• Journal of Biosystems Engineering
• /
• v.37 no.5
• /
• pp.327-334
• /
• 2012

Purpose: The color changes in red pepper during far infrared drying were studied in order to establish a color change model. Methods: The far infrared drying experiments of red pepper were conducted at two temperature levels of 60, $70^{\circ}C$ and two air velocity levels of 0.6 and 0.8 m/s. The results were compared with the hot-air drying method. The surface color changes parameters of red pepper were measured qualitatively based on L (lightness), a (redness), b (yellowness) and total color changes (${\Delta}E$). The goodness of fit of model was estimated using the coefficient of determination ($R^2$), the root mean square error (RMSE), the mean relative percent error (P) and the reduced chi-square (${\chi}^2$). Results: The results show that an increase in drying temperature and air velocity resulted in a decrease in drying time, the values of L (lightness) and a (redness) decreased with drying time during far infrared drying. The developed model showed higher $R^2$ values and lower RMSE, P and ${\chi}^2$ values. Conclusions: The model in this study could be beneficial to describe the color changes of red pepper by far infrared drying.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.8
• /
• pp.1041-1046
• /
• 2022

Nucleoside deoxyribosyltransferase (NDT) is an enzyme that replaces the purine or pyrimidine base of 2'-deoxyribonucleoside. This enzyme is generally used in the nucleotide salvage pathway in vivo and synthesizes many nucleoside analogs in vitro for various biotechnological purposes. Since NDT is known to exhibit relatively low reactivity toward nucleoside analogs such as 2'-fluoro-2'-deoxynucleoside, it is necessary to develop an enhanced NDT mutant enzyme suitable for nucleoside analogs. In this study, molecular evolution strategy via error-prone PCR was performed with ndt gene derived from Lactobacillus leichmannii as a template to obtain an engineered NDT with higher substrate specificity to 2FDU (2'-fluoro-2'-deoxyuridine). A mutant library of 214 ndt genes with different sequences was obtained and performed for the conversion of 2FDU to 2FDA (2'-fluoro-2'-deoxyadenosine). The E. coli containing a mutant NDT, named NDT^L59Q, showed 1.7-fold (at 40℃) and 4.4-fold (at 50℃) higher 2FDU-to-2FDA conversions compared to the NDT^WT, respectively. Subsequently, both NDT^WT and NDT^L59Q enzymes were over-expressed and purified using a His-tag system in E. coli. Characterization and enzyme kinetics revealed that the NDT^L59Q mutant enzyme containing a single point mutation of leucine to glutamine at the 59^th position exhibited superior thermal stability with enhanced substrate specificity to 2FDU.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.7
• /
• pp.743-747
• /
• 2001

New azomethine metal complexes were synthesized systematically and characterized. Beryllium, magnesium, or zinc ions were used as a central metal cation and aromatic azomethines (L1-L4) were employed as a chelating anionic ligand. Emission peaks o f the complexes in both solution and solid states were observed mostly at the region of 400-500 nm in the luminescence spectra, where blue light was emitted. Three of them (BeL1 (Ⅰ), ZnL2 (Ⅱ), and ZnL3 (Ⅲ)) were sublimable and thus were applied to the organic light-emitting devices (OLED) as an emitting layer, respectively. The device including the emitting layer of Ⅰ exhibited white emission with the broad luminescence spectral range. The device with the emitting layer of Ⅱ showed blue luminescence with the maximum emission peak at 460 nm. Their ionization potentials, electron affinities, and electrochemical band gaps were investigated with cyclic voltammetry. The electrochemical gaps of 2.98 for I, 2.70 for Ⅱ, and 2.63 eV for Ⅲ were found to be consistent with their respective optical band gaps of 3.01, 2.95 and 2.61 eV within an experimental error. The structure of OLED manufactured in this study reveals that these complexes can work as electron transporting materials as well.

• MALSORI
• /
• no.57
• /
• pp.43-58
• /
• 2006

This study aims to investigate whether Chinese learning Korean and Korean native speakers show any difference in length and formant structures of the Korean liquid 'ㄹ' in the environments of v_v and v_# through the acoustic analysis of 10 Chinese learners' and 10 Koreans' utterances. The acoustic analysis of L2KSC DB shows that the length and formant structures of 'ㄹ' produced by Chinese learners are significantly different from the ones by Koreans. I explain these differences by contrasting the liquids and syllable structure constraints of the two languages, Chinese and Korean. In addition, I relate the F1 and F2's values to the tongue's movement when making a constriction, and conclude that Chinese learners pronounce the 'ㄹ' in the v_# environment with the tongue lower and backer than Koreans do.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.443-448
• /
• 1998

With using artificial neural networks (ANNs), an analytical study related to the heated length effect on critical heat flux(CHF) has been carried out to make an improvement of the CHF prediction accuracy based on local condition correlations or table. It has been carried out to suggest a feasible criterion of the threshold length-to-diameter (L/D) value in which heated length could affect CHF. And within the criterion, a L/D correction factor has been developed through conventional regression. In order to validate the developed L/D correction factor, CHF experiment for various heated lengths have been carried out under low and intermediate pressure conditions. The developed threshold L/D correlation provides a new feasible criterion of L/D threshold value. The developed correction factor gives a reasonable accuracy fur the original database, showing the error of -2.18% for average and 27.75% for RMS, and promising results for new experimental data.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.833-839
• /
• 2013

In this study, an experiment was performed to monitor the two-dimensional shape of a cantilever composite structure using fiber Bragg grating (FBG) sensors. To monitor the shape of a composite structure, a deflection equation developed by NASA was applied and a composite beam attached to three FBG sensors was used. In the experiment, the shape of the composite beam was successfully estimated and an error was evaluated by comparing a real deflection. The error increased with real deflection; therefore, it was compensated by using the linear relationship between the error and the real deflection. After compensating the error, the measured deflection shows good agreement with the real deflection. Finally, the experiment shows that the FBG sensor and the deflection equation are suitable for monitoring the deflection curve of the beam structure with compensation of the error.

• English Language & Literature Teaching
• /
• v.12 no.3
• /
• pp.1-24
• /
• 2006

This study investigated differences in beliefs about English learning of 286 EFL college students and 52 English teachers in Korea. Data was collected using Horwitz's Beliefs About Language Learning Inventory and compared between students and teachers in beliefs. To address the research questions, the data were analyzed through descriptive statistics including frequencies, factor analysis, MANOVA, ANOVA, t-test, and reliability coefficients. The results showed four factors in student beliefs: Difficulty of learning English, nature of learning English, importance of correctness in learning English, and motivation and perceived importance of learning English. Clear differences were found in students and teachers' beliefs in English learning aptitude and importance of translation, error correction, and grammar rules. A few belief differences were also identified between Koreans and native-speaking English teachers related to the importance of vocabulary learning, pronunciation, and cultural knowledge. The findings of the study indicated that background variables such as gender and major field of study have an effect on student beliefs about L2 learning. The present study also provided pedagogical considerations to reduce mismatch between students and teachers beliefs and to improve the L2 planning and instruction.

• Communications for Statistical Applications and Methods
• /
• v.21 no.5
• /
• pp.435-444
• /
• 2014

The most widely used optimal bandwidth is known to minimize the mean integrated squared error(MISE) of a kernel density estimator from a true density. In this article proposes, we propose a bandwidth which asymptotically minimizes the mean integrated density power divergence(MIDPD) between a true density and a corresponding kernel density estimator. An approximated form of the mean integrated density power divergence is derived and a bandwidth is obtained as a product of minimization based on the approximated form. The resulting bandwidth resembles the optimal bandwidth by Parzen (1962), but it reflects the nature of a model density more than the existing optimal bandwidths. We have one more choice of an optimal bandwidth with a firm theoretical background; in addition, an empirical study we show that the bandwidth from the mean integrated density power divergence can produce a density estimator fitting a sample better than the bandwidth from the mean integrated squared error.

• Spatial Information Research
• /
• v.18 no.4
• /
• pp.43-53
• /
• 2010

A dam is effective in stable supply of water required in daily life and reduction of damage from floods. hut a lot of land or houses arc submerged due to the construction of a darn heavily affecting environment in surrounding areas. In order to improve and support daily life environment. surrounding a dam, many projects have been conducted. and the study has focused on analyzing bow to calculate error characteristics of scale effect for submerged area by using GIS spatial overlay. First, as a result of areal error in submerged area by scale based on a 1/3,000 digital topographic map, it was found that the 1/5,000 digital topographic map is 9.5 times, 9.0 times and 10.5 times more accurate than the 1/25,000 digital topographic map, respectively, in the total of areal error, standard error and areal error for submerged area. Second, as a result of analysis on areal error in areas surrounding a dam, it has been found that Jinan-eup in Jinan-gun registered the largest difference in area within 2km and 2~5km catchment area by recording 13.8 times and 20.6 times, respectively, in the 1/5,000 digital topographic map compared to the 1/25,000 digital topographic map. In addition, in areas out of catchment area within 2km, the area of occupation was very small, so there were no characteristics in error. The out of catchment area, Nami-myeon in Geumsan-gun recorded the largest errors of 31.8 times. Finally, it was found that the ratio of the total areal error in area surrounding a dam, standard error and the total areal error in the entire area using 1,5000 digital topographic map is 7.4 times, 11.8 times and 7.4 times more accurate than the 1/25,000 digital topographic map.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.5
• /
• pp.326-332
• /
• 2012

In this paper, error analyses on the calculation of offshore wind speed have been conducted using HeMOSU-1 data to develop offshore wind energy in Yeonggwang sea of Korea and onshore observed wind data in Buan, Gochang and Yeonggwang for 2011. Offshore wind speed data at 98.69 m height above M.S.L is estimated using relational expression induced by linear regression analysis between onshore and offshore wind data. In addition, estimated offshore wind speed data is set at 87.65 m above M.S.L using power law wind profile model with power law exponent(0.115) and its results are compared with the observed data. As a result, the spatial adjustment error are 1.6~2.2 m/s and the altitude adjustment error is approximately 0.1 m/s. This study shows that the altitude adjustment error is about 5% of the spatial adjustment error. Thus, long term observed data are needed when offshore wind speed was estimated by onshore wind speed data. because the conversion of onshore wind data lead to large error.