• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.506-516
• /
• 1998

In this paper, an algorithm is proposed to detect the malfunction of plasma-etching characteristics using EPD signal trajectories. EPD signal trajectories offer many information on plasma-etching process state, so they must be considered as the most important data sets to predict the wafer states in plasma-etching process. A recent work has shown that EPD signal trajectories were successfully incorporated into process modeling through critical parameter extraction, but this method consumes much effort and time. So Principal component analysis(PCA) can be applied. PCA is the linear transformation algorithm which converts correlated high-dimensional data sets to uncorrelated low-dimensional data sets. Based on this reason neural network model can improve its performance and convergence speed when it uses the features which are extracted from raw EPD signals by PCA. Wafer-state variables, Critical Dimension(CD) and uniformity can be estimated by simulation using neural network model into which EPD signals are incorporated. After CD and uniformity values are predicted, proposed algorithm determines whether malfunction values are produced or not. If malfunction values arise, the etching process is stopped immediately. As a result, through simulation, we can keep the abnormal state of etching process from propagating into the next run. All the procedures of this algorithm can be performed on-line, i.e. wafer to wafer.

• 한국정보통신학회논문지
• /
• 제24권2호
• /
• pp.321-324
• /
• 2020

In this work, we developed a selective etching process for GaN that is a key process in p-GaN/AlGaN/GaN enhancement-mode (E-mode) power switching field-effect transistor (FET) fabrication. In order to achieve a high current density of p-GaN/AlGaN/GaN E-mode FET, the p-GaN layer beside the gate region must be selectively etched whereas the underneath AlGaN layer should be maintained. A selective etching process was implemented by oxidizing the surface of the AlGaN layer and the GaN layer by adding O2 gas to Cl2/N2 gas which is generally used for GaN etching. A selective etching process was optimized using Cl2/N2/O2 gas mixture and a high selectivity of 53:1 (= GaN/AlGaN) was achieved.

• 대한전자공학회논문지SD
• /
• 제39권1호
• /
• pp.31-38
• /
• 2002

0.35㎛-비아(via) 식각공정을 개선하기 위하여 C₂F/sub 6/가스의 식각특성을 분석하였다. 실험한 재료는 TEOS/SOG/TEOS 막을 올린 8인치 웨이퍼이며, 실험의 기법은 직교행열(Orthogonal array matrix) 실험 방식을 활용하였다. 산화막 식각에 이용된 장비는 transformer coupled plasma(TCP) source 방식이며 고밀도 플라즈마(HDP)장비이다. 실험의 결과는, 실험변수의 범위 내에서 C₂F/sub 6/는 0.8㎛/min-1.l㎛/min 범위의 식각속도를 보이며 균일도(Uniformity)는 ±6.9%미만으로 측정되었다. CD 변화(skew)는 식각 전과 후를 비교하여 10% 미만이었고 그 결과 비등방성(anisotropic) 식각의 특성이 우수하였다. C₂F/sub 6/를.20sccm 공급할 때 문제점이 발견되지 않았지만 14sccm을 공급하면 SOG 막의 내벽이 침식당하는 문제점이 있었다. 결과적으로 C₂F/sub 6/는 HDP TCP에서 빠른 식각비와 넓은 공정창(process window)을 가진 식각특성을 나타내었다.

• 청정기술
• /
• 제9권3호
• /
• pp.101-105
• /
• 2003

MEMS(Micro Electro Mechanical System) 기술에서 실리콘 식각기술의 중요성으로 플라즈마 식각기술의 개발이 꾸준히 진행되고 있다. 본 연구에서는 ICP(Inductive Coupled Plasma)를 이용하여 플라즈마를 발생시켜, 이온에너지를 증가시키지 않고도 이온밀도를 높이고 이온입자들에 의한 식각의 방향성을 가할 수 있는 새로운 플라즈마 기술을 이용하였다. 이같이 플라즈마를 이용하여 실리콘웨이퍼를 식각하여 제조하는 MEMS 응용분야는 다양하나, 본 연구에서는 미생물배양에 응용할 수 있는 PCR(Polymerase Chain Reaction)장치 제작을 위한 식각에 이용하였다. Platen power, Coil power 및 Process pressure에 다양한 변화를 주어 각 변수에 따른 식각속도를 관찰하였다. 각 공정별 변수를 변화시킨 결과 Platen 12W, Coil power 500W, 식각/Passivation Cycle 6/7sec 일 경우 식각속도는 $1.2{\mu}m/min$ 이었고, sidewall profile은 $90{\pm}0.7^{\circ}$로 나타나 매우 우수한 결과를 보였다. 분 연구에 SF6를 식각에 이용하였으며 공정의 최적화를 통하여 사용량을 최소화하여환경영향이 최소가 될 수 있는 가능성이 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.118-119
• /
• 2009

This paper presents the feature profile evolution silicon deep trench etching, which is very crucial for the commercial wafer process application. The silicon deep trenches were etched with the SF6 gas & Hbr gas based process recipe. The optimized silicon deep trench process resulted in vertical profiles (87o~90o) with loading effect of < 1%. The process recipes were developed for the silicon deep trench etching applications. This scheme provides vertically profiles without notching of top corner was observed. In this study, the production of SF6 gas based silicon deep trench etch process much more strongly than expected on the basis of Hbr gas trench process that have been investigated by scanning electron microscope (SEM). Based on the test results, it is concluded that the silicon deep trench etching shows the sufficient profile for practical MOS FET silicon deep trench technology process.

• 한국진공학회지
• /
• 제1권1호
• /
• pp.37-42
• /
• 1992

16M/64M DRAM 제조공정에 적용할 수 있는 ECR 방식의 플라즈마 etcher를 개발 하여 Poly-Si 식각공정에 적용하였다. 공정압력, 사용가스 및 초고주파 전력의 공정변수 변 화에 따른 Poly-Si의 식각율 및 선택비 변화를 조사하였다. 초고주파의 전력이 증가할수록 식각율과 Oxide에 대한 선택비가 증가하는 경향을 보였으며 6mT의 공정압력에서 최적치를 보였다. 공정가스 SF6/SF6 + Cl2의 값이 증가할수록 식각율 및 선택비의 감소가 있었으며 이는 최적 공정변수를 찾지 못하였기 때문으로 분석된다.

• Corrosion Science and Technology
• /
• 제2권4호
• /
• pp.189-193
• /
• 2003

The Ru etching using $O_2/C_{12}$ plasmas has been studied by employing the helicon etcher. The changes of Ru etch rate, Ru to $SiO_2$ etch selectivity and Ru electrode etching slope with varied process variables were investigated. The Ru etching slope at the optimized etching condition was measured to be $84^{\circ}$. We reveal that the Ru etching using $O_2/C_{12}$ plasma generates the $RuO_2$ thin film. Possible mechanism of Ru etching is discussed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.68-71
• /
• 2000

In this paper, we have measured the oxygen contents by FTIR in silicon wafer various process technology(slicing, lapping, polishing). The measured data are also compared with the data of etching process(KOH, Bright etching). Also we have measured the surface morpology in backside silicon wafer after etching treatment and etch pit density due to OISF after 4 step high temperature annealing process with optical microscope.

• 한국재료학회지
• /
• 제22권9호
• /
• pp.482-488
• /
• 2012

To fabricate a precise micro metal mold, the electrochemical etching process has been researched. We investigated the electrochemical etching process numerically and experimentally to determine the etching tendency of the process, focusing on the current density, which is a major parameter of the process. The finite element method, a kind of numerical analysis, was used to determine the current density distribution on the workpiece. Stainless steel(SS304) substrate with various sized square and circular array patterns as an anode and copper(Cu) plate as a cathode were used for the electrochemical experiments. A mixture of $H_2SO_4$, $H_3PO_4$, and DIW was used as an electrolyte. In this paper, comparison of the results from the experiment and the numerical simulation is presented, including the current density distribution and line profile from the simulation, and the etching profile and surface morphology from the experiment. Etching profile and surface morphology were characterized using a 3D-profiler and FE-SEM measurement. From a comparison of the data, it was confirmed that the current density distribution and the line profile of the simulation were similar to the surface morphology and the etching profile of the experiment, respectively. The current density is more concentrated at the vertex of the square pattern and circumference of the circular pattern. And, the depth of the etched area is proportional to the current density.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.111-117
• /
• 2008

We have studied surface roughness, contamination of impurity, bonding with some gas element, reflectance and zeta potential on masks to be generated or changed during photolithography/dry or wet etching process. Mask surface roughness was not changed after photolithography/dry etching process. But surface roughness was changed on some area under MoSi film of Cr/MoSi/Qz. There was not detected any impurity on mask surface after plasma dry etching process. Reflectance of mask was increased after variable plasma etching treatment, especially when mask was treated with plasma including $O_2$ gas. Blank mask was positively charged when the mask was treated with Cr plasma etching gas($Cl_2:250$ sccm/He:20 $sccm/O_2:29$ seem, source power:100 W/bias power:20 W, 300 sec). But this positive charge was changed to negative charge when the mask was treated with $CF_4$ gas for MoSi plasma etching, resulting better wet cleaning. There was appeared with negative charge on MoSi/Qz mask treated with Cr plasma etching process condition, and this mask was measured with more negative after SC-1 wet cleaning process, resulting better wet cleaning. This mask was charged with positive after treatment with $O_2$ plasma again, resulting bad wet cleaning condition.