• Journal of Environmental Science International
• /
• v.8 no.4
• /
• pp.419-422
• /
• 1999

A new method is developed to measure rainfall with high accuracy and resolution. The principle of new method is to detect a weight change of a buoyant weight according to a change in water level of raingage measured by the use of a strain-gage load cell. Field test of the method was carried out on 30 September 1998, when there was heavy rainfall with total amount of 189.60mm. The results are as follows; 1) In spite of heavy rainfall, this new method showed the total error of only 1.5% against the total amount of 189.60mm. 2) This new mechanism accomplished high accuracy and resolution at filed test in heavy rainy day. 3) The present study provided a possibility to develop a new raingage with an 0.01mm in rainfall measurement.

• Journal of Environmental Science International
• /
• v.17 no.11
• /
• pp.1211-1220
• /
• 2008

In this study, we estimated, the equivalent roughness using an estimation model, which considered grain distribution on the bed and the protrusion height of the grains. We also reviewed the appropriateness of the estimated equivalent roughness at the Goksung and Gurey station in the Seomjin River. To review the appropriateness of this model, we presented the water level-discharge relation curve applying the equivalent roughness to the flow model and compared and reviewed it to observed data. Also, we compared and reviewed the observed data by estimating the Manning coefficient n, the Chezy coefficient C, and the Darcy-Weisbach friction coefficient f by the equivalent roughness. The calculation results of the RMSE showed within 5% error range in comparison with observed value. Therefore the estimated equivalent roughness values by the model could be proved appropriate.

• Journal of Korea Multimedia Society
• /
• v.20 no.3
• /
• pp.446-455
• /
• 2017

A color image compression based on saliency map was proposed. The proposed method provides higher quality in saliency blocks on which people's attention focuses, compared with non-saliency blocks on which the attention less focuses at a given bitrate. The proposed method uses 3 different quantization tables according to each block's saliency level. In the experiment using 6 typical images, we compared the proposed method with JPEG and other conventional methods. As the result, it showed that the proposed method (Qup=0.5*Qx) is about 3.1 to 1.2 dB better than JPEG and others in saliency blocks in PSNR at the almost similar bitrate. In the comparison of result images, the proposed one also showed less error than others in saliency blocks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.7
• /
• pp.1126-1132
• /
• 2002

In this paper, we propose a new scheme of motion tracking based on fuzzy inference (Fl) and wavelet transform (WT) from image sequences. First, we present a WT to segment a feature extraction of dynamic image . The coefficient matrix for 2-level DWT tent to be clustered around the location of Important features in the images, such as edge discontinuities, peaks, and corners. But these features are time varying owing to the environment conditions. Second, to reduce the spatio-temperal error, We develop a fuzzy inference algorithm. Some experiments are performed 0 testify the validity and applicability of the proposed system As a result, proposed method is relatively simple compared with the traditional space domain method. It is also well suited for motion tracking under the conditions of variation of illumination.

• Journal of information and communication convergence engineering
• /
• v.9 no.5
• /
• pp.510-514
• /
• 2011

To detect the insulator in the fault state on the electric poles, we first measured radiation sounds from normal state insulators and error state insulators in the anechoic chamber. We processed the signals in frequency domain to find the features with filter bank, narrow band and wide band analysis. So we could found two apparent results from their frequency spectrums - one was 120Hz harmonic components, the other was high average noise level than normal state ones. Then we also introduced a technique for the direction detection of the fault state insulator using the cross correlation from the three dimensional array microphones. To eliminate the noise signal from unexpected directions, we suggested the zero padding technique in cross correlation function. From these, we could conclude that acoustic fault detection techniques are useful of the detection of insulators' faults and the estimation of the direction of the fault state insulators.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.349-354
• /
• 2002

A size of low-voltage conductor cables is determined by the voltage drop of a system, the cable impedance and the cable ampacity based on temperature correction factor in accordance with the condition of cable installation. Therefore, the proper temperature correction factor according to the condition of cable installation should be applied to determining the cable ampacity and also the skin effect and proximity effect, along with the kind and size of conductor and the condition of cable installation, should be properly considered to analyze the proper value of resistance and the reactance of the conductors. This paper addresses the systematic design flow for determining the size of low voltage level conductor cables in calculating the temperature character where error should be minimized in comparison with the general formula and which can be applied in design work for determining the size of conductor cables.

• MALSORI
• /
• no.44
• /
• pp.105-113
• /
• 2002

In Korean, each digit is monosyllable and some pairs are known to have high confusability, causing performance degradation of connected digit recognition systems. To improve the performance, in this paper, we employ various discriminant analyses (DA) including Linear DA (LDA), Weighted Pairwise Scatter LDA WPS-LDA), Heteroscedastic Discriminant Analysis (HDA), and Maximum Likelihood Linear Transformation (MLLT). We also examine several combinations of various DA for additional performance improvement. Experimental results show that applying any DA mentioned above improves the string accuracy, but the amount of improvement of each DA method varies according to the model complexity or number of mixtures per state. Especially, more than 20% of string error reduction is achieved by applying MLLT after WPS-LDA, compared with the baseline system, when class level of DA is defined as a tied state and 1 mixture per state is used.

• Journal of Korean Society for Quality Management
• /
• v.30 no.3
• /
• pp.111-119
• /
• 2002

Gears are essential elements for mechanical power transmission. Geometric precision is the main factor for characterizing gear grade and qualify. Gear pitch is one of the crucial measurements, which is defined as a distance between two adjacent gear teeth. It is well-known that variability in gear pitches may causes wear-out and vibration noise. Therefore maintaining pitch errors at a low level plays a key role in assuring the gear quality to customers. This paper is concerned with a case study, which presents a computerized system for Inspecting pitch errors in a gear machining process. This system consists of a PC and window-based programs. Although the start and stop is manually accomplished, the process of measuring and analyzing pitch data is automatically conducted in this system. Our purpose lies in reducing inspection cost and time as well as Increasing test reliability. Its operation is briefly illustrated by example. Sometimes a strong autocorrelation is observed from pitch data. We also discuss a process monitoring scheme taking account of autocorrelations.

• Communications for Statistical Applications and Methods
• /
• v.8 no.2
• /
• pp.453-464
• /
• 2001

A commercial nuclear power station contains at least tow emergency diesel generators(EDG) to control the risk of severe core damage during station blackout accidents. Therefore, the reliability of the EDG's to start and load-run on demand must be maintained at a sufficiently high level. Probabilistic safety assessments(PSA) are increasingly being used to quantify the public risk of operating potentially hazardous systems such as nuclear power reactors. In this paper, to perform PSA, we will introduce three different types of data and use Bayes procedure to estimate the error rate of nuclear power plant EDG, and using practical examples, illustrate which method is more reasonable in our situation.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.5
• /
• pp.80-86
• /
• 1995

This paper proposes the design of new digital controller to improve control performance of automation system. The proposed controller improves response time and steady state error in the driving a system to generate a output voltage proportional to the frequency difference of reference input signal and feedback signal, holds good stability and higher accuracy designing an adaptive line density selector and a quantized level controller of slope-varied type. A theoretical and experimental studies have been carried out. Th presented results how the improved performance in the position control of automation system.