• 전기학회논문지
• /
• 제64권11호
• /
• pp.1645-1650
• /
• 2015

This paper presents the 3-dimensional electromagnetic field analysis method and correction of sensor distortion that is used by a motor speed sensor. The magnetic sensors are being expanded due to lower price than the other speed sensors such as resolver and encoder. Magnetic sensor generates sine and cosine waves when the motor rotates. However, the sine and cosine signals are distorted due to magnetic noise, which makes the angle error of the sensor, generated near by the Hall element. This paper defines an optimal design variables by using the Taguchi method to minimize output distortion of the magnetic sensor and permanent magnet. To enhance reliability of the magnetic position sensor from sensitivity error, assembly amplitude mismatch and the electrical angle, 3-Dimensional electromagnetic finite element method and correction algorithm errors were performed in due of the magnetic sensor in order to improve the quality of the initial production model.

• 한국정밀공학회지
• /
• 제30권7호
• /
• pp.754-761
• /
• 2013

Thermal displacement is an important issue in machine tool systems. During the last several decades, thermal error compensation technology has significantly reduced thermal distortion error; this success has been attributed to the development of a precise, robust thermal error model. A major advantage of using the thermal error model is instant compensation for the control variables during the modeling process. However, successful application of thermal error modeling requires correct determination of the temperature sensor placement. In this paper, a procedure for predicting thermal-mode-based thermal error is introduced. Based on this thermal analysis, temperature sensors were positioned for multiple heat-source models. The performance of the sensors based on thermal-mode error analysis, was compared with conventional methods through simulation and experiments, for the case of a slide table in a transient state. Our results show that for predicting thermal error the proposed thermal model is more accurate than the conventional model.

• 한국지능시스템학회논문지
• /
• 제20권6호
• /
• pp.814-819
• /
• 2010

본 논문은 자율주행 장치(autonomous ground vehicle)를 위한 각속도의 오차 최소화에 관한 연구이다. 각속도의 오차 최소화는 자율주행 장치의 이동 거리를 측정하는 엔코더(encoder)와 관련하여 자율주행 장치의 가장 중요한 기반 기술인 위치측정(localization)과 밀접한 관련이 있다. 기존에 각속도의 오차 최소화 방법들에는 이동관성을 측정할 수 있는 가속계(accelerometer)와 회전관성을 측정할 수 있는 자이로(yaw gyro), 방위각을 측정할 수 있는 자계 센서인 전자나침판(electronic compass) 센서들을 확률을 통해 상호 보완하는 형태로 활발한 연구가 이루어지고 있다. 하지만 각속도 측정을 위해 사용되는 센서들은 수학적인 오차와 센서들의 자체 특성에 의해 누적 오차가 발생하게 되며, 여러 센서들을 이용하여 확률적인 오차 보정을 수행하여도 연산량과 비용이 증가되는 문제점을 가지게 된다. 따라서 본 논문에서는 자율주행 장치의 시스템 특성을 고려하여 엔코더와 자이로만을 이용한 각속도의 오차 최소화에 대한 연구를 수행하였다. 실험은 직접 설계 제작한 자율주행 장치를 이용하였으며, 자율주행 장치가 제어기를 통해 주행하는 동안에 엔코더, 자이로를 통해 계산된 각각의 각속도 결과들과 엔코더와 자이로만을 이용한 제안된 각속도 측정 방법의 결과를 비교하였다. 실험 결과, 엔코더 혹은 자이로만을 이용한 각속도 측정 방법들에 비해 제안한 각속도 측정 방법의 누적 오차가 크게 줄었음을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.258-263
• /
• 1991

Optimal configurations for redundant TDOF (Two Degree Of Freedom) sensor systems are proposed. The determinant of error covariance matrix is used as the performance index, and optimal configurations for 2 TDOF sensor system and 3 TDOF sensor system are evaluated by minimizing the index.

• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2191-2204
• /
• 1993

A sensor system has been developed to measure the posture(position and orientation) of mobile robots working in industrial environments. The proposed sensor system consists of a CCD camera, retro-reflective landmarks, a strobe unit and an image processing board. The proposed hardware system can be built in economic price compared to commercial vision systems. The system has the capability of measuring the posture of mobile robots within 60 msec when a 386 personal computer is used as the host computer. The experimental results demonstrated a remarkable performance of the proposed sensor system in the posture measurement of mobile robots - the average error in position is less than 3 mm and the average error in orientation is less than 1.5.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.252-255
• /
• 2003

In this paper, we suggest the method for a service robot to move safely from an initial position to n goal position in the wide environment like a building. There is a problem using odometry encoder sensor to estimate the position of n mobile robot in the wide environment like a building. Because of the phenomenon of wheel's slipping, a encoder sensor has the accumulated error of n sensor measurement as time. Therefore the error must be compensated with using other sensor. A vision sensor is used to compensate the position of a mobile robot as using the regularly attached light's panel on a building's ceiling. The method to create global path planning for a mobile robot model a building's map as a graph data type. Consequently, we can apply floyd's shortest path algorithm to find the path planning. The effectiveness of the method is verified through simulations and experiments.

• 센서학회지
• /
• 제3권2호
• /
• pp.24-32
• /
• 1994

힘 증강기법을 이용하여 10 MN 로드셀 3개로 30 MN 힘 센서를 설계 제작하였다. 로드셀은 스트레인 게이지방식으로서 기둥형 감지부로 설계되었으며 오차를 줄이기 위하여 온도보상회로등이 내장되어 있다. 특성실험 결과 제작된 힘 센서의 총오차는 0.1 %이내로 추정되어 4.5 MN 이상의 대용량 재료시험기의 교정 및 시험에 유용하게 사용될 것으로 기대된다.

• 제어로봇시스템학회논문지
• /
• 제19권4호
• /
• pp.357-363
• /
• 2013

Most serious patients who have the paralysis of their ankles can't use of their feet freely. But their ankles can be recovered by an ankle bending rehabilitation exercise and a ankle rotating rehabilitation exercise. Recently, the professional rehabilitation therapeutists are much less than stroke patients in number. Therefore, the ankle-rehabilitation robot should be developed. The developed robot can be dangerous because it can't measure the applied bending force and twisting moment of the patients' ankles. In this paper, the six-axis force/moment sensor for the ankle-rehabilitation robot was specially designed the weight of foot and the applied force to foot in rehabilitation exercise. As a test results, the interference error of the six-axis force/moment sensor was less than 2.51%. It is thought that the sensor can be used to measure the bending force and twisting moment of the patients' ankles in rehabilitation exercise.

• 자동차안전학회지
• /
• 제9권4호
• /
• pp.32-37
• /
• 2017

For automated vehicles, the integrity and fault tolerance of environment perception sensor have been an important issue. This paper presents radar, vision, lidar(laser radar) fusion-based fault detection algorithm for autonomous vehicles. In this paper, characteristics of each sensor are shown. And the error of states of moving targets estimated by each sensor is analyzed to present the method to detect fault of environment sensors by characteristic of this error. Each estimation of moving targets isperformed by EKF/IMM method. To guarantee the reliability of fault detection algorithm of environment sensor, various driving data in several types of road is analyzed.

• 제어로봇시스템학회논문지
• /
• 제19권11호
• /
• pp.1011-1016
• /
• 2013

Patients have the paralysis of their wrists, and can't use of their wrists freely. But their wrists can be recovered by wrist-bending rehabilitation exercise. Professional rehabilitation therapeutists exercise the wrists of patients in hospital. But the wrists of patients have not exercised enough for the rehabilitation, because the therapeutists are much less than patients in number. Therefore, the wrist rehabilitation robot should be developed, and it have to measure the applied force to the patients' wrists for their safety. In this paper, the four-axis force/moment sensor was designed for the wrist rehabilitation robot. As a test results, the interference error of the four-axis force/moment sensor was less than 0.91%. It is thought that the sensor can be used to measure the applied force to the patients' wrists.