• 환경위생공학
• /
• 제17권1호
• /
• pp.28-35
• /
• 2002

본 연구 목적은 계측저항이 없는 열선유속계를 이용하여 매립지 가스의 유량을 산정할 때 가스조성에 의해 발생되는 계측오차를 최소화할 수 있는 방안을 제시하고자하였다. Rotor meter와 가스조성 밀도를 이용하여 산정한 관 중심유속을 계측저항이 없는 열선유속계를 이용하여 구한 관 중심유속을 비교함으로서 계측오차를 측정하였다. 실험결과 열선 유속계와 rotor meter를 이용한 매립지 가스유속 계측오차의 최소화 방안을 통하여 매립지 가스유량의 오차 범위를 10% 이내로 최소화 할 수 있는 것으로 조사되었다.

• 제어로봇시스템학회논문지
• /
• 제21권7호
• /
• pp.684-690
• /
• 2015

This paper presents a modified residual-based EKF (Extended Kalman Filter) for performance improvement of indoor positioning using WiFi RSSI (Received Signal Strength Indicator) measurement. Radio signal strength in indoor environments may have irregular attenuation characteristics due to obstacles such as walls, furniture, etc. Therefore, the performance of the RSSI-based positioning with the conventional trilateration method or Kalman filter is insufficient to provide location-based accurate information services. In order to enhance the performance of indoor positioning, in this paper, error analysis of the distance calculated by using the WiFi RSSI measurement is performed based on the radio propagation model. Then, an IARM (Irregularly Attenuated RSSI Measurement) error is defined. Also, it shows that the IARM error is included in the residual of the positioning filter. The IARM error is always positive. So, it is presented that the IARM error can be estimated by taking the absolute value of the residual. Consequently, accurate positioning can be achieved based on the IEM (IARM Error Mitigated) EKF with the residual modified by using the estimated IARM error. The performance of the presented IEM EKF is verified experimentally.

• 한국군사과학기술학회지
• /
• 제27권2호
• /
• pp.127-139
• /
• 2024

This paper discusses a gravity compensation technique designed to reduce wavefront error caused by gravity during the assembly and alignment of satellite multi-band optical sensor. For this study, the wavefront error caused by gravity was analyzed for the opto-mechanical structure of multi-band optical sensor. Wavefront error, an indicator of optical performance, was computed by using the displacements of optics calculated through structural analysis and optical sensitivity calculated through optical analysis. Since the calculated wavefront error caused by gravity exceeded the allocated budget, the gravity compensation technique was required. This compensation technique reduces wavefront error effectively by applying the compensation load to the appropriate position of the housing tube. This method successfully meets the wavefront error budget for all bands. In the future, a gravity compensation equipment applying this technique will be manufactured and used for assembly and alignment of multi-band optical sensor.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.481-486
• /
• 2007

The Zienkiewicz-Zhu(Z/Z) error estimate is slightly modified for the hierarchical p-refinement, and is then applied to L-shaped plates subjected to bending to demonstrate its effectiveness. An adaptive procedure in finite element analysis is presented by p-refinement of meshes in conjunction with a posteriori error estimator that is based on the superconvergent patch recovery(SPR) technique. The modified Z/Z error estimate p-refinement is different from the conventional approach because the high order shape functions based on integrals of Legendre polynomials are used to interpolate displacements within an element, on the other hand, the same order of basis function based on Pascal's triangle tree is also used to interpolate recovered stresses. The least-square method is used to fit a polynomial to the stresses computed at the sampling points. The strategy of finding a nearly optimal distribution of polynomial degrees on a fixed finite element mesh is discussed such that a particular element has to be refined automatically to obtain an acceptable level of accuracy by increasing p-levels non-uniformly or selectively. It is noted that the error decreases rapidly with an increase in the number of degrees of freedom and the sequences of p-distributions obtained by the proposed error indicator closely follow the optimal trajectory.

• 전산구조공학
• /
• 제3권3호
• /
• pp.125-131
• /
• 1990

본 논문에서는 시간 종속 하중을 받는 대형 전산구조응력 해석 문제를 위한 유한요소 모델링 기법이 소개된다. 유한요소모델링의 분할기준은 문제에 대한 해석 결과에 대한 오차선정에 근거를 둔다. 이 오차산정은 해석결과치에 의한 잔유 에너지의 크기를 유한요소별로 산정한다. 이의 시간존장 구조물에 대한 응용은, 구조연속체의 Ritz 고유진동 모드를 계산하고 이들 진동 모드 중에서 저주파에 상응하는 진동모드에 대해 잔유 에너지의 크기가 구조체 전체영역에서 평형을 유지하도록 유한요소 모델링을 수행한다. 마지막으로, 여기서 제안된 알고리즘이 몇 예제들을 통해서 검증된다.

• 대한임베디드공학회논문지
• /
• 제4권4호
• /
• pp.148-155
• /
• 2009

Precise localization heavily relies on the accuracy of its underlying ranging technique. It has been known that the Chirp Spread Spectrum (CSS) defined in the IEEE 802.15.4a provides more dependable ranging accuracy than the Received Signal Strength Indicator (RSSI) in the IEEE 802.15.4. This paper examines the accuracy of the CSS-based ranging technique in the indoor/outdoor environments and discovers its consistent inaccuracy in different environments. Next, it proposes an error-correction architecture for the CSS-based ranging technique that exploits the per-environment consistent inaccuracy information and user visiting patterns (represented by weights for each environment).

• 한국안전학회지
• /
• 제31권1호
• /
• pp.132-138
• /
• 2016

The purpose of this study was to develop safety competences, a set of behavioral indicators of each competence and measuring methods of behavioral indicators for preventing human error of nuclear power plants(NPPs). The safety competences and behavioral indicators were derived from the five steps consisted of derivation of preliminary competence items through literature review, content analysis, interview(FGI, BEI), examination of content validity and decision making of final indicators. The results showed that 13 core safety competences and 35 behavior indicators were derived finally. In addition, the methods of measuring safety competences or behavioral indicators such as Behaviorally Anchored Rating Scale (BARS), Behavior Observation Scale (BOS) were developed and suggested.

• 제어로봇시스템학회논문지
• /
• 제20권7호
• /
• pp.774-781
• /
• 2014

This paper presents a fingerprint database construction method for WLAN RSSI (Received Signal Strength Indicator)-based indoor positioning. When RSSI is used for indoor positioning, the fingerprint method can achieve more accurate positioning than trilateration and centroid methods. However, a FD (Fingerprint Database) must be constructed before positioning. This step is a very laborious process. To reduce the drawbacks of the fingerprint method, a radio propagation model-based FD construction method is presented. In this method, an FD can be constructed by a simulator. Experimental results show that the constructed FD-based positioning has a 3.17m (CEP) error. In this paper, a spatial correlation method is presented to estimate the NLOS(Non-Line of Sight) error included in the FD constructed by a simulator. As a result, the NLOS error of the FD is reduced and the performance of the error compensated FD-based positioning is improved. The experimental results show that the enhanced FD-based positioning has a 2.58m (CEP) error that is a reasonable performance for indoor LBS (Location Based Service).

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1203-1215
• /
• 2019

Sensorless brushless DC (BLDC) motor drive systems are often subjected to inaccurate commutation signals and can produce high current peaks and conduction consumption. To achieve accurate commutation, a fast commutation shift regulation method for sensorless BLDC motor drive systems considering the influence of the inductance freewheeling process is presented to compensate inaccurate commutation signals. The regulation method is effective in both steady speed and variable speed operations. In the proposed method, the commutation error is gained from the line-voltage difference integral in a 60 electrical-degree conduction period and the outgoing phase current before commutation. In addition, the detection precision of the commutation error is improved due to the consideration of the freewheeling period. The commutation error is directly obtained, which avoids successive optimization and accelerates the convergence rate of the proposed method. Moreover, the commutation error features a positive or negative sign, which can be utilized as an indicator of advanced or delayed commutation. Finally, experiments are conducted to validate the effectiveness and feasibility of the proposed method. The results obtained show that the proposed method can accurately regulate commutation signals.

• 대한화학회지
• /
• 제33권2호
• /
• pp.203-207
• /
• 1989

지시약 메틸레드 용액을 시료용액에 첨가하고 지시약의 산형의 최대흡수파장과 염기형의 최대 흡수파장 및 등흡광점에서 이 시료액 흡광도를 측정하였다. 이를 측정한 흡광도로부터 이 용액의 pH를 계산하였다. 등흡광점에서 흡광도 범위를 0.1내지 0.3으로 유지하고 시료용액의 pH가 $pK_I{\pm}1$내에서, pH측정오차는 ${\pm}$0.08pH 단위 이내이었다.