• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.42-50
• /
• 2016

Recently, researches about the communication between LED array and the camera (alias 'Visual-MIMO'), have been actively conducted, and the application to the vehicle and a smart phone is expected to be maximized. Since the bit error may occur if the ISI is severe in a LED array, it is necessary to switch from the multiplexing to the diversity mode. In this paper, according to the use or not of a reference array pattern, a method for determining the transition time to the diversity mode is suggested and verified. When using the reference pattern, it determines the transition time to the diversity mode from the multiplexing using the brightness information of the received image. If the reference array pattern is not used, the size of LED array compared to the entire image according to the distance is used and the size of the LED array at the distance of a severe ISI may be used for the determination of transition time to the diversity. Finally, the proposed method is verified through the simulation and hardware experiments as well as by analyzing the performance in accordance with the ISI level and the distance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3A
• /
• pp.235-243
• /
• 2009

In this paper, we investigate the cognitive and cooperative communication scheme to improve the spectral efficiency in multiuser OFDMA systems using wireless relays. First, we propose the frame structure in which the efficient frequency reuse scheme with the cognitive technique is performed to increase the system throughput. And in the case where the THP (Tomlinson-Harashima preceding) is used for the elimination of interference from the relay, we derive the effective signal to noise ratio of the link largely affected by the channel quantization error. From the system level simulation results, it is shown that the proposed cognitive and cooperative communication scheme increases the overall system performance including the feedback overhead.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.1-8
• /
• 2007

In this paper, we have derived the Noise-Equation to determine the level of cross-modulation noise that is required for designing multi-band CDMA handset from IS-98 standard. From this Noise-Equation, also we were able to determine each component's specification and forecast the performance(or margin) of designing handset. In conclusion, we have designed and implemented the multi-band CDMA handset of Qualcomm's Zero-IF structure and verified validity of the Noise-Equation. In result, we have got the result of ${\pm}0.5dB$ error between Noise-Equation and actual measurement. Therefore, this paper will give a guideline for design of the Multi-Band CDMA handset.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.2
• /
• pp.162-169
• /
• 2011

The flight control system utilize RSS(Relaxed Static Stability) criteria in both longitudinal axes to achieve performance enhancements and improve stability. The aircraft using digital flight-by-wire flight control system receives aircraft flight conditions such as pitch, roll and yaw rate, normal acceleration from RSA(Rate Sensor Assembly) and ASA(Acceleration Sensor Assembly). These sensors has permissible measurement error related to system safety of an aircraft but, unexpected flight motions are happened by sensing errors such as offset, noise and etc. The unexpected pitch down tendency occurred by ASA sensor bias in 1g level flight with pilot hands-off. This paper addresses the design and verification of flight control law to improve of pitch down or up tendency caused by ASA sensor bias. The result of analysis and flight test reveals that pitch down tendency can be improved by pitch attitude feedback system.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.2
• /
• pp.135-142
• /
• 2010

To obtain the input data for the design and long-term performance assessment of a high-level waste repository, the thermal conductivities of several granite rocks which were taken from the rock cores from the declined borehole were measured. The thermal conductivities of granite were measured under the different conditions of water content to investigate the effects of the water content on the thermal conductivity. A simple empirical correlation was proposed to predict the thermal conductivity of granite as a function of effective porosity and water content which can be measured with relative ease while neglecting the possible effects of mineralogy, structure and anisotropy. The correlation could predict the thermal conductivity of granite with the effective porosity below 2.7% from the KURT site with an estimated error below 10%.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.3
• /
• pp.84-92
• /
• 2002

A size of low-voltage conductor cables is determined by the voltage drop of a system the cable impedance and the cable ampacity based on temperature correction factor in accordance with the condition of cable installation. Therefore, the proper temperation correction factor according to the condition of cable installation should be applied to determining the cable ampacity and also the skin effect and proximity effect, along with the kind and size of conductor and the condition of cable installation, should be properly considered to analyze the proper value of resistance and the reactance of the conductors. This paper addresses the systematic design flow for determining the size of low voltage level con여ctor cables in calculating the voltage drop of a power system and proposes a new improved the calculating formula what error should be minimized in comparison with the general formula and which can be applied in design work for determining the size of conductor cables.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2021-2026
• /
• 2016

In this paper, a system model for transmission of 3-dimensional (3-D) signals is presented and its performance is analyzed. Unlike 2-D signals, no quadrature form expression for the 3-D signals is available. Exploiting a set of orthogonal basis functions, the 3-D signals are transmitted. As a result of computer simulation using very higher-level signal constellations, the 3-D transmission system has significantly improved error performance as compared with the 2-D system. It is considered that the principal reason for such performance improvement is much increased minimum Euclidean distance (MED) of the 3-D lattice constellations compared with the corresponding 2-D ones. When the MEDs of 2-D and 3-D lattice constellation are compared to confirm the analysis, the MED of 3-D 1024-ary constellation is around 2.6 times larger than that of the quadrature amplitude modulation (QAM). Expanding the constellation size to 4096, the MED of 3-D lattice constellation is increased by 3.2 times of the QAM.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.303-309
• /
• 2010

We proposes a new approach for testing the self visual-acuity by using the KS standard optotype. The proposed system provides their hand-gesture recognition method for the convenient response of subjects in the visual acuity measurement. Also, this system can measure a visual-acuity that excludes the examiner's subjective judgement or the subject's memorized guess, because of presenting a random optotype automatically by computer without a examiner. Especially, Our system guarantees the reliability by using the KS standard optotype and its presentation(KS P ISO 8596), which is defined by the Korea Standards Association in 2006. And the database management function of our system can provide the visual-acuity data to the EMR client easily. As a result, Our system shows the 98% consistency in the limit of the ${\pm}1$ visual-acuity level error by comparing the visual-acuity chart test.

• Education of Primary School Mathematics
• /
• v.19 no.1
• /
• pp.31-45
• /
• 2016

In this study, the case of error became the object of learning, and the investigator applied these cases to an actual class and established three study problems in order to achieve the purpose of this study. The results of analysis of students' errors in figure based on before achievement test are shown as follows: First, the most errors occurred in the figure was the ones from deficient mastery of prerequisite concepts and definitions. Specially, the errors from deficient mastery of prerequisite concepts and definitions have the majority. it is very high ratio even if it considers an influence of an evaluation question item. so, I think it is necessary to teach concept related figure above all. Second, as the results of application 'finding errors' to a class, there is a meaningful difference in the mathematical achievement and reasoning ability within significance level 5%. This means 'finding errors' is one of the teaching method that it develops the mathematical achievement and reasoning ability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.8
• /
• pp.4092-4104
• /
• 2017

In this paper, an efficient 4K and 8K UHD(Ultra High Definition) transmission scheme is proposed on the convergence networks with broadcasting and LTE(Long Term Evolution) by using CoMP(Coordinated Multi-Point). A video data is compressed and divided into BL(Base Layer), E(Enhanced layer)1, E2 and E3 by scalable HEVC(High Efficiency Video Coding). The divided layers can be combined by the scalable HEVC such as mobile HD, full HD, 4K and 8K UHD(Ultra High Definition). The divided layers are transmitted through the convergence networks with DVB-T2(Digital Video Broadcasting-$2^{nd}$ Generation Terrestrial) broadcasting system and LTE CoMP. This scheme transmits mobile HD and full HD layers through DVB-T2 broadcasting system by using M-PLP(Multiple-physical Layer Pipes), and adaptively transmits 4K or 8K UHD layer through LTE CoMP with MMT(MPEG Media Transport) server. An adaptive transmitting and receiving scheme in the LTE CoMP system provides 4K or 8K UHD layer to a user according to the user status. The proposed scheme is verified by showing the system-level simulation results which is better BER(bit-error-rate) performance than the conventional scheme. The results show that the proposed scheme provides the stable video contents to the user especially at the cell edge.