• 전자공학회논문지S
• /
• 제35S권1호
• /
• pp.68-79
• /
• 1998

In this paper, we propose a model-based FDI(fault detetion and isolation) algorithm to detect and isolate fault in a linear system. The proposed algorithm is gased on an HFC(hydrid fault classifier) which consists of an FCART2(fault classifier by ART2 neural network) and an FCFM(fault classifier by fault models) which operate in parallel to isolate faults. The proposed algorithm is functionally composed of three main parts-parameter estimation, fault detection, and isolation. When a change in the system occurs, the estimated parameters go through a transition zone in which errors between the system output and the stimated output and the estimated output cross a predetermined thrseshold, and in this zone the estimated parameters are tranferred to the FCART2 for fault isolation. On the other hand, once a fault in the system is detected, the FCFM statistically isolates the fault by using the error between ach fault model out put and the system output. From the computer simulation resutls, it is verified that the proposed model-based FDI algorithm can be performed successfully to detect and isolate faults in a position control system of a DC motor.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.132-140
• /
• 1999

This paper treats the estimation of human impedance and their application to human-robot collaboration work. Initially, we perform an experiment at which the human becomes a slave and the robot behaves like a master having F/T sensor on its end. The human impedance expressed in terms of mass, damping, and stiffness properties are estimated based on the force data measured by F/T sensor and the commanded position data of the robot. To show the effectiveness of the estimated human impedance, we perform the second experiment at which the roles of the human and the robot are reversed. It is shown that the robot using the estimated human impedance follows the trajectory commanded by human very smoothly.

• 한국측량학회지
• /
• 제25권6_1호
• /
• pp.537-543
• /
• 2007

Since the GPS absolute positioning with pseudorange measurements can significantly be affected by the observation error, the time series analysis of the GPS receiver clock errors was performed in this study. From the estimated receiver clock errors, the time series model is generated, and constrained back in the absolute positioning process. One of the CORS (Continuously Operating Reference Stations) network is used to analyze the behavior of the receiver clock. The dominant part of the model is the linear trend during 24 hours, and the seasonal component is also estimated. After constraining the modeled receiver clock errors, the estimated position error compared to the published coordinates is improved from ${\pm}11.4\;m\;to\;{\pm}9.5\;m$ in 3D RMS.

• 제어로봇시스템학회논문지
• /
• 제3권3호
• /
• pp.244-251
• /
• 1997

In this paper, we propose a fault diagnosis algorithm to detect and isolate multiple faults in a system. The proposed fault diagnosis algorithm is based on a multiple fault classifier which consists of two ART2 NN(adaptive resonance theory2 neural network) modules and the algorithm is composed of three main parts - parameter estimation, fault detection and isolation. When a change in the system occurs, estimated parameters go through a transition zone in which residuals between the system output and the estimated output cross the threshold, and in this zone, estimated parameters are transferred to the multiple faults classifier for fault isolation. From the computer simulation results, it is verified that when the proposed diagnosis algorithm is performed successfully, it detects and isolates faults in the position control system of a DC motor.

• 로봇학회논문지
• /
• 제14권4호
• /
• pp.258-263
• /
• 2019

Some animals have special sensing functions in order to find foods, home and mates. Instead of passively sensing, they discharge signals and then extract necessary information from the response. More importantly, they utilize the gradients of the sensed signal in order to find the destination or objects. In this paper this special strategy is formulated mathematically, i.e., the perturbation and the correlation based gradient estimation is developed. A stereo sensor system using temperature sensors mounted on motors is developed for verification. The proposed method can estimate the gradient of the measured value accurately. Using this method, the direction in the maximum measured value can be estimated accurately, and the position of the heat source can be estimated from the intersection of the directions estimated from both sensors.

• 한국지능시스템학회논문지
• /
• 제11권6호
• /
• pp.516-523
• /
• 2001

진화프로그래밍과 슬라이딩 모드 관측기를 이용하여 SRM의 위치 속도를 추정하고 이를 속도제어에 적용하는것을 소개하고자 한다. 회전자 정보각의 검출은 일반적으로 엔코더나 레졸버를 사용하나, 이러한 기계적인 외부 위치 센서는 가격이 비싸므로 SRM 시스템의 설치 비용과 전체 드라이버 시스템의 크기가 증가하는 요인이된다. 따라서 산업현장에 적용하는 한계의 원인이 된다. 본 연구에서는 위치 및 속도센서를 제거한 슬라이딩 모드 관측기를 사용하여 SRM 드라이브에 적용되었다. 그러나 SRM의 제어에 있어 슬라이딩 모드 관측기의 파라메터들이 매우 민감하여 작은 변화에 대해서도 위치와 속도 추정결과에 많은 영향을 미친다. 제어이득을 일정하게 유지하고, 슬라이딩 모드 관축기의 파라케터들을 크게 변화시킬 경우, 관축기의 파라메터들은 관측기의 떨림 폭을 결정하므로, 위치와 속도의 추정값의 변화가 크게 발생하여 관측기의 떨림 현상이 나타난다. 본 연구에서는 이러한 슬라이딩모드 관측기의 파라메터들과 제어기의 이득들을 방향성 벡터를 갖는 진화 프로그래밍을 사용하여 최적의 파라메터들을 선정하고, 이를 제어시스템으로 구현하고자 한다.

• 대한치과교정학회지
• /
• 제30권3호
• /
• pp.307-315
• /
• 2000

교정치료의 진단 및 치료계획의 수립시 이용되는 측모두부방사선 사진을 이용하여 골격성 부정교합의 형태와 성별에 따른 두부위치의 재현성을 파악하고자 성인남녀 90명을 대상으로 자세변수 6항목을 설정하여 연구한 결과 다음과 같은 결과를 얻었다. 1. 자연두부위치의 재현성에 있어서 남,녀 각각의 자세변수는 통계학적인 유의성이 없었다 (P>0.05). 2. 자연두부위치의 재현성에 있어서 각 부정교합군과 전체 표본 각각의 자세변수는 통계학적인 유의성이 없었다(P>0.05). 3. method error를 이용한 자연두부위치의 재현성은 모든군에서 우수하였다. 결론적으로 자연두부위치의 재현성은 골격성 부정교합의 양상과 성별에 관계없이 우수하였는데, 이는 자연두부위치를 이용한 많은 연구에 도움이 될 뿐 아니라 교정적 문제와 관련된 기능과 형태의 관계를 파악하고자 할 때 그 가치를 높이는데 기여할 수 있으리라 생각된다.

• 한국의학물리학회지:의학물리
• /
• 제28권2호
• /
• pp.39-44
• /
• 2017

This study aims to analyze dose distribution and treatment time of endobronchial brachytherapy (EBBT) by changing the position step size of the dwell position. A solid water phantom and an intraluminal catheter were used in the treatment plan. The treatment plans were generated for 3, 5, 7, and 10 cm treatment lengths, respectively. For each treatment length, the source position step sizes were set as 2.5, 5, and 10 mm. Three reference points were set 1 cm away from the central axis of the catheter, along the axis, for uniform dose distribution. Volumetric dose distribution was calculated to evaluate the dosimetric effect. The total radiation delivery time and total dwell time were estimated for treatment efficiency, which were increased with position step sizes. At half-life time, the differences between the position step sizes in the total radiation delivery time were 18.1, 15.4, 18.0, and 24.0 s for 3, 5, 7, and 10 cm treatment lengths, respectively. The dose distributions were more homogenous by increasing the position step sizes. The dose difference of the reference point was less than 10%. In brachytherapy, this difference can be negligible. For EBBT, the treatment time is the key factor while considering the patient status. To reduce the total treatment time, EBBT can be performed with 2.5 mm position step size.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1264-1273
• /
• 2015

An inverter output power control based power factor correction (PFC) strategy is being extensively used for permanent magnet synchronous motor (PMSM) drives in appliances because such a strategy can considerably reduce the cost and size of the inverter. In this strategy, PFC circuits are removed and large electrolytic DC-link capacitors are replaced with small film capacitors. In this application, the PMSM d-q axes currents are controlled to produce ripples, the frequency of which is twice that of the AC main voltage, to obtain a high power factor at the AC mains. This process indicates that the PMSM operates under periodic magnetic saturation conditions. This paper proposes a back electromotive-force (back-EMF) estimator for the high-speed sensorless control of PMSM operating under periodic magnetic saturation conditions. The transfer function of the back-EMF estimator is analyzed to examine the effect of the periodic magnetic saturation on the accuracy of the estimated rotor position. A simple compensation method for the estimated position errors caused by the periodic magnetic saturation is also proposed in this paper. The effectiveness of the proposed method is experimentally verified with the use of a PMSM drive for a vacuum cleaner centrifugal fan, wherein the maximum operating speed reaches 30,000 rpm.

• 제어로봇시스템학회논문지
• /
• 제2권1호
• /
• pp.35-44
• /
• 1996

A design method for a teleoperator robot system is presented in this paper. The control system consists of two phases; approach phase and contact one. The end-effector position of the estimated slave robot and the contact force between the end-effector and wall are displayed on the monitors at control site, using which the operator controls the teleoperator system. The approach phase controller is designed using Smith's principle and the contact one designed based upon the structured singular value ${\mu}$ in order to increase the robustness of the system. The uncertainatices such as communication time delay and the variations of system parameters are considered as a muliplicative pertubation. Computer simulations are conducted in order to evaluate the performance of the proposed design method. It is found that desirable control performance, especially in the contact phase, is obtained if the control mode is switched into contact phase when the estimated position of the slave robot end-effector is in front of the wall.