• Computers and Concrete
• /
• 제4권6호
• /
• pp.425-436
• /
• 2007

This study is mainly focused on applying Fuller's ideal gradation curve to theoretically design blended ratio of all solid materials of a reactive powder mortar (RPM), also known as reactive powder concrete (RPC), with the aid of error function, and then to study the effect of fly ash/slag on the performance of RPM. The solid particle is assumed to be spherical particles. Then, the void volume of paste ($V_{\nu}$) and the paste content with specific quality can be obtained. As conclusion, under Fuller's ideal grading curve, the amount of fly ash/slag mixture is higher than that with silica fume along due to it better filled the void within solid particle and obtains higher packing density.

• Journal of Communications and Networks
• /
• 제12권6호
• /
• pp.600-604
• /
• 2010

A method of width adaptation in the radial basis function network (RBFN) using stochastic gradient (SG) algorithm is introduced. Using Taylor's expansion of error signal and differentiating the error with respect to the step-size, the optimal time-varying step-size of the width in RBFN is derived. The proposed approach to adjusting widths in RBFN achieves superior learning speed and the steady-state mean square error (MSE) performance in nonlinear channel environment. The proposed method has shown enhanced steady-state MSE performance by more than 3 dB in both nonlinear channel environments. The results confirm that controlling over step-size of the width in RBFN by the proposed algorithm can be an effective approach to enhancement of convergence speed and the steady-state value of MSE.

• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.808-813
• /
• 1999

A fuzzy learning method to control an unstable and multivariable system is presented in this paper, Because the multivariable system has generally a coupling effect between the inputs and outputs, it is difficult to find its modeling equation or parameters. If the system is unstable, initial condition rules are needed to make it stable because learning is nearly impossible. Therefore, this learning method uses the initial rules and introduces a cost function composed of the actual error and error-rate of each output without the modeling equation. To minimize the cost function, we experimentally got the Jacobian matrix in the operating point of the system. From the Jacobian matrix, we can find the direction of the convergence in the learning, and the optimal control rules are finally acquired when the fuzzy rules are updated by changing the portion of the errors and error rates.

• 디지털산업정보학회논문지
• /
• 제8권2호
• /
• pp.1-10
• /
• 2012

In this study, software products developed in the course of testing, software managers in the process of testing software test and test tools for effective learning effects perspective has been studied using the NHPP software. The finite failure nonhomogeneous Poisson process models presented and the life distribution applied exponential and log shaped type hazard function. Software error detection techniques known in advance, but influencing factors for considering the errors found automatically and learning factors, by prior experience, to find precisely the error factor setting up the testing manager are presented comparing the problem. As a result, the learning factor is greater than autonomous errors-detected factor that is generally efficient model could be confirmed. This paper, a failure data analysis of applying using time between failures and parameter estimation using maximum likelihood estimation method, after the efficiency of the data through trend analysis model selection were efficient using the mean square error and coefficient of determination.

• 한국농공학회지
• /
• 제42권4호
• /
• pp.76-86
• /
• 2000

The objective function of reservoir storage error was suggested to simulate daily reservoir inflow. DAWAST model, UMAX, LMAX, FC,CP, CE were calibrated. Daily reservoir inflow was imulated with calibrated parameters and reservoir storage was simulated on a daily basis. The simulated results were compared with the monthly results by Gajiyama equation and ten-day results by Tank rainfall-runoff model through equal value lines and hydrographs . DAWAST model showed the best results compared with Gajiymama equation and Tank model. Especially, DAWAST model showed a good agreement in dry periods. NEW concept using objective function of storage error was believed to be satisfactory and to be applied in estimating reservoir inflow.

• 한국군사과학기술학회지
• /
• 제14권3호
• /
• pp.517-523
• /
• 2011

The estimation filter in radar systems must track targets' position within low tracking error. In the Multi-Function Radar(MFR), ${\alpha}-{\beta}$ filter and Kalman filter are widely used to track single or multiple targets. However, due to target maneuvering, these filters may not reduce tracking error, therefore, may lost target tracks. In this paper, a target tracking filter based on particle filtering algorithm is proposed for the MFR. The advantage of this method is that it can track targets within low tracking error while targets maneuver and reduce impoverishment of particles by the proposed resampling method. From the simulation results, the improved tracking performance is obtained by the proposed filtering algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3048-3050
• /
• 1999

This paper suggests a position estimating algorithm using mono vision system with projective geometry method. Generally, 3-D information can not be easily extracted from mono vision system which is taken by a camera at a specific point. But this defect is overcome by adopting model-based image analysis and selecting lines and points on the ground as natural landmarks. And this paper suggests a method that estimates position from many natural landmarks by distance error weight function.

• 한국통신학회논문지
• /
• 제26권11A호
• /
• pp.1957-1962
• /
• 2001

영상 압축 또는 영상 부호화에서 후처리, 복원, transcoding을 하는 경우, DCT 계수의 양자화 잡음 모델이 필요하다. 양자화 된 계수만 알고 있는 경우에는 양자화 되기 전의 분포를 구할 수 없다. 본 논문에서는 양자화 되기 전의 DCT 계수의 확률 분포함수를 Laplacian으로 가정하고, 양자화된 계수로부터 분산을 구하고 이를 사용하여 양자화 이전의 분산을 추정하는 방법을 제시하였다. 여러 영상을 사용한 실험을 통하여 제안된 방법의 결과가 기존의 방법에서는 분산이 작게 나오는 단점을 보완하는 것을 확인하였다.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.74-84
• /
• 2009

The design and implementation of a high performance PID (Proportional Integral & Differential) style controller with zero-phase error tracking property is considered in this article. Unlike a ball screw driven system, the controller in a direct drive system should provide a high level of tracking performance while avoiding the problems due to the absence of the gear system. The stiff mechanical element in a direct drive system allows high precise positioning capability, but relatively high tracking ability with minimal position error is required. In this work, a feasible position controller named 'Unified PID controller' is presented. It will be shown that the function of the closed position loop can be designed into unity gain system in continuous time domain to provide minimal position error. The focus of this work is in two areas. First, easy gain tunable PID position controller without speed control loop is designed in order to construct feasible high performance drive system. Second, a simple but powerful zero phase error tracking strategy using the pre-designed function of the main control loop is presented for minimal tracking error in all operating conditions. Experimental results with a s-curve based position pattern commonly used in industrial field demonstrate the feasibility and effective performance of the approach.

• 인터넷정보학회논문지
• /
• 제19권3호
• /
• pp.49-56
• /
• 2018

오차 신호에 대해 가우시안 커널이 가지는 과도신호 차단효과를 기반으로 설계된 오차분포와 델타함수 사이의 유클리드 거리(ED)가 충격성 잡음하에서 효과적인 성능준거로 사용되어왔다. ED의 최소화 과정에서 필요한 기울기는 두 가지 성분, 즉, 오차 쌍의 커널함수에 대한 성분$A_k$와 오차 샘플 자체의 커널함수에 대한 성분 $B_k$를 가진다. 이 논문에서는 성분 $A_k$가 오차 샘플들을 서로 결집시키는 역할과 관련되어 있으며, 성분 $B_k$는 오차샘플들의 결집위치가 영(0)이 되는 문제와 관련되어 있다고 분석되었다. 이 분석에 기반하여, 이 논문에서는 오차 샘플간 간격을 좁히는 역할을 강화하고자 $A_k$를 커널 통과된 오차쌍의 전력으로 정규화하고, 오차 샘플들을 0점에 당기는 역할을 강화하고자 $B_k$를 커널 통과된 오차샘플 자체의 전력으로 정규화하는 방안을 제안하였다. 충격성 잡음과 다중경로 페이딩 채널 환경하에서 시뮬레이션을 시행하여, 정상상태의 MSE 가지는 흔들림 정도와 최소 MSE 값을 비교 분석하였다. 그 결과, 제안된 방식이 가지는 효용성과 두 성분의 역할이 분석과 일치함이 규명되었다.