• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.1
• /
• pp.71-78
• /
• 2017

Many studies have been implemented to manage solar plant being supplied widely in recent years. This study analyzed heat emission of solar cell using unmanned aerial vehicle(UAV)-based thermal infrared sensor, and major conclusions are as belows. Firstly, orthomosaic image and digital surface model(DSM) data were acquired using UAV-based RGB sensor, and solar light module layer necessary to analyze the heat emission of solar cell was constructed by these data. Also as a result of horizontal error into validation points using virtual reference service(VRS) survey for evaluating the location accuracy of solar light module layer, higher location accuracy could be acquired like standard error of $dx={\pm}2.4cm$ and $dy={\pm}3.2cm$. And this study installed rubber patch to test the heat emission of solar cell and could analyzed efficiently the location of rubber patch being emitted heat using UAV-based thermal infrared sensor. Also standard error showd as ${\pm}3.5%$ in analysis between calculated cell ratio by rubber patch and analyzed cell ratio by UAV-based thermal infrared sensor. Therefore, it could be efficiently analyzed to heat emission of solar cell using UAV-based thermal infrared sensor. Also efficient maintenance of solar plant could be possible through extracting the code of solar light module being emitted of heat automatically.

• Convergence Security Journal
• /
• v.7 no.1
• /
• pp.29-34
• /
• 2007

Recently, the distribution and using of the digital multimedia contents are easy by developing the internet application program and related technology. However, the digital signal is easily duplicated and the duplicates have the same quality compare with original digital signal. To solve this problem, there is the multimedia fingerprint which is studied for the protection of copyright. Fingerprinting scheme is a technique which supports copyright protection to track redistributers of electronic information using cryptographic techniques. Only regular user can know the inserted fingerprint data in fingerprinting schemes differ from a symmetric/asymmetric scheme and the scheme guarantee an anonymous before re-contributed data. In this paper, we present a new scheme which is the detection of colluded multimedia fingerprint by neural network. This proposed scheme is consists of the anti-collusion code generation and the neural network for the error correction.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.183-191
• /
• 2010

In the recent digital communication systems, the performance of Turbo Code used as the error correction coding method depends on the interleaver size influencing the free distance determination and the iterative decoding algorithms of the turbo decoder. However, some iterations are needed to get a better performance, but these processes require a large time delay. Recently methods of reducing the number of iteration have been studied without degrading original performance. In this paper, the new method of combining ME (Mean Estimate) stopping criterion with SDR (sign difference ratio) stopping criterion among previous stopping criteria is proposed, and the fact of compensating each method's missed detection is verified. Faster decoding is realized that about 1~2 time iterations to reduced through adopting this method into serially concatenated both decoders. System Environments were assumed W-CDMA forward link system with intense MAI (multiple access interference).

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.6
• /
• pp.1542-1555
• /
• 1999

This paper proposes an algorithm for class hierarchies which can optimize member data and member function. This algorithm considers single/multiple inheritance, static/dynamic binding, overloading/overriding, pure virtual/virtual function, and constructor on the hierarchy of C++ class. We need to eliminate unused function that possesses many component element, because the program uses a limited of function in class hierarchies. Previous works on slicing mainly focused on selecting output data and including the related program statement. It was consists of structured programming language and also centralized on error detection, maintenance, and flexible testing. In this paper, we extend to the object-oriented language, makes a linked-table for objects to raise the efficiency of information management, and proposes necessary algorithm for optimizing system Through this process, we can obtain the simplification of program code and the progress of system performance by eliminating unused member data and member function.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.322-327
• /
• 2012

In this paper, a digital phase-locked loop(Digital-PLL) circuit with a new phase-to-digital converter(P2D) is described. The proposed digital PLL is composed a P2D, a digital loop filter(DLF), and a digitally controlled oscillator(DCO). The P2D generates a digital code for a phase error. The proposed P2D used a binary phase frequency detector(BPFD) and a counter in place of a time-to-digital converter(TDC) for simple structure, compact area and low power consumption. The proposed circuit was designed with CMOS 0.18um process. The simulation shows the circuit operates with the 1.0 to 2.2GHz with the power consumption of 16.2mW at 1.65GHz and the circuit occupies the chip area of $0.096mm^2$.

• The KIPS Transactions:PartC
• /
• v.8C no.6
• /
• pp.783-792
• /
• 2001

It is well known that, in the near future, the lifetime of the IPv4 address space will be limited and available 32-bit IP network addresses will not be left any more. In order to solve such IPv4 address space problem in an effective way, the transition to the new version using IPv6 architecture is inevitably required. At present, it is impossible to convert IPv4 into IPv6 at a time, since the coverage and the size of today's Internet is too huge. Therefore, the coexistence of both IPv4 and IPv6 must be arranged in a special and practical fashion for rapid conversion on the whole. IP protocol translation has been proposed to ease the translation of the Internet from IPv4 to IPv6. This paper presents the design and implementation of a transparent transition service that translates packet header as they cross between IPv4 and IPv6 networks. IPv4/IPv6 Translation Protocol is written in c source code and is tested by the local test recommended by ISO, which has the most excellent error detection function. The test was processed with a test scenario and it was found that the results were successful.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1581-1587
• /
• 2021

As embedded system are used widely and variously, multi-edge system, which multiple edges gather and perform complex operations together, is actively operating. In a multi-edge system, it often occurs that an abnormal operation at one edge is transferred to another edge or the entire system goes down. It is necessary to determine and control edge anomalies in order to prevent system down, but this can be a heavy burden on the resource-limited edge. As a solution to this, we use power consumption data to check the state of the edge device and transmit it based on a QRcode to check and control errors at the server. The architecture proposed in this paper is implemented using 'chip-whisperer' to measure the power consumption of the edge and 'Raspberry Pi 3' to implement the server. As a result, the proposed architecture server showed successful data transmission and error determination without additional load appearing at the edge.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.352-360
• /
• 2008

Recently Task Group (TG) 4 of the Institute of Electrical and Electronics Engineers (IEEE) 802.15a has been recommended a system with ranging capability in existence of multiple Simultaneous operating piconets (SOPs) as well as low-cost, low-power. According to the ranging service, coherent and non-coherent based ranging schemes using ternary code have been adopted as a standard. However it is hard to estimate an accurate time of arrival (TOA) in case of using direct sequence based TOA estimation method because pulse repetition interval (PRI) offered by TG is more limited than the maximum excess delay (MED) of channel. To mitigate inter pulse interference (IPI) problem, this paper proposes a non-coherent TOA estimation scheme using non-periodic transmission (NPT) pattern. The proposed receiver is based on a non-coherent energy detection considering with motivation of low rate wireless personal area network (LR-WPAN). TOA information is estimated via proper comparison with a prescribed threshold after the sliding correlation and search back window (SBW) process for reducing TOA error. To verify the performance of proposed ranging scheme, two distinct channel models approved by IEEE 802.15.4a TG are considered. According to the simulation results, we could conclude that the proposed scheme have performed better performance than the conventional method on the existence of multiple SOPs.

• Journal of KIISE:Software and Applications
• /
• v.32 no.12
• /
• pp.1271-1282
• /
• 2005

Recently, PC-based control is incredibly developed in the industrial control field, but it is difficult for PLC programming in PC. Therefore, I need to develop the softeware PLC, which support the international PLC programming standard(IECl131-3) and can be applied to diverse control system by using C language. In this paper, I have developed the ISPLC(Intelligent Agent System based Software Programmable Logic Controller). In ISPLC system, LD programmed by a user which is used over $90\%$ among the 5 PLC languages, is converted to IL, which is one of intermediate codes, and IL is converted to the standard C rode which can be used in a commercial editor such as Visual C++. In ISPLC, the detection of logical error in high level programming(C) is more eaier than PLC programming itself The study of code conversion of LD->IL->C is firstly tried in the world as well as KOREA. I developed an execution engine with a good practical application. To show the effectiveness of the developed system, 1 applied it to a practical case, a real time traffic control(RT-TC) system. ISPLC is minimized the error debugging and programming time owing to be supported by windows application program.