• Water Engineering Research
• /
• v.4 no.2
• /
• pp.99-109
• /
• 2003

Since bed elevation changes are mainly dependent on the flow velocity and corresponding shear stress, it is possible to predict bed elevation numerically using velocity components. For the scour analysis due to channel contraction, a bed load transport model is developed and applied to estimate scour depth around coffer dam in the Mississippi River. During Phase I of the Lock & Dam No. 26 replacement project, a coffer dam was constructed to reduce the flow area approximately by 50%. Flow velocity increases due to the flow area reduction yields significant lowering (erosion) of the channel bed elevation. The proposed numerical model solves the sediment continuity equation using the finite element method to evaluate scour process in the vicinity of the coffer dam

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.7-14
• /
• 1999

어브레시브 워터젯을 이용한 Drilling시 깊이에 대한 예측은 가장 중요한 변주중의 하나다. 이 논문에서는 구멍 깊이의 예측 및 구멍 형상을 연구하기 위하여 3차원 해석 모델이 제안되었다. 해석 모델은 크게 두 가지로 구성되었다. 하나는 비선형 반복 방정식에서 생성된 입자의 운동식이며, 다른 하나는 수많은 입자에 의한 충돌시 가공능력을 규정지우는 Constitutive Equation으로 구성되었다. 이 모델은 구멍 가공이 진행됨에 따라 발생하는 감쇠 효과를 고려하였다.실험적인 고찰이 해석모델의 유용성을 검증하기 위하여 이루어졌으며, 근사한 결과를 보였다.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.5 no.1
• /
• pp.20-24
• /
• 2009

There is extensive tubing pipe in the nuclear power plant under high temperature and pressure. Erosion and corrosion defects are expected on this tubing pipe due to environmental and mechanical factors. In this study, Guided Ultrasonic Wave technique was applied to detect defects. The technique explores the advantages of the Guided Ultrasonic Wave method that inspects along the wall of the pipe and can travel long distances, providing rapid collection of data. This paper presents a case study of the Guided Ultrasonic Wave testing of 3/8" tubing pipe. This study offers to understand detected signals through correlation between amplitude and depth of defects.

• Water Engineering Research
• /
• v.6 no.3
• /
• pp.123-130
• /
• 2005

A good understanding of the interaction between flow, vegetation, and sediment is required for successful river restoration and sustainable flood management. The purpose of this paper is to provide a summary of available methods to determine flow resistance of natural rivers with vegetation, and discuss the influence of vegetation on erosion and sedimentation processes. Recently, significant advances have been made, but the effects of vegetation on flow and sediment dynamics are still not fully understood. Possible solutions to close the gaps in the current knowledge are suggested, with special focus directed to the determination of the interactive width between main channel and vegetated floodplains, the flow resistance of flexible vegetation with and without leaves, and the flow over submerged vegetation with low water depth.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.2
• /
• pp.59-64
• /
• 2014

In this study, the large scale test was performed to investigate the behavior of failure for the embankment and spillway transitional zone by overtopping. The pore water pressure, earth pressure, settlement and failure pattern of covering embankment with geotextile were compared and analyzed. The pore water pressure showed a small change in the spillway transition zone and core, indicating that the geotextile efficiently reinforced the embankment. The earth pressure decreased the infiltration of the pore water only in inclined cores type to secure local stability. The behavior of failure started from the bottom and gradually progressed upwards. After the intermediate overtopping period (100 min), width and depth of the seepage erosion were very small due to the effect of geotextile which delayed failure. Therefore, the reinforced method by geotxtile was a very effective method to respond to the emergency due to overtopping.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.118-126
• /
• 2005

Abrasive waterjet (AWJ) cutting is an emerging technology for precision cutting of difficult-to-machining materials with the distinct advantages of no thermal effect, high machinability, high flexibility and small cutting forces. This paper investigated theoretical and experimental cutting characteristics associated with abrasive waterjet cutting of quartz GE214. It is shown that the proper variations of several cutting parameters such as waterjet cutting pressure, cutting speed and cutting depth improve the roughness on workpiece surfaces produced by AWJ cutting. From the experimental results by AWJ cutting of quartz GE214, the optimal cutting conditions to improve the surface roughness and precision were proposed and discussed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.61-62
• /
• 2017

In this study, the initiation of steel corrosion was monitored due to chloride attack using embedded sensor. In general, Steel bars embedded in concrete are protected from corrosion by being forming a passive film on the surface. However, the passive film is destroyed by chemical erosion such as concrete carbonation and chloride penetration, and the rebar is exposed to the deteriorating factor and corrosion proceeds. In order to realize the initiation of steel corrosion, OCP and change of Impedance parameter were observed by using Half-cell and EIS method depending on cover depth. As result, 10mm cover showed the impedence increased in 6weeks.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.1
• /
• pp.51-59
• /
• 2021

In Korea, where 64% of the soil is mountainous, typhoons and local rains concentrated in the summer season are frequent in mountainous disasters such as landslides and debris flow. The area of study was the area where the damage to the debris flow was caused by typhoon Mitag in October 2019, and all the houses located in the downstream area were damaged. In this study, numerical simulations were conducted on the area where the damage of earth and stone flow occurred using Hyper KANAKO model that can consider erosion and sedimentation, and the applicability of the model was examined by comparing the actual damage area and the analysis results of the model. As a result of the numerical simulation, the damage area of the debris flow in the target area was 53,875 m², the maximum flow depth was 2.4 m, and the average flow depth was 1.7 m.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.6
• /
• pp.599-609
• /
• 2017

Desalination plants have been recently constructed in many parts of the world due to water scarcity caused by population growth, industrialization and climate change. Most seawater desalination plants are designed with a submarine pipeline for intake and discharge. Submarine pipelines are installed directly on the bottom of the water body if the bottom is sandy and flat. Intake is located on a low-energy shoreline with minimal exposure to beach erosion, heavy storms, typhoons, tsunamis, or strong underwater currents. Typically, HDPE (High Density Polyethylene) pipes are used in such a configuration. Submarine pipelines cause many problems when they are not properly designed; HDPE pipelines can be floated or exposed to strong currents and wind or tidal action. This study examines the optimal design method for the trench depth of pipeline, analysis of on-bottom stability and dilution of the concentrate based on the desalination plant conducted at the Pacific coast of Peru, Chilca. As a result of this study, the submarine pipeline should be trenched at least below 1.8 m. The same direction of pipeline with the main wind is a key factor to achieve economic stability. The concentrate should be discharged as much as high position to yield high dilution rate.

• Korean Journal of Agricultural Science
• /
• v.47 no.1
• /
• pp.163-171
• /
• 2020

In this study, a large laboratory model experiment was conducted with the aim of developing an embankment reinforcement method to prevent overtopping, which is the main cause for the failure of agricultural reservoirs. The model experiment was carried out with concrete and asphalt as a permanent reinforcement method and with geomembrane as the emergency method at a deteriorated homogeneous reservoir. Under the non-reinforced conditions, the pattern of the failure appeared in several scour directions from the downstream slope as the overtopping began, and the width and depth of the erosion were magnified as it gradually moved to the dam crest. Under the conditions reinforced with asphalt and concrete, the overtopping was stabilized. In the case of the concrete reinforcement, it was found that the slope of the riprap boundary exhibited downward erosion by the current; thus, it was necessary to construct an extension up to the riprap joint of the upstream and downstream sides to prevent the expansion of the failure. Under the conditions reinforced with the geomembrane sheet, the overtopping was stabilized, and no seepage was found that required the emergency reinforcement method. Asphalt, concrete, and geomembrane sheet reinforcements have been shown to be capable of delaying failure for about 1 hour and 40 minutes compared to the non-reinforcement conditions. The reinforcement method is considered to be a very effective method to prevent disasters during overtopping. The pore water pressure can be used as useful data to predict the risk of failure at an embankment.