• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.237-241
• /
• 2008

Femtocells are cellular access points that connect to a mobile operator's network using residential DSL or cable broadband connections. They have been developed to work with a range of different cellular standards including CDMA, GSM and UMTS. Like legacy base station, the frequency accuracy and phase alignment is necessary for ensuring the quality of service (QoS) for applications such as voice, real-time video, wireless hand-off, and data over a converged access medium at the femtocell. But, the GPS has some problem to be used at the femtocell, because it is difficult to set-up, depends on the satellite condition, and very expensive. So, some techniques are discussed to alternate with the legacy GPS system. NTP, PTP, Synchronous Ethernet use the ethernet to synchronize distributed clocks in packet networks. AGPS support reliable position information than the legacy GPS in poor signal conditions. But, These method also have some problems. So, hybrid timing method like A-GPS+PTP and TV+GPS was developed to make up the weak point of GPS. This paper introduces the each method and compare each other and y propose much better solution for timing synchronization at the Femtocell

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권8호
• /
• pp.3025-3047
• /
• 2021

This paper presents the latest Ethernet standardization of in-vehicle network and the future trends of automotive Ethernet technology. The proposed system provides design and optimization algorithms for automotive networking technology related to AVB (Audio Video Bridge) technology. We present a design of in-vehicle network system as well as the optimization of AVB for automotive. A proposal of Reduced Latency of Machine to Machine (RLMM) plays an outstanding role in reducing the latency among devices. RLMM's approach to real-world experimental cases indicates a reduction in latency of around 41.2%. The setup optimized for the automotive network environment is expected to significantly reduce the time in the development and design process. The results obtained in the study of image transmission latency are trustworthy because average values were collected over a long period of time. It is necessary to analyze a latency between multimedia devices within limited time which will be of considerable benefit to the industry. Furthermore, the proposed reliable camera and video streaming through optimized AVB device settings would provide a high level of support in the real-time comprehension and analysis of images with AI (Artificial Intelligence) algorithms in autonomous driving.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.334-337
• /
• 2005

This paper describes the implementation of DCS communication network that provides high bandwidth and reliability. The network for DCS in this paper adopts the Reflective Memory (RM) architecture and Fast Ethernet physical media that have 100Mbps bandwidth. Also, this network uses Ring Enhancement Device (RED) which was invented to reduce the time delay of each node. The DCS network that is introduced in this paper is named as ERCNet(Ethernet based Real-time Control Network). This paper describes the architecture and working algorithms of ERCNet and performs numerical analysis. In addition, the performance of ERCNet is evaluated by experiment using the developed ERCNet network.

• ETRI Journal
• /
• 제30권6호
• /
• pp.874-876
• /
• 2008

Ethernet ring protection is a new technology introduced in ITU-T Recommendation G.8032, which utilizes the generic Ethernet MAC functions. We introduce an alternative enhanced protection switching scheme to suppress penalty in the switching transient, in which the Ethernet MAC filtering database (FDB) is actively and directly modified by information disseminated from the nodes adjacent to failure. The modified FDB at all nodes are guaranteed to be consistent to form a complete new ring network topology immediately. This scheme can reduce the capacity requirement of the G.8032 by several times. This proposed scheme can be also applied in IP protection rings.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2003년도 춘계학술발표논문집 (중)
• /
• pp.1141-1144
• /
• 2003

Metro Ethernet 서비스는 기존의 라우터나 광전송장비를 거치지 않고 기가비트 이더넷으로 구성된 망을 이용해 스위치만으로 LAN과 같이 연결하는 서비스이다. 이 메트로 이더넷은 기존 SONET과는 달리 패킷교환 방식이므로 링크 대역폭의 효율적인 공유, 저렴한 칩과 장비, 사용자가 원하는 다양한 대역폭 할당, 피리고 인터넷 사용자의 증가와 원하는 대역폭의 증가로 등장하게 되었다. Metro Fiber Ethernet에 적용되는 기술로는 패킷분류화, 포트전송율 제어, QoS, 망복구 능련, 이더넷 VPN, 트래픽 엔지니어링 등이 있다. 본 논문에서는 이러한 기술들을 이용한 Metro Ethernet을 국방망에 적용함으로써 초고속 국방 통신망 구축을 제안하고자 한다.

• Journal of Communications and Networks
• /
• 제7권1호
• /
• pp.1-12
• /
• 2005

Ethernet is being deployed in metropolitan area networks (MANs) as a lower-cost alternative to SONET-based infrastructures. MANs are usually required to support common communication services, such as voice and frame relay, based on legacy synchronous TDM technology in addition to asynchronous packet data transport. This paper addresses the clock synchronization problem that arises when transporting synchronous services over an asynchronous packet infrastructure, such as Ethernet. A novel algorithm for clock synchronization is presented combining time-stamp methods used in the network time protocol (NTP) with signal processing techniques applied to measured packet interarrival times. The algorithm achieves the frequency accuracy, stability, low drift, holdover performance, and rapid convergence required for viable emulation of TDM circuit services over Ethernet.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 봄 학술발표논문집 Vol.30 No.1 (C)
• /
• pp.608-610
• /
• 2003

Ethernet PON(Passive Optical Network)에서 핵심 기술 중의 하나인 MAC(Media Access Control) 프로토콜은 ONU(Optical Network틴nit)들이 상향으로 트래픽을 전송할 때 공유되어 있는 링크상의 충돌을 방지하고, 효율적인 대역폭을 할당하기 위한 스케줄링 알고리즘을 포함하고 있다. 본 논문에서는 차세대 가입자 망인 Ethernet PON에서 상향으로의 대역폭 부족을 개선하기 위하여, n개의 파장을 사용한 가변 슬롯 할당 TDMA(Time Division Multiple Access) 방식의 MAC 프로토콜을 제안한다. 이를 검증하기 위하여 OPNET 시뮬레이션 도구를 이용해 Ethernet PON 모델을 설계하고 시뮬레이션 한다.

• 제어로봇시스템학회논문지
• /
• 제10권5호
• /
• pp.464-474
• /
• 2004

This paper proposes a middleware structure for the module-based personal robot, which can run on heterogeneous network interfaces and provides users easy interface-method regardless of underlying heterogeneous interfaces and convenient exchange of modules. The proposed middleware is divided into three layers of a streaming layer (SL), a network adaptation layer (NAL) and a network interface layer (NIL). The streaming layer manages application transactions using middleware services and provides user a uniform interfaces to the proposed middleware. The network adaptation layer manages a message-routing and provides naming service and it is a core of the proposed middleware. And the network interfaces layer manages dependent parts of heterogeneous network interfaces such as IEEE1394, USB, Ethernet, and CAN (Control Area Network). This paper implements the proposed middleware structure, where 3 types of interfaces of IEEE 1394, USB and Ethernet are used, and measures response times among those interfaces.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2386-2388
• /
• 2004

Recently, rapid process of network technology has an effect on the field of control engineering. And it gives effect to network control system(NCS) research that grafts existing control system and network has been studied. According to one-chip development of TCP/IP that is the most useful in LAN server for hardware, it can usefully and conveniently apply to network control system before. This paper construct network control system that can work close-loop control takes advantage of Ethernet that is the most for general data transmission network. Here, protocol uses for data transmission makes use for TCP/IP. This work the basic data transmitter-receive experiment to take advantage of network node was produced. And then, DC-motor can be control plant. Finally, I will prove to build speed control system of multiple DC-motor through Ethernet.

• 산업공학
• /
• 제20권4호
• /
• pp.427-437
• /
• 2007

As increasing the Internet traffic, many researches on access network are reported for end-to-end highspeed broadband network, where E-PON (Ethernet-Passive Optical Network) is one of reasonable candidates for the network with respect to cost and bandwidth utilization. For the high-speed access network, E-PON needs an efficient bandwidth allocation method. This paper describes a WFBA (Water-Filling Bandwidth Allocation) algorithm for the efficient bandwidth allocation with various simulation test. Based upon the simulation test, we suggest several ways to improve performance of E-PON.