• The Korean Journal of Applied Statistics
• /
• v.23 no.5
• /
• pp.967-975
• /
• 2010

Since the least squares estimation is not appropriate when multicollinearity exists among the regressors of the linear regression model, the principal components regression is used to deal with the multicollinearity problem. This article suggests a new procedure for the selection of suitable principal components. The procedure is based on the condition index instead of the eigenvalue. The principal components corresponding to the indices are removed from the model if any condition indices are larger than the upper limit of the cutoff value. On the other hand, the corresponding principal components are included if any condition indices are smaller than the lower limit. The forward inclusion method is employed to select proper principal components if any condition indices are between the upper limit and the lower limit. The limits are obtained from the linear model which is constructed on the basis of the conjoint analysis. The procedure is evaluated by Monte Carlo simulation in terms of the mean square error of estimator. The simulation results indicate that the proposed procedure is superior to the existing methods.

• Journal of Korea Water Resources Association
• /
• v.34 no.4
• /
• pp.357-364
• /
• 2001

Sometimes the observed data is too small to discriminate it from noise of the instrument. Say, the data can be recorded as below DL(Detection Level) value. Even though the data below Detection Level(BDL) is small vague, it can be resulted in wrong estimates for mean and variance. However, in practice, the BDL data is generally eliminated as N.D. (Not Detected) and do not record it in Korea. This study investigates the distributions according to the data values of ammonia concentration (NH$_3$-N) in Puyeo intake. Also we try to find out DL value and an appropriate method for the estimations of mean and variance of BDL values that can be discriminate the distributions. The DL is estimated by trial and error method. The appropriate method for the estimations of mean and variance of above the detection level(ADL)and BDL dada sets is selected, and the mean and variance are estimated. As a result, it is found that the Bias Corrected Maximum Likelihood Estimator is the most accurate method for NH$_3$-N in Puyeo intake.

• Journal of KIISE
• /
• v.43 no.8
• /
• pp.835-840
• /
• 2016

Monte Carlo ray tracing has been widely used for simulating a diverse set of photo-realistic effects. However, this technique typically produces noise when insufficient numbers of samples are used. As the number of samples allocated per pixel is increased, the rendered images converge. However, this approach of generating sufficient numbers of samples, requires prohibitive rendering time. To solve this problem, image filtering can be applied to rendered images, by filtering the noisy image rendered using low sample counts and acquiring smoothed images, instead of naively generating additional rays. In this paper, we proposed a Stein's Unbiased Risk Estimator (SURE) based $\grave{A}$-Trous wavelet to filter the noise in rendered images in a near-interactive rate. Based on SURE, we can estimate filtering errors associated with $\grave{A}$-Trous wavelet, and identify wavelet coefficients reducing filtering errors. Our approach showed improvement, up to 6:1, over the original $\grave{A}$-Trous filter on various regions in the image, while maintaining a minor computational overhead. We have integrated our propsed filtering method with the recent interactive ray tracing system, Embree, and demonstrated its benefits.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.1
• /
• pp.14-22
• /
• 1994

This paper proposes two Bayes estimators and their evaluation algorithms of the software reliability at the end testing stage in the Smith's Bayesian software reliability growth model under the data prior distribution BE(a, b), which is more general than uniform distribution, as a class of prior information. We consider both a squared-error loss function and the Harris loss function in the Bayesian estimation procedures. We also compare the MSE performances of the Bayes estimators and their algorithms of software reliability using computer simulations. And we conclude that the Bayes estimator of software reliability under the Harris loss function is more efficient than other estimators in terms of the MSE performances as a is larger and b is smaller, and that the Bayes estimators using the beta prior distribution as a conjugate prior is better than the Bayes estimators under the uniform prior distribution as a noninformative prior when a＞b.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10A
• /
• pp.1147-1158
• /
• 2004

In this paper we design STBC-OFDM systems by applying several STBC schemes to the OFEM system and show their comparative analysis results obtained through computer simulations under Rayleigh fading environments, considering the effect of channel estimation error. We first consider the space-time coding algorithms of major STBC schemes, together with their demodulation algorithms. We then select the OFDMparameters considering mobile environments and design the STBC-OFDM systems by choosing one of digital modulation schemes such as QPSK, BPSK, 16QAM, 64QAM, and 256QAM according to the transmission rate, and describe the block diagrams of the demodulator and channel estimator. We finally compare and analyze the BER performances of the STBC-OFDM systems according to the transmission rate and the number of receive antennas.

• International Journal of Computer Science & Network Security
• /
• v.23 no.7
• /
• pp.1-8
• /
• 2023

An Orthogonal Frequency Division Multiplexing (OFDM) based wireless communication system has drawn wide attention for its high transmission rate and high spectrum efficiency in not only radio but also Underwater Acoustic (UWA) applications. Because of the narrow sub-carrier spacing of OFDM, orthogonality between sub-carriers is easily affected by Doppler effect caused by the movement of transmitter or receiver. Previously, Doppler compensation signal processing algorithm for Desired propagation path was proposed. However, other Doppler shifts caused by delayed Undesired signal arriving from different directions cannot be perfectly compensated. Then Receiver Bit Error Rate (BER) is degraded by Inter-Carrier-Interference (ICI) caused in the case of Multi-path Doppler channel. To mitigate the ICI effect, a modified Delay and Doppler Profiler (mDDP), which estimates not only attenuation, relative delay and Doppler shift but also sampling clock shift of each multi-path component, is proposed. Based on the outputs of mDDP, an ICI canceling multi-tap equalizer is also proposed. Computer simulated performances of one-tap equalizer with the conventional Time domain linear interpolated Channel Transfer Function (CTF) estimator, multi-tap equalizer based on mDDP are compared. According to the simulation results, BER improvement has been observed. Especially, in the condition of 16QAM modulation, transmitting vessel speed of 6m/s, two-path multipath channel with direct path and ocean surface reflection path; more than one order of magnitude BER reduction has been observed at CNR=30dB.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.8-15
• /
• 2019

The PM synchronous motor drives with vector control have been applied to wide fields of industry applications due to its high efficiency. The rotor position information for vector control of a PM synchronous motor is detected from the rotor position sensors or rotor position estimators. The sensorless control based on the mathematical model of PM synchronous motor is generally used and it can be classified into back EMF -based sensorless control and magnet flux-based sensorless control. The rotor position estimating performance of the back EMF-based sensorless control is deteriorated at low speeds since the magnitude of back EMF is proportional to the motor speed. The magnitude of the magnet flux for estimating rotor position in the flux-based sensorless control is independent on the motor speed so that the estimating performance is excellent for wide speed ranges. However, the estimation performance of the model-based sensorless control may be influenced by the motor parameter variation since the rotor position estimator uses the mathematical model of the PM synchronous motor. In this paper, the rotor position estimation performance for the back EMF based- and flux-based sensorless controls is analyzed theoretically and is compared through the simulation and experiment when the motor parameters including stator resistance and inductance are varied.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.11
• /
• pp.457-464
• /
• 2021

The advent of the big data era has enabled the rapid development of deep learning that learns rules by itself from data. In particular, the performance of CNN algorithms has reached the level of self-adjusting the source data itself. However, the existing image processing method only deals with the image data itself, and does not sufficiently consider the heterogeneous environment in which the image is generated. Images generated in a heterogeneous environment may have the same information, but their features may be expressed differently depending on the photographing environment. This means that not only the different environmental information of each image but also the same information are represented by different features, which may degrade the performance of the image analysis model. Therefore, in this paper, we propose a method to improve the performance of the image color constancy model based on Adversarial Learning that uses image data generated in a heterogeneous environment simultaneously. Specifically, the proposed methodology operates with the interaction of the 'Domain Discriminator' that predicts the environment in which the image was taken and the 'Illumination Estimator' that predicts the lighting value. As a result of conducting an experiment on 7,022 images taken in heterogeneous environments to evaluate the performance of the proposed methodology, the proposed methodology showed superior performance in terms of Angular Error compared to the existing methods.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.3
• /
• pp.182-196
• /
• 2023

Accurate and timely estimation of crop yields is crucial for various purposes, including global food security planning and agricultural policy development. Remote sensing techniques, particularly using vegetation indices (VIs), have show n promise in monitoring and predicting crop conditions. However, traditional VIs such as the normalized difference vegetation index (NDVI) and enhanced vegetation index (EVI) have limitations in capturing rapid changes in vegetation photosynthesis and may not accurately represent crop productivity. An alternative vegetation index, the near-infrared reflectance of vegetation (NIRv), has been proposed as a better predictor of crop yield due to its strong correlation with gross primary productivity (GPP) and its ability to untangle confounding effects in canopies. In this study, we investigated the potential of NIRv in estimating crop yield, specifically for corn and soybean crops in major crop-producing regions in 14 states of the United States. Our results demonstrated a significant correlation between the peak value of NIRv and crop yield/area for both corn and soybean. The correlation w as slightly stronger for soybean than for corn. Moreover, most of the target states exhibited a notable relationship between NIRv peak and yield, with consistent slopes across different states. Furthermore, we observed a distinct pattern in the yearly data, where most values were closely clustered together. However, the year 2012 stood out as an outlier in several states, suggesting unique crop conditions during that period. Based on the established relationships between NIRv peak and yield, we predicted crop yield data for 2022 and evaluated the accuracy of the predictions using the Root Mean Square Percentage Error (RMSPE). Our findings indicate the potential of NIRv peak in estimating crop yield at the county level, with varying accuracy across different counties.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.455-465
• /
• 2011

In order to assess and mitigate climate change, the role of forest biomass as carbon sink has to be understood spatially and quantitatively. Since existing forest statistics can not provide spatial information about forest resources, it is needed to predict spatial distribution of forest biomass under an alternative scheme. This study focuses on developing an upscaling method that expands forest variables from plot to landscape scale to estimate spatially explicit aboveground biomass(AGB). For this, forest stand variables were extracted from National Forest Inventory(NFI) data and used to develop AGB regression models by tree species. Dominant/codominant height and crown density were used as explanatory variables of AGB regression models. Spatial distribution of AGB could be estimated using AGB models, forest type map and the stand height map that was developed by forest type map and height regression models. Finally, it was estimated that total amount of forest AGB in Danyang was 6,606,324 ton. This estimate was within standard error of AGB statistics calculated by sample-based estimator, which was 6,518,178 ton. This AGB upscaling method can provide the means that can easily estimate biomass in large area. But because forest type map used as base map was produced using categorical data, this method has limits to improve a precision of AGB map.