• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.1
• /
• pp.35-46
• /
• 1997

This paper describes a B-ISDN terminal adapter which provides B-ISDN adaptation functions for conventional services such as N-ISDN, video, connectionless data service in the ATM based B-ISDN. These services are provided individually or simultaneously. The B-ISDN terminal adapter offers interfaces of N-ISDN, video codec, Ethernet for supporting conventional services. And it provides various types of services which are available in conventional terminals and networks through B-ISDN. The AAL type 1 is used for N-ISDN and video services, the AAL type 3/4 and 5 are used for LAN service.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1575-1580
• /
• 2012

In this paper, a DVB-T2(Digital Video Broadcasting-the 2nd Generation Terrestrial) receiver is designed under a USB-type windows environment, and the baseband frames for MPEG2-TS stream(File or Ethernet Modes) are analyzed for verifying the receiver. In addition, the performance of the BICM(Bit Interleaved Coding & Modulation) module in the receiver is analyzed in terms of PLP(Physical Layer Pipe) and L1(Layer 1) signals.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.4
• /
• pp.167-174
• /
• 2003

This paper proposes a network processor especially optimized for content switching. With 2Gbps port capability, it integrates packet processor cluster, content-based classification engine and traffic manager on a single chip. A switch fabric architecture is also designed for scale-up of the network processor's capability over hundreds gigabit bandwidth. Applied in real network systems, the network processor shows wire-speed network address translator (NAT) and content-based switching performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.888-894
• /
• 2018

In this paper, we proposed a mixed-mode s-parameter measurement system for measuring the performance of twisted pairs. A twisted pair is a balanced type component, its characteristics can not be directly measured using network analyzer, which is generally implemented as a unbalanced type. It is possible to convert between balanced signal and unbalanced signal by using a balun but it restricts the frequency range of the measurement system. The proposed system measures the performance of twisted pairs by measuring mixed-mode s-parameters using a 4-port vector network analyzer and a designed fixture, without using a balun. We measured the performance of a commercial Ethernet cable and compared with the results which measured by using baluns. The results showed that the proposed system is capable of measuring the performance of twisted pairs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.3
• /
• pp.236-240
• /
• 2004

We have implemented image monitoring system on PXA255 processor based embedded board that is ported QT/Embedded 2.3.7 version. User is able to monitor camera's capture image for widely separated host PC at client PXA255 board target board by ethernet communication method. And we designed PCI interface card that control motor for camera's Pan & Tilt. Bitmap format's images of $320\times{240}$ size are displayed on PXA255 board's TFT-LCD and User is able to monitor wanted position's image by touch screen input method.

• Nuclear Engineering and Technology
• /
• v.46 no.5
• /
• pp.667-674
• /
• 2014

One of the largest problems for tokamak devices such as Kazakhstan Tokamak for Material Testing (KTM) is the operation scenarios' development and execution. Operation scenarios may be varied often, so a convenient hardware and software solution is required for scenario management and execution. Dozens of diagnostic and control subsystems with numerous configuration settings may be used in an experiment, so it is required to automate the subsystem configuration process to coordinate changes of the related settings and to prevent errors. Most of the diagnostic and control subsystems software at KTM was unified using an extra software layer, describing the hardware abstraction interface. The experiment sequence was described using a command language. The whole infrastructure was brought together by a universal communication protocol supporting various media, including Ethernet and serial links. The operation sequence execution infrastructure was used at KTM to carry out plasma experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.586-589
• /
• 2017

The vibration monitoring system using the sensor network is used in various fields. However, in case of the vibration of the existing products, the size of the monitoring system is increased due to the separation of the sensor data collection function and the communication function. In this paper, we design and implement a lightweight vibration monitoring system using the MQTT protocol, which is oneM2M device standard protocol for the Arduino and Ethernet modules, to monitor frequent earthquakes and vibrations in narrow places.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.6
• /
• pp.577-586
• /
• 2011

This paper describes the development of hardware simulator for the operation analysis of DC microgrid. The hardware simulator consists of several distributed power sources such as a wind power generation, solar power and fuel cell, and two energy storages such as a supercapacitor and battery. The main controller which performs a role of energy management and state monitoring is connected with the local controller in each power source and storage through ethernet-based communication link. The developed hardware simulator can be utilized to analyze the performance DC microgrid with practical manner.

• The KIPS Transactions:PartC
• /
• v.12C no.2 s.98
• /
• pp.261-266
• /
• 2005

This paper proposes two systems. One is a Home Gateway(HG) which efficiently connects and controls digital appliances in the home network environments. The other is a Management Server(MS) that overcomes the physical limitation of the HG. The HG supports networking modules(TCP/IP for Ethernet, ADSL), home networking functions(HomePNA, IEEE1394 PLC) and telecommunication system(PSTN/SLT, VoIP, Video Communication). The HG is expected to be a core device for the integrated digital home environments. The MS is a dedicated server which manages and controls individual HG, home appliances and HA devices implemented at an area.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.436-447
• /
• 2014

The major elements of avionics system architecture are requirements, Real Time Operating System, message communication, memory, and data format etc. Herein describes a state-of-the-art development trend for the avionics system architecture, system requirements and data bus among the major elements of avionics system. While, domestic technology has been tried to Integrated Modular Avionics(IMA) system based on the Avionics Full Duplex Switched Ethernet(AFDX) technology during Light Attack Helicopter(LAH) project in Korea, but not yet proved as the product case in Full Scale Development Phase. The avionics system architecture considering the domestic inexperience of the IMA system architecture are suggested for the Next-generation Corps Unmanned Aircraft System.