• Journal of ILASS-Korea
• /
• v.21 no.4
• /
• pp.207-213
• /
• 2016

To protect air pollution of urban area from motor vehicles, emission limits for diesel vehicles have been dramatically lowered in short period. But recent studies have shown that on-road NOx emissions of light-duty diesel vehicles are considerably higher than the values measured with laboratory test procedures used for emission certification. To tackle with this issue, Ministry of Environment have a plan to introduce EU RDE-LDV (Real-driving Emission-Light-duty Vehicle) regulation. In this study, 4 Euro 6 diesel vehicles have been tested with the new test procedures published by EU to estimate on-road NOx emissions using PEMS (Portable Emission Measurement System). The results have shown that the requirements of EU RDE-LDV could be met in driving condition of metropolitan area for constitution of test routes and validity of test results. In analysing with Moving Averaging Window method the completeness and normality of test data were validated with the requirement. On-road NOx emissions were quite deviated as test vehicles and higher than the new limit of on-road NOx emission enforced from Sept. 2017, which means that RDE-LDV can effectively reduce NOx emission of diesel vehicles in real driving conditions of Korea.

• Journal of Korea Water Resources Association
• /
• v.32 no.3
• /
• pp.247-254
• /
• 1999

The frequency analyses of annual maximum rainfall data for 22 rainfall gauging stations is Korea were performed. The method of moments (MOM), maximum likelihood (ML), and probability weighted moments (PWM) were used in parameter estimation. The GEV distribution was selected as an appropriate model for annual maximum rainfall data based on parameter validity condition, graphical analysis, separation effect, and goodness of fit tests. For the selected GEV model, spatial analysis was performed and rainfall intensity-duration-frequency equation was derived by using linearization technique. The derived rainfall intensity-duration-frequency equation can be used for estimating rainfall quantiles of the selected stations with convenience and reliability in practice.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2823-2834
• /
• 2023

Austenitic stainless steel welds (ASSWs) of nuclear components undergo aging-related degradations caused by high temperature and neutron radiation. Since irradiation leads to the change of material characteristics, relevant quantification is important for long-term operation, but limitations exist. Although ion irradiation is utilized to emulate neutron irradiation, its penetration depth is too shallow to measure bulk properties. In this study, a systematic approach was suggested to estimate mechanical properties of ion irradiated 308 ASSW. First of all, weld specimens were irradiated by 2 MeV proton to 1 and 10 dpa. Microstructure evolutions due to irradiation in δ-ferrite and austenite phases were characterized and micropillar compression tests were performed. In succession, dislocation density based stress-strain (S-S) relationships and quantification models of irradiation defects were adopted to define phases in finite element analyses. Resultant microscopic S-S curves were compared to verify material parameters. Finally, macroscopic behaviors were calculated by multiscale simulations using real microstructure based representative volume element (RVE). Validity of the approach was verified for the unirradiated specimens such that the estimated S-S curves and 0.2% offset yield strengths (YSs) which was 363.14 MPa were in 10% agreement with test. For irradiated specimens, the estimated YS were 917.41 MPa in 9% agreement.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.3
• /
• pp.47-57
• /
• 2010

Yield seismic coefficient plays an important role in the estimation of permanent displacement of a soil slope subjected to earthquake using Newmark's sliding block theory. However, yield seismic coefficients currently used in practices are not mechanically rigorous since most of them are estimated using limit equilibrium methods considering equilibrium condition only. Therefore, estimation of permanent displacement of a soil slope based on existing yield seismic coefficient may cause problems. Limit analysis estimating the range of mechanically rigorous solution is thought to be effective in evaluating the validity of existing yield seismic coefficient. In this study, a simple stability chart for yield seismic coefficient useful in practices is proposed by considering various slope conditions including stability number, slope inclination, strength parameters, etc.

• Korean Journal of Community Nutrition
• /
• v.12 no.6
• /
• pp.838-853
• /
• 2007

The aim of this study was to develop various types of a dish frequency questionnaire (DFQ) for estimating the habitual sodium intake and to evaluate the validity of a 125 item dish frequency questionnaire (DFQ 125) with the DFQ 70, DFQ 36 and DFQ 15. For the DFQ 125, one hundred and twenty five dish items were selected based on the information of sodium content of a one serving size, consumption frequency and dish items that contributed most to the variation of sodium intake. Frequency of consumption was determined through nine categories ranging from more than 3 times a day to almost never to indicate how often the specified amount of each food item was consumed during the past 6 months. The sodium intake estimated with DFQ 125 was $5775.0{\pm}3636.3mg$, 12.6% higher than that estimated with a 24 hr urine analysis ($5009.7{\pm}1541.9mg$) and significant correlation was observed between them (r=0.3315, p<0.001). When sodium content in broth leftover was subtracted from the total intake, the actual sodium intakes was decreased to $5309.6{\pm}3076.6mg$, which was 3.2% higher than that with a 24-hr urine analysis. Overall, 56% of subjects in the lowest quintile of sodium intake computed with DFQ 125 were also in the lowest of adjacent quintile while categorization into the opposite quintile were 4.9%. DFQ 70 was developed from DFQ 125 by omitting the food items not frequently consumed, selecting the dish items that showed higher sodium content per one portion size and higher consumption frequency. The sodium intake estimated with DFQ 70 ($5026.6{\pm}3107.1mg$) showed only 0.2% difference from that estimated with a 24-hr urine analysis, significant correlation with it (r=0.3199, p<0.001) and higher proportion of subjects to be classified into the same or adjacent quintile. The sodium intake estimated with DFQ 36 or DFQ 15 was also significancy correlated with that estimated with a 24-hr urine analysis (r=0.3441, p<0.001; r=0.321, p<0.001 respectively) and more. The proportion of subjects was classified into the same or adjacent quintile. However, the actual sodium intake estimated with DFQ 36 or DFQ 15 were $3534.0{\pm}1804.6mg\;and\;2508.0{\pm}1261.5mg$, respectively, 31.3% or 51.3% less than that estimated with a 24-hr urine analysis. It seems the DFQ 125 with subtraction of sodium content in broth leftover or DFQ 70 can be used quantitatively to estimate sodium intake of adults. DFQ 36 or DFQ 15 can be used as a screening tool or to assess the changes of sodium intake after nutrition education.

• Korean Journal of Community Nutrition
• /
• v.7 no.4
• /
• pp.484-494
• /
• 2002

This study was conducted to validate the semi-quantitative food frequency questionnaire that was developed to assess the intakes of fatty acids, as well as energy, carbohydrates, fat, protein, minerals and vitamins in Korean adults. The validity of the semi-quantitative food frequency questionnaire was tested on 78 subjects (31 men,47 women) aged 34 to 66 years. The semi-quantitative food frequency questionnaire included 93 food items and was validated on two 3-day dietary records. The mean intakes and the Spearman Correlation Coefficients between the semi-quantitative food frequency questionnaire and the two 3-day dietary records were analyzed for each nutrient and food group level. The mean nutrient intakes obtained from the semi-quantitative food frequency questionnaire were estimated to be greater than those of the two 3-day dietary records. The Spearman Correlation Coefficients between the energy-adjusted nutrient intakes from the semi-quantitative food frequency questionnaire and the two 3-day dietary records ranged from 0.24 for polyunsaturated fatty acids to 0.55 for fat in men and from 0.29 for polyunsaturated fatty acids to 0.55 for saturated fatty acids in women, respectively. The Spearman Correlation Coefficients for food intake ranged from 0.11 for teas and beverages to 0.58 for grains and their products in men,-0.04 for potatoes and starches to 0.73 for milk and dairy products in women. Foods consumed regularly had lower intra-person variation and tended to have higher observed correlation coefficients. These results indicate that the semi-quantitative food frequency questionnaire is a useful tool for estimating nutrient intakes, particularly of total fat and saturated fatty acid intakes.

• Environmental and Resource Economics Review
• /
• v.27 no.3
• /
• pp.495-520
• /
• 2018

Because of structural changes in the international oil market and the economy, it is widely recognized that the impact of oil shocks on the economy has weaken since the mid-1980s. This study tries to examine the validity of the recent perception about the relationship between oils shocks and the economy, estimating the time-varying effects of oil shocks on the Korean economy. The results show that the dynamic effects of oil shocks normalized to a one standard deviation has been relatively constant, in contrast to the recent perception and a number of existing studies. In addition, because the shape of impulse response functions at each point in time spanning from 1984:II to 2017:IV has not been changed significantly, it seems that the propagation mechanism of oil shocks also has not been substantially altered. These findings indicate that even though structural changes of the economy, such as the reduction in the share of oil consumption and the spread of high-efficiency energy technologies, have been rapidly progressed, it is not still enough to offset the negative effects of oil shocks. Rather, it seems that the recent perception about the shrinking effects of oil shocks is mainly due to the assumptions that do not reflect changes in the size of oil shocks. In particular, this problem appears more pronounced in the case of the typical a one standard deviation increase oil shock under homoskedasticity assumption, which is widely adopted in the most VAR analyses. Therefore, in estimating the effects of oil shocks on the economy, it is important to specify the correct model and normalization method, to reflect changes in the size of oil shocks.

• Korean Journal of Community Nutrition
• /
• v.23 no.6
• /
• pp.516-524
• /
• 2018

Objectives: This study assessed the accuracy of the 24-hour diet recall method for estimating the energy intake of elderly men using the doubly labeled water as a reference method. Methods: Seventeen subjects (mean age $72.5{\pm}3.9years$), who maintained the same body weight during the two weeks study period, were included in this study. Three 24-hour diet recalls (two weekdays and one weekend) were obtained over a 14 day period to estimate the mean energy intake. The total energy expenditure was measured over the same 14 days using the doubly labeled water method. The total energy intake and total energy expenditure were compared by paired t-test. Results: The total energy intake from the 24-hour diet recalls method was $2536.7{\pm}350.6kcal/day$, and the total energy expenditure from the doubly labeled water method was $2659.8{\pm}306.8kcal/day$. The total energy intake was slightly under-reported by $-123.2{\pm}260.8kcal/day$ (-4.4%). On the other hand, no significant difference was observed between the total energy intake and total energy expenditure of the subjects (p=0.069). The percentage of accurate predictions was 64.7%. The correlation between the total energy intake and total energy expenditure was statistically significant (r=0.697, p<0.005). Conclusions: The present study supports the use of the 24-hour diet recall method to estimate the mean energy intake in elderly men group. More studies are needed to assess the validity of 24-hour diet recall method in other population groups, including elderly women, adults and children.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.141-150
• /
• 2019

In the overseas plant construction market, the domain construction firms' construction capability has been greatly improved, but the capability of project management is evaluated to be insufficient compared to the technical aspect. Project management capabilities from the initial planning stage of project execution are regarded as the core competence of advanced construction companies. Among them, it is urgent to improve the capacity of conceptual estimate for domestic companies. In this study, the researchers surveyed and analyzed the methodology of estimating project cost in the planning phase of the plant project and developed an estimation method by conducting a case study analysis. Based on the logic of the cost index and parametric estimation method among the existing estimation methodology, the estimation tool was developed by deriving the input and output variables tailored to the plant project. The validity of the proposed methodology was evaluated by comparing the accuracy between the project estimate amount of the case project and the actual project amount. In order to increase the utilization of the developed conceptual estimate methodology,for plant construction project, it is necessary to systematize the data of the historical project data. Increasing the accuracy of future project cost estimates is directly related to increasing project award and profitability of the domestic construction company.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.2
• /
• pp.99-112
• /
• 2013

This paper presents a subspace system identification for estimating the stiffness matrix and flexural rigidities of a shear building. System matrices are estimated by LQ decomposition and singular value decomposition from an input-output Hankel matrix. The estimated system matrices are converted into a real coordinate through similarity transformation, and the stiffness matrix is estimated from the system matrices. The accuracy and the stability of an estimated stiffness matrix depend on the size of the associated Hankel matrix. The estimation error curve of the stiffness matrix is obtained with respect to the size of a Hankel matrix using a prior finite element model of a shear building. The sizes of the Hankel matrix, which are consistent with a target accuracy level, are chosen through this curve. Among these candidate sizes of the Hankel matrix, more proper one can be determined considering the computational cost of subspace identification. The stiffness matrix and flexural rigidities are estimated using the Hankel matrix with the candidate sizes. The validity of the proposed method is demonstrated through the numerical example of a five-story shear building model with and without damage.