• International journal of advanced smart convergence
• /
• 제11권4호
• /
• pp.28-40
• /
• 2022

Although precise temperature control in the heat treatment process is a key factor in process reliability, there are many cases where there is no separate heat source control optimization system in the field. To solve this problem, the program monitors the temperature data according to the heat source change through sensor communication in a recursive method based on multiple variables that affect the process, and the target heat source value and the actual heat treatment heat source to match the internal air temperature and material temperature. A control optimization system was constructed. Through this study, the error rate between the target temperature and the atmosphere (material surface) temperature of around 10.7% with the existing heat source control method was improved to an improved result of around 0.1% using a process optimization algorithm and system.

• 한국음향학회지
• /
• 제43권3호
• /
• pp.324-334
• /
• 2024

파면곡률거리추정(Wavefront Curvature Ranging, WCR)은 음파의 파면곡률로부터 음원의 거리를 추정하는 방법이다. 기존의 파면곡률거리추정은 음속을 상수로 가정하고 삼각법으로 거리를 추정한다. 이 가정 때문에 해저면반사경로가 뚜렷하게 분리되는 해양환경에서는 거리 오차가 발생한다. 거리 오차를 줄이기 위해 해양의 음속구조를 적용하고 최대우도추정(Maximum Likelihood Estimation, MLE)방법으로 거리를 추정하는 정합 파면곡률거리추정(Matched Wavefront Curvature Ranging, MWCR) 을 제안하였다. 정합 파면곡률거리추정의 시뮬레이션 결과로부터 거리 오차의 감소를 확인하였다. 향후에 실측 신호로부터 거리 추정의 신뢰성을 확인하면 소나 시스템에 적용 가능할 것이다.

• 한국전자파학회논문지
• /
• 제15권12호
• /
• pp.1184-1189
• /
• 2004

본 논문에서는 직교신호를 발생할 수 있는 새로운 구조의 전압제어 발진기를 설계 제작하였다. 정확한 직교 신호 특성과 낮은 위상잡음 특성을 동시에 얻기 위하여 결합 증폭기의 source단자에 저항 궤환을 이용하여 차동 발진기를 결합시켰다. 발진기는 0.18 um 표준 CMOS 공정을 이용하여 제작하였다. 제작한 발질기의 위상잡음 특성은 -120 dBc/Hz @ 1 MHz 0$\~$1.8 V 전압을 가변하였을 때, 2.34 GHz$\~$2.55 GHz의 210 MHz 주파수 가변을 얻었다. 또한 낮은 IF 주파수 혼합기와 결합하여 측정한 결과 직교신호의 위상 오차는 0.5도, 진폭 오차는 0.2 dB 이하를 보였다. 바이어스 전류는 1.8 V 공급전압에 대해 전압제어발진기의 Core 부분 5 mA를 포함하여 전체적으로는 19 mA를 요구한다.

• 한국소음진동공학회논문집
• /
• 제14권2호
• /
• pp.164-171
• /
• 2004

Active control techniques have been used in wide areas of noise and nitration control engineering and a noise barrier is one of them. Omoto's work in 1993 would be one of the fundamental and systematic studies on the actively controlled noise barrier, in which he used equal number of control sources and error sensors. The error sensors were placed uniformly along the top edge of the noise barrier with equal distance apart and the control sources were placed in the exactly same way some distance apart from the error sensors. Since then, a couple of studies were made on the secondary sources'arrangement rather than the optimality of secondary source positions. Shao's results showed that arc shaped arrangement for secondary sources is better than the straight line one, and later work of Yang showed that the more important factor is the average distance between the primary source and secondary sources. However, since these studies were all executed with a simple uniform distribution of the secondary sources along the straight line or arc, it is difficult to conclude which arrangement is superior In order for the fare comparison. the optimality of the source positions in each arrangement must be given in prior. The primary goal of this study is focused on this aspect and some major factors were investigated and compared. The computer simulation results showed that the arc shaped arrangement is marginally better than the straight line one, and more importantly slightly tuned position can greatly improve the performance of the control system.

• 한국컴퓨터정보학회논문지
• /
• 제13권2호
• /
• pp.19-29
• /
• 2008

단위 시험은 모듈의 소스 코드를 면밀히 검토하면서 논리적 오류나 문장 오류 등이 있는지 분석하는 화이트박스 시험이 가능하다. 반면 시스템 수준의 기능 시험은 규모가 크기 때문에 시험 데이터를 입력한 후 출력된 결과가 예상 결과와 같은지 비교하는 블랙박스 시험이 주를 이룬다. 이러한 시스템 시험 단계에서 사용하는 블랙박스시험은 오류를 발견하더라고 수정을 위해 소스 코드를 추적하기 어려운 문제점이 있다. 뿐만 아니라 시스템 시험 단계에 화이트박스 시험을 사용하는 것은 시험 대상의 추상 수준 달라 쉽지 않다. 이에 본 논문에서는 시스템의 기능처럼 높은 추상 수준을 시험 대상으로 하되 소스 코드 수준까지 화이트박스 스타일로 시험할 수 있는 현실적이고 통합된 시스템 수준의 수직적 시험에 대해 제안한다. 그리고 어떻게 수직적 시험을 적용하는지 UML명세 모델에서 소스코드까지 오류를 추적하는 방법을 사례를 통해 설명하고 더불어 오류 추적의 효과성을 보였다.

• 전기전자학회논문지
• /
• 제2권2호
• /
• pp.285-293
• /
• 1998

This paper presents unequal error protection and error concealment techniques far robust H.263 video transmission over mobile channels. The proposed error protection scheme has three major features. First, it has the capability of preventing the loss of synchronization information in H.263 video stream as much as possible that the H.263 decoder can resynchronize at the next decoding point, if errors are occurred. Secondly, it employs an unequal error protection scheme to support variable coding rates using rate compatible punctured convolutional (RCPC) codes, dividing the encoded stream into two classes. Finally, a macroblock-interleaving scheme is employed in order to minimize the corruption of consecutive macroblocks due to burst errors, which can make a proper condition for error concealment. In addition, to minimize the spatial error propagations due to the variable length codes, a fast resynchronization scheme at the group of block layer is developed for recovering subsequent error-free macroblocks following the damaged macroblock. futhermore, error concealment techniques based on both side match criterion and overlapped block motion compensation (OBMC) are employed at the source decoder so that it can not only recover the lost macroblock more accurately, but also reduce blocking artifacts. Experimental results show that the proposed scheme can be an effective error protection scheme since proper video quality can be maintained under various channel bit error rates.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.211-214
• /
• 2000

An error analysis is very important for a precision machine tool to estimate its performance. This study proposes a new parallel device, a cubic parallel manipulator. Errors of the proposed cubic parallel manipulator include universal joint errors, errors occurring due to changes in the fore directions in the links, and actuation errors. An error analysis is performed for the manipulator platform moving at uniform velocity. The analysis shows how the position and orientation of the platform influences the directional link forces that change the errors in the manipulator. The analysis shows that the method can be used in predicting the accuracy of parallel devices.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.73-77
• /
• 1997

This paper describes the analysis of measuring error of on the machine measuring(OMM) system which can directly measure the three dimensional machined free surface dimension using scanning probe on milling machine. 21 inch TV shadow mask mould was measured using PTP(point to point)measurement algorithm at pallet clamped and unclamped state on OMM system, and using coordinate measuring machine(CMM) one after another. The OMM system was evaluated probe error, stylus contact error, center shift error, repeatability and so on. Consequencely, the conclusion derived that elastic displacement of pallet had effect on measuring error mainly, and pallet design and setup method would be important.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.42-47
• /
• 2012

Construction equipment is heavily loaded during normal operation. In recent years, there is a trend that lower gear noise levels are demanded for drivers to avoid annoyance and fatigue during operation. For articulated hauler's final drive, meshing transmission error(T.E.) is the excitation that leads the tonal noise known as gear whine, and radiated gear whine is also the dominant source of noise in the whole gearbox. This paper presents a method for the analysis of the tooth profile modification, and the prediction of transmission error under the loaded torques for the spur gear pair of the articulated hauler's final drive. And the transmission error, transmission error harmonics and contact stress are also calculated and compared before and after tooth modification under one torque. The simulation result shows that the transmission error and contact stress under the loads can be minimized by the appropriate tooth profile modification.

• 소음진동
• /
• 제8권3호
• /
• pp.542-552
• /
• 1998

The noise sources, structure-borne and/or air-borne, in machinery can be defined by their locations and strengths. However the locations of that noise sources are well known in many cases. In those cases, the problem can be defined as an inverse problem to known the strengths of the noise sources in the frequency domain, the modeling scheme is classified by thecoherent or incoherent source. This paper expands the basic concept to the case of the complex noise sources, in which the set of coherent and incoherent noise sources are matched with the noise of a real vehicle. The error factors in the experiment and the optimal number of the monopole sources to match the real suond filed are also investigated. The results of the noise source modeling of heavy machinery show that the incoherent and coherent/incoherent source models are applicable to the high frequency and the low frequency region, respectively. The noise source model also enables the noise source analysis to rank the contribution of real source group such as engine, T/M, exhuast, etc.