• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.1
• /
• pp.82-88
• /
• 2011

Lean combustion and exhaust emission characteristics in a ethanol fueled spark-ignited engine according to ethanol-gasoline fuel blending ratio were investigated. The test engine was $1591cm^3$ and 10.5 of compression ratio SI engine with 4 cylinders. In addition, lambda sensor system was connected with universal ECU to control the lambda value which is varied from 1.0 to 1.5. The engine performance and lean combustion characteristics such as brake torque, cylinder pressure and rate of heat release were investigated according to ethanol-gasoline fuel blending ratio. Furthermore, the exhaust emissions such as carbon monoxide (CO), unburned hydrocarbon (HC), nitrogen oxides ($NO_x$) and carbon dioxide ($CO_2$) were measured by emission analyzers. The results showed that the brake torque, cylinder pressure and the stability of engine operation were increased as ethanol blending ratio is increased. Brake specific fuel consumption (BSFC) was increased in higher ethanol blending ratio while brake specific energy consumption (BSEC) was decreased in higher ethanol blending ratio. The exhaust emissions were decreased as ethanol blending ratio is increased under overall experimental conditions, however, some specific exhaust emission characteristics were mainly influenced by lambda value and ethanol-gasoline fuel blending ratio.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.2
• /
• pp.140-145
• /
• 2006

The behaviour of alginate immobilized and soluble watermelon (Citrullus vulgaris) urease in water miscible organic solvents like, acetonitrile, dimethylformamide (DMF), ethanol, methanol, and propanol is described. The organic solvents exhibited a concentration dependent inhibitory effect on both the immobilized and the soluble urease in the presence of urea. Pretreatment of soluble enzyme preparations with organic solvents in the absence of substrate for 10 min at $30^{\circ}C$ led to rapid loss in the activity, while similar pretreatment of immobilized urease with 50% (v/v) of ethanol, propanol, and acetonitrile was ineffective. Time-dependent inactivation of immobilized urease, both in the presence and in the absence of urea, revealed stability for longer duration of time even at very high concentration of organic solvents. The soluble enzyme, on the other hand, was rapidly inactivated even at fairly lower concentrations. The results suggest that the immobilization of watermelon urease in calcium alginate make it suitable for its application in organic media. The observations are discussed.

• Particle and aerosol research
• /
• v.6 no.1
• /
• pp.37-46
• /
• 2010

Cu nano-colloid was prepared by wire electric explosion process under de-mineralized water and anhydrous ethanol. To control the properties of Cu nano-colloid, experimental conditions such as diameter of Cu wire and applied voltage were changed. The optimal Cu nano-colloid was prepared when the 0.1mm diameter of Cu wire with the applied voltage of 2000 V was used. The shape of Cu particles in colloid was spherical and the XRD result revealed that the phase of Cu particles was cubic phase. About 20nm Cu nanoparticles with high crystallinity were successfully prepared using wire explosion process under anhydrous ethanol and they showed more than 100 hours dispersion stability.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.12
• /
• pp.1421-1427
• /
• 1999

4-Hydroxy-4'-methoxyazobenzene and 4-hydroxy-4'-cyanoazobenzene were synthesized from phenol with p-anisidine and p-aminobenzonitrile through a diazotization reaction, respectively. They were reacted with 2-chloroethanol, 2-(2-chloroethoxy)ethanol, or 2-[2-(2-chloroethoxy)ethoxy]ethanol to produce six kinds of new mesogenic alcohols having an azobenzene group that is sensitive to the ultraviolet. Twelve kinds of new photoresponsive monomers with two symmetrical mesogens were prepared by the reaction of the mesogenic alcohols with fumaric acid or maleic acid through a Mitsunobu reaction. The resulting monomers have different length of flexible ethyleneoxy spacer tethered to azobenzene group. The length of the spacer affected their thermal stability, solubility, and phase transition temperature. Structures of the monomers were identified by FT-IR and ¹H-NMR spectra. Their phase transition temperatures and thermal stability were also investigated by a differential scanning calorimetry (DSC) and a thermogravimetric analysis (TGA). From an optical polarizing microscopy, all the prepared monomers except fumarate-1 and maleate-1 were found to show enantiotropic liquid crystallinity with a smectic texture like focal-conic, fan-shaped, and batonnet textures.

• Food Science and Preservation
• /
• v.21 no.3
• /
• pp.427-433
• /
• 2014

Ethanol and hot water extracts were prepared from Lindera obtusiloba Blume (LO) and Zanthoxylum piperitum DC (ZP) and used to evaluate their antimicrobial activities and thermal stability against six foodborne pathogens (3 gram-positive and 3 gram-negative bacteria). The antimicrobial activities were assessed using the agar diffusion method, and the thermal stabilities of extracts were examined after heat treatment at 60, 70, 80, and $100^{\circ}C$ for 10 min. The zones of inhibition by the LO extract or the ZP extract of the tested microorganisms were in the range of 21-30 mm and 19-25 mm, respectively, at 100 mg/mL concentrations. The 60% ethanol extract and the hot water extracts from LO showed the strongest antimicrobial effects against MRSA and Staphylococcus aurues, respectively. For the extract from ZP, the strongest antimicrobial effect was shown against S. aurues by 60% ethanol, and the weakest antimicrobial effect was shown against E. coli by the hot water extracts. The ZP extracts showed that the gram-positive bacteria were more sensitive than gram-negative bacteria. For the thermal stability of the extracts, the antimicrobial effects stabilized after heat treatment. Overall, the data suggest that the extracts have a potential for application in various food products for which a natural antimicrobial additive is desired.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.289-294
• /
• 2015

In this research, water and ethanol extract of Momordica charantia shells, fruits and seeds were tested to see possibility as natural functional cosmetic agent. Water and ethanol extract showed 69.45 mg/g and 70.87 mg/g polyphenol concentration, respectively. Momordica charantia water and ethanol extracts did not indicate cell toxicity up to $1,000{\mu}g/ml$ concentration in MTT assay. Tyrosinase inhibition effects of water and ethanol extract were lower than arbutin, however, ethanol extract showed better DOPA oxidation inhibition effect than arbutin. Elastase inhibition effects of ethanol extract displayed similar efficacy with adenosine at higher concentrations. Solution formulations (5% extract) were stable for 28 days in both extracts, however, lotion formulation (1% extract) showed considerable variation in viscosity whereas ethanol extraction indicated relative stability. In conclusion, water and ethanol extract of Momordica charantia shells, fruits and seeds indicated strong possibility for whitening and antiwrinkle functional cosmetic ingredient.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.12
• /
• pp.2060-2065
• /
• 2016

Characteristics of E. coli O157:H7-specific infection bacteriophages (O157 coliphages) and broad-host-range bacteriophages for other E. coli serotypes (broad-host coliphages) were compared. The burst sizes of the two groups ranged from 40 to 176 PFU/infected cell. Distributions of the virulence factors stx1, stx2, ehxA, and saa between the two groups were not differentiated. Broad-host-range coliphages showed lower stability at $70^{\circ}C$, in relation to O157 coliphages. However, O157 coliphages showed high acid and ethanol tolerance by reduction of only 22% and 11% phages, respectively, under pH 3 and 70% ethanol for 1 h exposure. Therefore, these results revealed that the O157 coliphages might be more stable under harsh environments, which might explain their effective infection of the acid-tolerant E. coli O157:H7.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.5
• /
• pp.441-448
• /
• 1998

A cellobiose-utilizing recombinant yeast having $\beta$-glucosidase activity was developed for ethanol production from a mixture of glucose and cellobiose. Using $\delta$-sequences of Tyl transposon of yeast as target sites for homologous recombination, a heterologous gene of $\beta$-glucosidase was integrated into the chromosome of Saccharomyces cerevisiae. The $\delta$-integrated recombinant yeast, Saccharomyces cerevisiae L2612 (Pb-BGL), showed perfect mitotic stability even in nonselective media and showed ca. 1.5 fold higher $\beta$-glucosidase activity than the recombinant yeast harboring the $2\mu$-based plasmid vector system. A mathematical model was developed to describe the $\beta$-glucosidase formation and ethanol production from the Saccharomyces cerevisiae L2612 ($p\delta-BGL$). The model newly described that the heterologous $\beta$-glucosidase production mediated by ADH1 promoter is regulated by glucose and repressed by ethanol.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.1
• /
• pp.127-132
• /
• 2001

This research was conducted to investigate the antimicrobial activities of ethanol extracts from omija against the 12 icroorganism including bacteria, yeast and mold. The extracts inhibited the growth of bacteria, but not yeast or mold. Minimum bactericidal concentration (MBC) of B. subtilis and S. aureus was 1.6~3.2 mg/mL, and those of gram(-) bacteria, including E. coli, were 6.3~12.5 mg/mL. Growth of B. subtilis and S. aureus were retarded by adding 900 ppm and 300 ppm of ethanol extracts. Anthimicrobial activity of the ethanol extracts was not destroyed by heating. In comparison of endocarps extracts with the ethanol from the seed extracts, the ethanol extracts of endocarps showed the high antimicrobial activity.

• Journal of Environmental Health Sciences
• /
• v.17 no.1
• /
• pp.120-128
• /
• 1991

Saccharomyces cerevisiae was immobilized by incubating iron oxides with calcium alginate, and by polyacrylamide entrapment to use repeatedly for the conversion of glucose to ethanol. Magnetic and non-magnetic immobilized yeast and polyacrylamide immobilized yeast were compared with the native yeast a batch-fermentation of ethanol from glucose. Three kinds of immobilized yeast tended almost identically, having ethanol productivity as well as the final yield about the same to what was found for the native yeast. The long-term operational stability of three kinds of immobilized yeast were significant difference according as immobilized yeast activation or non-activation before ethanol fermentation. In the non-activation they lost their activity of fermentation rapidly in the beginning stage an slower at a later stage. On the other hand, in the activation with nutrient media, their activities were increased to some extent and stable in the later stage. The cell count of three kinds of immobilized yeast after activiation by incubating nutrient media, increased by a factor of about 45 to 48, whereas the fermenting capacity increased by a factor of 174 to 178. In the prearation of immobilized biocatalysts, magnetic matter does not seem to have any adverse affect on the properties of the microorganism. The immobilized biocatalysts by utilizing magnetic matter have some advantages, especially in application of viscous media or insoluble particle-containing media, for this work was linked with microbial utilization of environmental wastes and elimination of envirnmental pollutant.