• Spatial Information Research
• /
• v.18 no.4
• /
• pp.43-53
• /
• 2010

A dam is effective in stable supply of water required in daily life and reduction of damage from floods. hut a lot of land or houses arc submerged due to the construction of a darn heavily affecting environment in surrounding areas. In order to improve and support daily life environment. surrounding a dam, many projects have been conducted. and the study has focused on analyzing bow to calculate error characteristics of scale effect for submerged area by using GIS spatial overlay. First, as a result of areal error in submerged area by scale based on a 1/3,000 digital topographic map, it was found that the 1/5,000 digital topographic map is 9.5 times, 9.0 times and 10.5 times more accurate than the 1/25,000 digital topographic map, respectively, in the total of areal error, standard error and areal error for submerged area. Second, as a result of analysis on areal error in areas surrounding a dam, it has been found that Jinan-eup in Jinan-gun registered the largest difference in area within 2km and 2~5km catchment area by recording 13.8 times and 20.6 times, respectively, in the 1/5,000 digital topographic map compared to the 1/25,000 digital topographic map. In addition, in areas out of catchment area within 2km, the area of occupation was very small, so there were no characteristics in error. The out of catchment area, Nami-myeon in Geumsan-gun recorded the largest errors of 31.8 times. Finally, it was found that the ratio of the total areal error in area surrounding a dam, standard error and the total areal error in the entire area using 1,5000 digital topographic map is 7.4 times, 11.8 times and 7.4 times more accurate than the 1/25,000 digital topographic map.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.115-121
• /
• 2013

This paper related with the DSE-MMA (Dithered Sign-Error MMA) that is the simplification of computational arithmetic number in blind equalization algorithm in order to compensates the intersymbol interference which occurs the passing the nonlinear communication channel in the presence of the band limit and phase distortion. The SE-MMA algorithm has a merit of H/W implementation for the possible to reduction of computational arithmetic number using the 1 bit quantizer in stead of multiplication in the updating the equalizer tap weight. But it degradates the overall blind equalization algorithm performance by the information loss at the quantization process compare to the MMA. The DSE-MMA which implements the dithered signed-error concepts by using the dither signal before qualtization are added to MMA, then the improved SNR performance which represents the roburstness of equalization algorithm are obtained. It has a concurrently compensation capability of the amplitude and phase distortion due to intersymbol interference like as the SE-MMA and MMA algorithm. The paper uses the equalizer output signal, residual isi, MD, MSE learning curve and SER curve for the performance index of blind equalization algorithm, and the computer simulation were performed in order to compare the SE-MMA and DSE-MMA applying the same performance index. As a result of simulation, the DSE-MMA can improving the roburstness and the value of every performance index after steady state than the SE-MMA, and confirmed that the DSE-MMA has slow convergence speed which meaning the reaching the seady state from initial state of adaptive equalization filter.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.146-154
• /
• 2007

In this paper, we have presented a real-time transfer mechanism for the delay-sensitive data in WSNs (Wireless Sensor Networks). The existing methods for real-time data transfer select a path whose latency is shortest or the number of hops is least. Although the approaches of these methods are acceptable, they do not always work as efficiently as they can because they had no consideration for the link error rates. In the case of transmission failures on links, they can not guarantee the end-to-end real-time transfer due to retransmissions. Therefore, we have proposed an algorithm to select a real-time transfer path in consideration of the link error rates. Our mechanism estimates the 1-hop delay based on the link error rate between two neighboring nodes, which in turn enables the calculation of the expected end-to-end delay. A source node comes to choose a path with the shortest end-to-end delay as a real-time route, and sends data along the path chosen. We performed various experiments changing the link error rates and discovered that this proposed mechanism improves the speed of event-to-sink data transfer and reduces delay jitter. We also found that this mechanism prevents additional energy consumption and prolongs network lifetime, resulting from the elative reduction of transmission failures and retransmissions.

• Journal of Environmental Science International
• /
• v.3 no.3
• /
• pp.185-195
• /
• 1994

Masan bay is one of the polluted enclosed bays, which has red tides problem and the formation of oxygen deficient water in the bottom layer. Most important factors that cause eutrophication and red tide is nutrient materials containing nitrogen and phosphorus which stem from terrestrial sources and nutrients released from sediment. Therefore, to improve of water quality, reduction of these nutrient loads should be indispensible. At this study, the three-dimensional numerical hydrodynamic and eutrophication model, which were developed by Institute for Resources and Environment of Japan, were applied to analyze the processes affecting the phytoplankton production and also to evaluate the effect of water quality improvement plans on phytoplankton production. In field sorvey, the range of concentrations of chlorophyll-a at surface area was found to be 29.17 - 212.5mg/m3, which were exceeding eutrophication criteria. The constant currents defined by integrating the simulated tidal currents over 1 tidal cycle showed the counterclockwise eddies in the southern part of Budo. The general directions of constant currents were found to be southward at surface and northward at bottom over all the bay. The eutrophication model was calibrated with the data surveyed in the field area in June, 1993. The calculated results are in fairly good agreement with values within relative error of 30%. The pollutant load from the sources such as the input from terrestrial release from the sediment was reduced by the rate of 50, 70, 90, 98% to effect of phytoplankton production. Phytoplankton production was reduced to of the 90% reduction of the input loads from terrestrial sources and 8% in 90% reduction of the load from sediment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.246-252
• /
• 2016

In this paper, reduction of monostatic RCS by DBD plasma is measured. For the calibration of monostatic RCS, S-parameters of two metallic plate in different sizes are used and the result is within 0.4 dB error. Metallic plate is put behind DBD plasma generator for measuring reduction of monostatic RCS by DBD plasma. To prevent arc discharge between metallic plate and DBD plasma generator, measurement is progressed spacing the interval between metallic plate and DBD plasma generator. As a result, maximum reduction of monostatic RCS is about 3 dB at 7.4 GHz.

• Journal of Korean Society of Transportation
• /
• v.27 no.3
• /
• pp.141-148
• /
• 2009

An inappropriate evaluation of capacity leads to the incorrect and impractical result due to the transfer of error to the analysis and the evaluation on highway system. The traffic accident which reduces the capacity of road temporarily generates unpredictable congestion, causing difficulties in congestion management. Therefore, this research aims on the measurement of the capacity of the road in accordance to the speed at the accident which is a basic factor when performing analysis. Based on the given approach, the behavior of a vehicle in highway is understood to develop model of critical gap and model of maximum flow rate with respect to the speed of traffic flow. With the established model, the reduction rate of the capacity in highway system at the accident is measured. The result shows that the capacity is reduced by 37% when the speed of the traffic flow is 40km/h. Although the developed model can't be verified clearly, this research has shown that the reduction rate of the capacity in road system has a close relation to the speed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.9
• /
• pp.933-941
• /
• 2014

This paper provides a comparison between the Krylov subspace method (KSM) and modal truncation method (MTM), which are typical projection-based model order reduction methods. The frequency responses are compared to determine the numerical accuracies and efficiencies. In order to compare the numerical accuracies of the KSM and MTM, the frequency responses and relative errors according to the order of the reduced model and frequency of interest are studied. Subsequently, a numerical examination shows whether a reduced order can be determined automatically with the help of an error convergence indicator. As for the numerical efficiency, the computation time needed to generate the projection matrix and the solution time to perform a frequency response analysis are compared according to the reduced order. A finite element model for a car suspension is considered as an application example of the numerical comparison.

• Journal of Biomedical Engineering Research
• /
• v.37 no.4
• /
• pp.140-146
• /
• 2016

The ultrasound imaging in medical diagnosis has become a popular modality because of its safe, noninvasive, portable, relatively inexpensive, and provides a real-time image formation. However, usefulness of ultrasound imaging is at times limited due to the presence of signal-dependent noise like as speckle. Therefore, noise reduction is very important, as various types of noise generated limits the effectiveness of medical image diagnosis. This paper introduces a speckle noise reduce algorithm using total variation denoising (TVD) in Laplacian pyramid. With this method, speckle is removed by TVD of bandpass ultrasound images in Laplacian pyramid domain. For TVD in each pyramid layer, a ${\lambda}$ is selected by trial-and-error method. The visual comparison of despeckled 'in vivo' ultrasound images from pancreas shows that the proposed method could effectively preserve edges and detailed structures while thoroughly suppressing speckle. For a Simulated B-mode image, contrast-to-noise-ratio (CNR) and signal-to-noise-ratio (SNR) were obtained like 4.65 dB and 14.11 dB, respectively. The results show that the proposed method can conduct better than some of the existing methods in terms of the CNR and the SNR.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.87-92
• /
• 2017

This paper compares the equalization algorithm of CR-MMA (Constellation Reduction-Multi Modulus Algorithm) and RMMA (Region based Multi Modulus Algorithm) for the compensation of channel's distortion in nonconstant modulus signal. In order to obtain the error signal for adaptive equalization, every signal points are reduced to the constant modulus signal in CR-MMA and every signal points are separated into the 4 regions, then the reductions are performed based on this region in RMMA. These two algorithm based on the reduction principle such as in order to updating the tap coefficient in the adaptive equalization, it has different equalization performance. The computer simulation was performed in order to compare the each equalization performance in this paper. As a result of computer simulation, RMMA has more good performance in the residual isi, maximum distortion and SER performance than CR-MMA, but not in convergence speed.

• Environmental and Resource Economics Review
• /
• v.19 no.4
• /
• pp.875-896
• /
• 2010

Using the difference in differences (DID) estimation method, this paper analyzes the effect of European Union's Emission Trading Scheme (EU ETS) on the reduction of per capita $CO_2$ emission among the twenty five participating countries. For this, the panel dataset of forty two European countries for the period 1990~2007 is constructed. Special attention is paid to the bias of the standard errors in the DID estimation due to the presence of serial correlation in the error terms. The results shows quite a robust effect of EU ETS on the reduction of per capita $CO_2$ emission among the participating countries regardless of the calculation methods of standard errors. The results also shows that the increased implicit tax rate on energy has a robust effect on the reduction of per capita $CO_2$ emission. On the contrary, the estimation results regarding the effects of per capita GDP and population density on the per capita $CO_2$ emission seem inconsistent. In particular, the environmental Kuznets curve is not statistically supported with the use of robust standard errors.