• 전자공학회논문지 IE
• /
• v.43 no.3
• /
• pp.6-12
• /
• 2006

This paper described an 8bit, 100Msample/s CMOS D/A converter using a glitch-time minimization technique for the high-speed sampling rate of 100MHz level. The proposed DAC was implemented in $0.35{\mu}m$ Hynix CMOS technology and adopts a current mode architecture to optimize sampling rate, resolution, chip area. The DAC linear characteristics was similar to the proposed specification and the prototype error between DNL and INL is less than $\pm$0.09LSB respectively. Also, the manufactured DAC chip was analyzed the cause of error operation and proposed the field considerations for chip test.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.64-69
• /
• 1998

The chlorophyll-a concentration measured by OCTS could be used for observing the physical phenomena such as eddies, fronts, and up welling in the oceans as well as for studying the ecology of phytoplankton. In this study, biological and physical features in the East Sea/Japan Sea (the East Sea) and the Yellow Sea observed by OCTS are analyzed in comparison with other satellite data. And in situ chlorophyll data were compared with OCTS Level 2 chlorophyll data. There was a striking correspondence between the satellite chlorophyll structure and other satellite data in the East Sea in the spring. Very complicated ring structures in the 557 are reflected in chlorophyll structure. In the Yellow Sea, the surface structure was rather simple. While the discrepancies between in situ and OCTS algorithm version 3 chlorophyll were small in the East Sea, those for the Yellow Sea were rather big. Comparison with CZCS data for similar time of the year (May-June) shows that OCTS chlorophyll is higher in general. Although the error is partly due to the fact that NASDA chlorophyll algorithm is an empirical algorithm for case 1 water, how much of this error is also due to the errors in sensor calibration or in atmospheric correction is not clear.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.5 s.98
• /
• pp.604-611
• /
• 2005

The relationship between floor impact sound and vibration has been studied by field measurements, and the vibration modal characteristics have been analyzed. Vibration levels impacted by a standard heavy-weight impact source have been predicted according to the main design parameters using finite element method. Experimental results show that the dominant frequencies of the heavy impact sounds range below 100 Hz and that they are coincident with natural frequencies of the concrete slab. In addition, simple 2-dimensional finite element models are proposed to substitute 2 types of 3-dimensional models of complicated floor structural slabs those by The analytical result shows that the natural frequencies from first to fifth mode well correspond to those by experiments with an error of less than $12\%$, and acceleration peak value iscoincident with an error of less than $2\%$. Using the finite element model. vibration levels areestimated according to the design Parameters, slab thickness, compressive strength, and as a result, the thickness is revealed as effective to increase natural frequencies by $20\~30\%$ and to reduce the vibration level by 3$\~$4 dB per 30 mm of extra thickness.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.5
• /
• pp.163-171
• /
• 2001

Reaeration phenomena, the physical process of absorption of oxygen from atmosphere, is one of the important parameters of dissolved oxygen simulation in streams. This study was aimed at predicting reaeration coefficients in rural small streams, examining the influence of drop structure on reaeration and the seasonal fluctuation of reaeration coefficients. Reaeration coefficients of five streams including four tributaries of Bokha watershed in Gyeonggi Ichon and Onyang stream in Chungnam Onyang were measured. Constant rate injection (CRI) method using propane and Rhodamine-WT as gas and dye tracer was adopted. Reaeration coefficients ranged between 6.16 and 29.16 reciprocal day, higher than those in USGS database. Prediction equation,$k_2=CV^{0.593}$, was regressed from the measured data at 95% confidence level, with an absolute error of 21.2% and a standard error of 4.0 reciprocal days. Reaeration coefficients of experimental reaches with drop structure showed percentile increases of 42.3 to 159.2 compared to those without it, an indication that drop structure plays an important role on stream reaeration. Taking into consideration the seasonal fluctuation of reaeration coefficients, the values measured during September and October were the highest, mainly due to the removal of aquatic plants. by intensive rainfall during summer.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2397-2404
• /
• 2012

Underwater acoustic communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes signal distortion and error floor. In order to improve the performance, it is necessary to employ an iterative coding scheme. Among the iterative coding scheme, turbo codes and LDPC codes are dominant channel coding schemes in recent. This paper concluded that turbo coding scheme is optimal for underwater communications system in aspect to performance, coded word length, and equalizer combining. Also, decision directed phase recovery was used for correcting phase offset induced by multipath. Based on these algorithms, we confirmed the performance in the environment of oceanic experimentation.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.2
• /
• pp.115-125
• /
• 2011

An accurate estimation of software development size is an important factor in calculating reasonable cost of project development and determining its success. In this study, we propose estimation models, using function point based on the functional correlation between software, with empirical data. Three models($FP_{est}(I)$, $FP_{est}(II)$, $FP_{est}(III)$) are developed with correlation and regression analysis. The validity of the models is evaluated by the significance test by comparing values of Mean Magnitude of Relative Error (MMRE) and predictions of each model at level n%. Model $FP_{est}(III)$ proved to be superior to other models such as IFPC(Indicative Function Point Count), EFPC(Estimated Function Point Count), EPFS(Early Prediction of Function Size), $FP_{est}(I)$, and $FP_{est}(II)$. As a result, the accuracy of the model appears to be very high to determine the usefulness of the model to finally overcome weakness of other estimation models. The model can be efficiently used to estimate project development size including software size or manpower allocation.

• Journal of Broadcast Engineering
• /
• v.22 no.1
• /
• pp.42-50
• /
• 2017

A Bit-depth expansion is a method to increase the number of bit. It is getting important as the needs of HDR (High Dynamic Range) display or resolution of display have been increased because the level of luminance or expressiveness of color is proportional to the number of bit in the display. In this paper, we present effective bit-depth expansion algorithm for conventional standard 8 bit-depth content to display in high bit-depth device (10 bits). Proposed method shows better result comparing with recently developed methods in quantitative (PSNR) with low complexity. The proposed method shows 1db higher in PSNR measurement with 40 times faster in computational time.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.1
• /
• pp.42-47
• /
• 1999

This paper presents the information transmission between on-board and ground-site in MAGLEV. considering safety and high speed operation and density operation, information transmission between them is necessary. Therefore it is necessary for transmission system to ensure high speed transmission, low error rate, massive information, and reliability of information. To provide above conditions, 1.1km signal line assembly was constructed and Frequency Shift Keying(FSK) modulation and Open System Interconnection(OSI) based high-level data link control(HDLC) protocol are applied. To modulate digital signal for transmission from ground-site to on-board, carrier frequency of 70kHz is used and 90khz is used for transmission from on-board to ground-site. Transmission speed is 2400bps for consideration of train speed, quantity of information, and data error rate. And this paper introduces information monitoring considering user interface and presents the method for an effective data transmission in MAGLEV which is now being tested and intends to provide for an intelligent train operation system in future.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1154-1164
• /
• 2015

This paper proposes a fully sensorless driver for a permanent magnet synchronous motor (PMSM) integrated with a digital motor controller and an analog pre-driver, including sensing circuits and estimators. In the motor controller, a position estimator estimates the back electromotive force and rotor position using a sliding-mode observer. In the pre-driver, drivers for the power devices are designed with a level shifter and isolation technique. In addition, a current sensing circuit measures a three-phase current. All of these circuits are integrated in a single chip such that the driver achieves control of the speed with high accuracy. Using an IC fabricated using a $0.18{\mu}m$ BCDMOS process, the performance was verified experimentally. The driver showed stable operation in spite of the variation in speed and load, a similar efficiency near 1% compared to a commercial driver, a low speed error of about 0.1%, and therefore good performance for the PMSM drive.

• Industrial Engineering and Management Systems
• /
• v.8 no.1
• /
• pp.37-46
• /
• 2009

Patient safety has become a growing concern in health care. The U.S. Institute of Medicine (IOM) report "To Err Is Human: Building a Safer Health System" in 1999 included estimations that medical error is the eighth leading cause of death in the United States and results in up to 100,000 deaths annually. However, many adverse events and errors occur in surgical practice. Within all kinds of surgical adverse events, wrong-side/wrong-site, wrong-procedure, and wrong-patient adverse events are the most devastating, unacceptable, and often result in litigation. Much literature claims that systems must be put in place to render it essentially impossible or at least extremely difficult for human error to cause harm to patients. Hence, this research aims to develop a prototype system based on active RFID that detects and prevents errors in the OR. To fully comprehend the operating room (OR) process, multiple rounds of on site discussions were conducted. IDEF0 models were subsequently constructed for identifying the opportunity of improvement and performing before-after analysis. Based on the analysis, the architecture of the proposed RFID-based OR system was developed. An on-site survey conducted subsequently for better understanding the hardware requirement will then be illustrated. Finally, an RFID-enhanced system based on both the proposed architecture and test results was developed for gaining better control and improving the safety level of the surgical operations.