• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.918-920
• /
• 2001

PMSM drives are widely used in industrial and residential applications because of high efficiency, high power density and high performance. For better performance of PMSM, however, torque ripples should be reduced. This paper investigates a reduction of torque ripple due to the unsinusoidal flux linkage produced by the shapes of stator slot and magnetic pole. To minimize torque ripple, a simple flux estimator is proposed. This method iteratively compensates the distributed flux linkage from an error between the measured and estimated currents. The proposed algorithm is verified through simulation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.3
• /
• pp.200-208
• /
• 2001

In indoor temperature control of a heat pump, a reduction in energy consumption is very important. However, most control schemes for heat pumps have focused only on control performance such s settling time and steady-state error. In this paper, the model predictive control (MPC) which includes the energy-related variable in this cost function is proposed. By computing the control signal minimizing this cost function, the trade-off between energy reduction and temperature control performance can be obtained. Since the MPC required the process model, the dynamic mode of a heat pump is also obtained by the system identification technique. Performance of the proposed MPC considering energy efficiency is compared with the two other control schemes. It si shown that the proposed scheme can consume less energy thant hte others in achieving similar control performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.514-518
• /
• 2005

In this paper an adaptive fuzzy PI controller with feedback linearizing meth od is implemented to controlling flux and torque separately in induction motor. In this paper first decoupling of torque and flux which are outputs to be controlled, is achieved by using feedback linearization methodology. Then for reducing the effect of noise and rejection of disturbance, main part of controller which is adaptive PI fuzzy controller, is designed. Coefficients of PI controller are determined by defined fuzzy rules due to error dynamic. Inputs of fuzzy system are defined sliding surfaces which consist of torque and flux errors. The main contribution of this paper is effect reduction of noise and disturbance on torque and flux which is based on fuzzy logic and nonlinear control. At last the effectiveness of the proposed control scheme in presence of noise and load disturbance is simulated and comprised to applying sliding method. The results verify better effectiveness of the proposed method for effect reduction of noise and disturbance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.290-293
• /
• 2008

This paper proposes a criterion to select the modes for modal truncated model of flexible rotor only supported by active magnetic bearings. The proposed approach relies on the concepts of minimum control input and output energy assuming that the system is subjected to transient disturbances. Accurate large order model for the levitated rotor is taken by finite element analysis and transformed to the modal equation. By proposed methodology, which modal states should be retained in the truncated model are investigated over the whole operational speed range by the calculation. Finally, the effectiveness is verified by checking the model error between original model and reduced model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.7
• /
• pp.401-403
• /
• 2014

In this paper, we address data detection technique using Fixed complexity LLL-based signal detection over multi-antenna SC-FDMA wireless channels. We use the property of effective channel matrix of SC-FDMA system. We can make the large effective channel matrix to various small effective channel matrix. We show that error performance of proposed detection technique.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.161-161
• /
• 2010

In order to achieve low power consumption and the uniform power spectrum of LED BLU (Back Light Unit) system, new circuits with a 2 stage L-C (Inductor-Capacitor) coupler have been proposed. From the simulation results based on our proposed model, the ripple power of the L-C regulation-embedded BLU circuit shows a dramatic reduction by more than 89.3% as compared to the normal BLU (without L-C circuits). This indicates that the proposed circuit is very promising for the realization of high-efficiency BLU circuits.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.62.3-62
• /
• 2002

In this paper, we proposed a control technique that can be applied to various processes. The most of the process can bereduced to second order plus time delay (SOPTD) model. And we proposed improved model reduction algorithm using geneticalgorithm. This method considered four points to reduce the error between original model and reduced model in the Nyquistcurve. And, to compensate time delay, the Smith predictor plus PID controller is adopted. And a new PID tuning algorithm wasproposed, which got from numerical analysis and can be obtained the optimal performance. The PID parameters are obtainedfrom the coefficients and time delay of reduced model. The simulation results show the validity.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.492-502
• /
• 2012

We consider an overlaid broadcast service, where a spread spectrum (SS)-based broadcast signal is overlaid onto the existing terrestrial Digital Multimedia Broadcasting (T-DMB) band. The system is similar to the augmented data transmission in the ATSC DTV, for which it was investigated mostly in terms of link level performance, such as bit error rate. Our focus in this paper is on the system-level performances. More specifically, utilizing both a large scale path loss and a small scale fading channel model, the primary objective is to explore the tradeoff between the coverage and the achievable rate of the overlaid service and, finally, to determine the achievable rate in the overlaid service for marginal coverage reduction in the existing broadcast service. The analytical and simulation results show that an SS-based add-on service of 10 kbps to 20 kbps can co-exist with the T-DMB service while resulting in only a marginal degradation in T-DMB coverage (for example, less than one percent reduction).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.808-812
• /
• 1996

Reduction gear with internal gear pair need functions such as compact size, high reduction ratios, high transmission efficiency, and low noise. Feasible design region of the internal gear pair with a small tooth difference is extremely limited because the internal gear pair is subject to interference in meshing and cutting. Single-objective optimal design can not simulataneously satisfy the manifold requirements of the internal gear pair and can not determine the economical specification of a pinion cutter. Multi-objective optimal design which include the specification of the pinion cutter in design variables is developed, considering the manufacturing error of an internalgear pair and the re-sharpening of the pinion cutter.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.4
• /
• pp.748-755
• /
• 2001

This paper concerns rotor vibration reduction using magnetic damper system. The fuzzy control logic is utilized to fulfill desired motion. The fuzzy system structure and membership function were first determined by simulation results. The researched control logic contains two fuzzy controller : reference position variation according to the rotor whirling status and error compensation algorithm to minimize the rotor vibration due to unbalance and unstable fluid film force. The Sugeno type output membership function was utilized by several trials and optimized membership function constants were selected from experiments. The experimental results show that the proposed method effectively control and reduce the rotor vibration with fluid film bearings.