• KIISE Transactions on Computing Practices
• /
• v.23 no.4
• /
• pp.210-216
• /
• 2017

In the paper we propose and implement a new indoor localization system where the techniques of magnetic field based fingerprinting and pedestrian dead reckoning are combined. First, we determine a target's location by comparing acquired magnetic field values with a magnetic field map containing pre-collected field values at different locations and choosing the location having the closest value. As the target moves, we use pedestrian dead reckoning to estimate the expected moving path, reducing the maximum positioning error of the initial location. The system eliminates the problem of localization error accumulation in pedestrian dead reckoning with the help of the fingerprinting and does not require Wi-Fi AP infrastructure, enabling cost-effective localization solution.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1291-1298
• /
• 2023

Surveillance reconnaissance sensor network is used for surveillance in wartime and area of operation. In this paper, we propose a target localization method using the detection signal strength of seismic sensors. Relay equipment calculates the target location using coordinate information and detection signal strength of the seismic sensors. Target localization error deviation due to environmental factors was minimized by subtracting the dynamic offset when calculating the target location. Field test shows improvement of target localization through reduction of errors. The average error was decreased to 3.62m. Up to 62% improved result was obtained compared to weighted centroid localization method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.575-582
• /
• 2009

The localization algorithm(LAtu) using the IDentification Code($C_{ID}$) is suggested in RSS(Received Signal Strength) based Wireless Sensor Network(WSN), and the localization system using the suggested algorithm is designed and implemented in this paper. In addition to this, the performance of ranging correction quality and localization error of the localization system(System(LAtu)) that is developed using the LAtu is analyzed and compared with that of the localization system(System(LAieee)) using the channel model of IEEE 802.15.4 standard(LAieee) by the actual experimentation. From the experimentation, the ranging correction quality is analyzed that the LAtu is highly better than the channel model of LAieee about 34% under the distance between the moving module and the beacon module($D_{MM-BM}$) is 2m, and is also a few better than that of the LAieee about average 5% under the $D_{MM-BM}$ is above 5m. The localization error quality of the System(LAtu) is lower than that of the System(LAieee)) about 1cm under the lecture room and 4cm in the large lecture room.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.5
• /
• pp.415-419
• /
• 2010

A variety of methods for sound source localization have been developed and applied to several applications such as noise detection system, surveillance system, teleconference system, robot auditory system and so on. In the previous work, we proposed the sound source localization using the spatially mapped GCC functions based on TDOA for robot auditory system. Performance of the proposed one for the noise effect and estimation resolution was verified with the real environmental experiment under the single source assumption. However, since multi-talker case is general in human-robot interaction, multiple source localization approaches are necessary. In this paper, the proposed localization method under the single source assumption is modified to be suitable for multiple source localization. When there are two sources which are correlated, the spatially mapped GCC function for localization has three peaks at the real source locations and imaginary source location. However if two sources are uncorrelated, that has only two peaks at the real source positions. Using these characteristics, we modify the proposed localization method for the multiple source cases. Experiments with human speeches in the real environment are carried out to evaluate the performance of the proposed method for multiple source localization. In the experiments, mean value of estimation error is about $1.4^{\circ}$ and percentage of multiple source localization is about 62% on average.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1768-1769
• /
• 2011

The nonlinear estimation and the pseudo-linear estimation are used to treat the target localization in sensor network which provides range difference of arrival (RDOA) measurements. It is known that the nonlinear estimation has sensitive problem for the initial estimate and the pseudo-linear estimation has a large estimation error. The QCLS method is the typical estimator of the methods for pseudo-linear estimation. However the estimate by using the QCLS method includes the estimation error because the first stage of two estimation processes of the QCLS method causes the biased estimation error. Therefore we propose a instrumental variables(IV) method for minimizing the estimation error of the first stage. The simulation shows that the performance of the proposed method is superior to the QCLS method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.221-228
• /
• 2020

A sonobuoy is dropped onto the surface of water to estimate the bearing of an underwater target. A Directional Frequency Analysis and Recording (DIFAR) sonobuoy has an error in the specific angular section due to the method of estimating bearing and noise, which causes an error in target localization using multiple sonobuoys. In addition, the position of the sonobuoy continues to move, but since a sonobuoy with a GPS is intermittently arranged, it is difficult to estimate the exact position of the sonobuoy. This also causes target localization performance degradation. In this paper, we propose a technique to improve the target localization performance by compensating for bearing errors using characteristics of the DIFAR sonobuoy and multiple-sonobuoy position errors based on the intermittently arranged active sonobuoy with a GPS.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.159-162
• /
• 2002

This paper presents a modified localization scheme of a mobile robot. When it navigates, the position error of a robot is increased and doesn't go to a goal point where the robot intends to go at the beginning. The objective of localization is to estimate the position of a robot precisely. Many algorithms were developed and still are being researched for localization of a mobile robot at present. Among them, a localization algorithm named continuous localization proposed by Schultz has some merits on real-time navigation and is easy to be implemented compared to other localization schemes. Continuous Localization (CL) is based on map-matching algorithm with global and local maps using only ultrasonic sensors for making grid maps. However, CL has some problems in the process of searching the best-scored-map, when it is applied to a mobile robot. We here propose fast and powerful map-matching algorithm for localization of a mobile robot by experiments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.8
• /
• pp.2627-2647
• /
• 2022

The easy scalability and low cost of range-free localization algorithms have led to their wide attention and application in node localization of wireless sensor networks. However, the existing range-free localization algorithms still have problems, such as large cumulative errors and poor localization performance. To solve these problems, an incremental strategy-based residual regression network is proposed for node localization in wireless sensor networks. The algorithm predicts the coordinates of the nodes to be solved by building a deep learning model and fine-tunes the prediction results by regression based on the intersection of the communication range between the predicted and real coordinates and the loss function, which improves the localization performance of the algorithm. Moreover, a correction scheme is proposed to correct the augmented data in the incremental strategy, which reduces the cumulative error generated during the algorithm localization. The analysis through simulation experiments demonstrates that our proposed algorithm has strong robustness and has obvious advantages in localization performance compared with other algorithms.

• Journal of Engineering Education Research
• /
• v.19 no.6
• /
• pp.49-56
• /
• 2016

The Human Robot Interface (HRI) based on 3D depth sensor on the docent robot is developed and the localization algorithm based on extended Kalman Filter (EKFLA) are proposed through the capstone design by graduate students in this paper. In addition to this, the performance of the proposed EKFLA is also analyzed. The developed HRI system consists of the route generation and localization algorithm, the user behavior pattern awareness algorithm, the map data generation and building algorithm, the obstacle detection and avoidance algorithm on the robot control modules that control the entire behaviors of the robot. It is confirmed that the improvement ratio of the localization error in EKFLA on the scenarios 1-3 is increased compared with the localization algorithm based on Kalman Filter (KFLA) as 21.96%, 25.81% and 15.03%, respectively.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.2 s.21
• /
• pp.49-57
• /
• 2005

The target localization using the line arrays buried in the seabed is a difficult problem due to the complex sea bottom characteristics and need to compensate the wave propagation effect to localize the target accurately Sound speed mismatch in the seabed causes a bias in the target bearing estimation and induces the localization error. In this paper we describe a target localization method with improved accuracy of target bearing and localization by calibration the sound speed in the seabed. The proposed algorithm is verified through the ocean data.