• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.217-230
• /
• 2012

This paper propose interacting test programming methods between test equipment and hardware unit to verify function and performance of the hardware unit under test. Proposed test program can minimizes the risk of failures when the unit is mounted on the aircraft by testing and verifying the unit under the worst stress condition. Also, Object oriented design using UML make it easy to apply in other equipments. Test program consists of architecture package and hardware package. Architecture package is in a role for system management, log analysis, message receiving and message analysis. Messages that are used by system management define messages for testing and defined messages is sent and received to test equipment through Ethernet. Hardware package is in a role for hardware management that is needed to be tested and is related to a system. Hardware to be tested is divided into internal test and transmission test. Internal test inspects hardware itself and reports the test results to the test equipment. Transmission test inspects communication device by sending or receiving data. All kinds of test is done in the worst condition of the test unit executing in parallel. Each device is tested at least 482 times and at most 15,003 times about one hour. Test program is utilized in hardware reliability test like as environmental test or EMI test.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.557-565
• /
• 2005

This paper presents the development and implementation of a zero-copy file transfer mechanism that improves the efficiency of file transfers for PC cluster systems using hardware-based VIA(Virtual Interface Architecture) network adapters. VIA is one of the representative user-level communication interfaces, but because there is no library for file transfer, one copy occurs between kernel buffer and user boilers. Our mechanism presents a file transfer primitive that does not require the file system to be modified and allows the NIC to transfer data from the kernel buffer to the remote node directly without copying. To do this, we have developed a hardware-based VIA network adapter, which supports the PCI 64bit/66MHz bus and Gigabit Ethernet, as a NIC, and implemented a zero-copy file transfer mechanism. The experimental results show that the overhead of data coy and context switching in the sender is greatly reduced and the CPU utilization of the sender is reduced to $30\%\~40\%$ of the VIA send/receive mechanism. We demonstrate the performance of the zero-copy file transfer mechanism experimentally. and compare the results with those from existing file transfer mechanisms.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.7
• /
• pp.199-204
• /
• 2021

Digital substation refers to a substation that digitizes functions and communication methods of power facilities such as monitoring, measuring, control, protection, and operation based on IEC 61850, an international standard for the purpose of intelligent power grids. Based on the intelligent operating system, efficient monitoring and control of power facilities is possible, and automatic recovery function and remote control are possible in the event of an accident, enabling rapid power failure recovery. With the development of digital technology and the expansion of the introduction of eco-friendly renewable energy and electric vehicles, the spread of direct current distribution systems is expected to expand. MVDC is a system that utilizes direct current lines with voltage levels and transmission capacities between HVDCs applied to conventional transmission systems and LVDCs from consumers. Converting existing lines in substations, where most power equipment is alternating current centric, to direct current lines will reduce transmission losses and ensure greater current capacity. The process bus of a digital substation is a communication network consisting of communication equipment such as Ethernet switches that connect installed devices between bay level and process level. For MVDC linkage to existing digital substations, the process level was divided into two buses: AC and DC, and a system that can be comprehensively managed in conjunction with diagnostic IEDs as well as surveillance and control was proposed.

• Journal of KIISE:Information Networking
• /
• v.33 no.3
• /
• pp.277-287
• /
• 2006

Most of the existing broadband access networks based on DSL, cable modem, and Ethernet support the best-effort internet access service, and adopt the flat rate pricing mechanism. It is almost impossible to provide the differentiated communication services, in current broadband access networks, for the different users and/or the different application services. Currently, however, the advances in multimedia, communication, and security technologies push the interactive and/or streaming multimedia services and VPN services to be widely deployed over Internet, and they require more QoS-sensitive services than the best-effort service. Though various QoS technologies such as RSVP-based IntServ and DiffSern were already developed and under standardization in Internet world, it is impractical to replace the existing QoS-unaware access networks with the QoS-enabled ones at a time to deploy QoS-sensitive services. In this paper, after analyzing current broadband access network architectures and the status of QoS support, we propose a practical approach to support multimedia QoS in the broadband access networks. The approach will be based on the integration of the differentiated pricing and the DiffServ technology. And it will be a step-wise approach to support backward compatibility with the legacy broadband access networks as much as possible.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2337-2342
• /
• 2010

There is a vast field of application for RFID(Radio Frequency IDentification) technology. In the case of hospitals, RFID can be used for organizing patient data. Generally, patient data has been handled with medical cards. In order to look up data about a patient, the medical card would have to be found first, within a lot of other medical cards, by hand or with a computer. This is a very inconvenient system. Also, if the card is searched by the name of the patient, fatal medical accidents may occur in cases of mix-ups. If remote RFID Tag monitoring systems are applied in this case, the patient data would be accessible in the hospital. This article will discuss the grafting of RFID systems and wireless data communicating technology. The EM4095 chip, which uses 125KHz carrier waves was used in this study. And a Bluetooth module was added for wireless data communication. The ATMEGA128 microcomputer was used to control the RFID system and wireless module. A LCD monitor was connected to the extension port for nurses to view patient data, and also, the same information was displayed on PC monitors for doctors to see. The circuit was designed to consume minimal amounts of electricity for portability, and to transmit Tag ID's in environments with a lot of noise. The article is concluded with a diagram of the whole system, and performance of each data transmitting section has been analyzed.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.436-444
• /
• 2018

Currently, the new substation automation uses the international standard IEC 61850 communication protocol. KEPCO is also constructing a new substation based on IEC 61850 from 2013 through the pilot application and research and development starting from 2007. However, there are few cases where existing substations(Transformer, T/L GIS, D/L GIS, etc.) have been used, and RTU based substations operating systems have been changed to SA substations based on IEC 61850. Therefore, the introduction of IEC 61850 in existing substation facilities has the advantage of enhancing the substantiality of the substation by reusing existing facilities, improving the interoperability with the latest substations introduced, and converting existing substations into systems suitable for unmanned operation. In this paper, we introduce a case of changing the existing RTU based substation operation system to digital substation using IEC 61850 field information processor, Ethernet switch and SA operation system. Also, IEC 61850 client authentication program and Wireshark, which is a packet analysis tool, verify IEC 61850 conformance and its feasibility.

• Journal of Biomedical Engineering Research
• /
• v.29 no.1
• /
• pp.32-39
• /
• 2008

This paper reports on a realtime OS based master-slave configuration robot control system for laparoscopic surgery robot which enables telesurgery and overcomes shortcomings with conventional laparoscopic surgery. Surgery robot system requires control system that can process large volume information such as medical image data and video signal from endoscope in real-time manner, as well as precisely control the robot with high reliability. To meet the complex requirements, the use of high-level real-time OS (Operating System) in surgery robot controller is a must, which is as common as in many of modem robot controllers that adopt real-time OS as a base system software on which specific functional modules are implemened for more reliable and stable system. The control system consists of joint controllers, host controllers, and user interface units. The robot features a compact slave robot with 5 DOF (Degree-Of-Freedom) expanding the workspace of each tool and increasing the number of tools operating simultaneously. Each master, slave and Gill (Graphical User Interface) host runs a dedicated RTOS (Real-time OS), RTLinux-Pro (FSMLabs Inc., U.S.A.) on which functional modules such as motion control, communication, video signal integration and etc, are implemented, and all the hosts are in a gigabit Ethernet network for inter-host communication. Each master and slave controller set has a dedicated CAN (Controller Area Network) channel for control and monitoring signal communication with the joint controllers. Total 4 pairs of the master/slave manipulators as current are controlled by one host controller. The system showed satisfactory performance in both position control precision and master-slave motion synchronization in both bench test and animal experiment, and is now under further development for better safety and control fidelity for clinically applicable prototype.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1208-1213
• /
• 2006

A micro embedded did the task to be simply the sequent at the past. The necessity of an embedded operating system did not exist in the reason. We satisfy the complication of the system and operating system have been desired for the officer of the process. The necessity of the process of real-time processing increased also with fast response time to users, The porting follows and have been composed of an real-time embedded operating system. We can control the control unit with the sensor to be established in the building, An embedded web sever to use the resource of the at least is appering a networking facility of interaction. In this paper, The web sever to be implemented in a purity software. We draw data for the thing to implement overall demo to the remote through Internet and We put the point even though we organized the frame to control this. we have successfully ported linux on an embedded system, which is based on intel StrongARM SA-1110 processor, then written several network modules of ethernet-based network device.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.4
• /
• pp.18-29
• /
• 2015

The purposes of this research and development are as follows: first, to provide pleasant driving environments inside tunnels; second, to improve the current illumination environments lacking in diffusion luminance meters to meet tunnel lighting standards; and, third, to reduce the consumption of tunnel lighting energy accounting for approximately 65% of tunnel maintenance costs because of inadequate visual environments and tunnel operations. Further details are listed below. Firstly, an image luminance meter for tunnels that can implement the L20-method which is a tunnel luminance method that follows the international standards of CIE88, which was developed in order to improve and change the existing illumination-based tunnel lighting operation system to a luminance-based system. (The margin of error of below 5% according to the results of a test by an authorized agency and field test). Secondly, early illumination control is possible since the lighting control system that can be operated based on luminance enables interlocking control of the inside and outside of a tunnel using ethernet communication. Thirdly, guidelines for field application of the system are proposed. In addition, the luminance inducers of tunnels are found and the reflexibility of each facility that may reduce luminance of the boundaries is also proposed. Fourthly, as a result of a test bed, power consumption of luminance-based lighting operations decreased by 15.6% compared to illumination-based operations. Applying the feedback controls and maintenance factors of internal/external luminance meters, it reduced by 36.4%. Therefore, we became able to provide a luminance-based lighting operation system that complies with tunnel lighting design standards and provides a visual environment for drivers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.8
• /
• pp.1490-1494
• /
• 2006

Most network equipment is an embedded system designed to execute specific function. An embedded system is an electronic control system mixing hardware and software to execute only fixed function for the purpose of system, not confuter, performing diverse function for a wide use. Early embedded system executed only simple function, combining specific function with optimization, a micro size, and low power, but it has developed to meet complex and diverse system. The purpose of this study is to realize DHCP server based on embedded system. To achieve this, embedded Linux was ported in ez Bord-M01 mounted with Intel Strong ARM SA1110 processor, and ethernet-based network was constructed for network function. In this way, this study suggests embedded DHCP server where Window and Linux client hosts are dynamically configurated as network information by dynamically assigning network information in embedded board.