 위해 실시간 메시지 전송을 지원하는 리눅스 2.6.31.12 Real-Time Patch 버전을 사용하였고, 실제 구현을 통해 메시지의 성공적인 변환과 실시간성을 확인할 수 있었다.

  • PDF

빌딩용 신.재생에너지시스템 제어를 위한 LonWorks기반 원격 제어모듈 개발 (Web based control modules Using LonWorks/Ethernet Server for Control a large Scale Renewable Energy System in Building)

  • 홍원표
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.1706-1711
    • /
    • 2008
  • This paper proposes a new Web based-control concept & design method and implementation of LonWorks network system for a large scale renewable energy energy control and monitoring system in building. The Experimental LonWorks network system using LonWorks/Ethernet(Web) server is designed and fabricated. This article addresses issues in architecture of LonWorks/Ethernet sever, embedded processors architecture for converting LonTalks protocol to Modbus protocol and software, and Internet technologies. It is also verified that the multi-induction motor control and monitoring system using LonWorks/Ethernet server have available, interoperable, reliable performance characteristics from the experimental results, Especially, The seamless integration of TCP/IP networks with control networks allows access to any control point from anywhere. Thus, the results provide a available technical data for remote distributed control system of industrial and buildings field.

  • PDF

Enhanced Dynamic Bandwidth Allocation Algorithm in Ethernet Passive Optical Networks

  • Park, Byung-Joo;Hwang, An-Kyu;Yoo, Jae-Hyoung
    • ETRI Journal
    • /
    • 제30권2호
    • /
    • pp.301-307
    • /
    • 2008
  • As broadband access is evolving from digital subscriber lines to optical access networks, Ethernet passive optical networks (EPONs) are considered a promising solution for next generation broadband access. The point-to-multipoint topology of EPONs requires a time-division multiple access MAC protocol for upstream transmission. In this paper, we propose a new enhanced dynamic bandwidth allocation algorithm with fairness called EFDBA for multiple services over EPONs. The proposed algorithm is composed of a fairness counter controller and a fairness system buffer in the optical line terminal. The EFDBA algorithm with fairness can provide increased capability and efficient resource allocation in an EPON system. In the proposed EFDBA algorithm, the optical line termination allocates bandwidth to the optical network units in proportion to the fairness weighting counter number associated with their class and queue length. The proposed algorithm provides efficient resource utilization by reducing the unused remaining bandwidth made by idle state optical network units.

  • PDF