• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.7
• /
• pp.1017-1025
• /
• 2009

This study intends to study about the blade performance loss occurred due to the variation in the shape of airfoil from the attachment/non-attachment of blade erosion shield for hovercraft. This study model has used NACA 4412, has designed NACA 4412 by using Auto CAD and designed the shape that has attached an erosion shield to this model according to the thickness and length. By using these models, we have generated a grid by using GAMBIT and calculated the lift coefficient (Cl) and drag coefficient (Cd) by using the FLUENT code for flow analysis. Through this, we have calculated and compared the lift-to-drag ratio that is an indicator of airfoil performance according to the shape and attachment/non-attachment of erosion shield.

• Journal of Engineering Education Research
• /
• v.13 no.5
• /
• pp.8-14
• /
• 2010

This study intends to study about the blade performance loss occurred due to the variation in the shape of an airfoil from attachment/non-attachment of an erosion shield for the hovercraft. The model in this study has used NACA44XXseries, has designed NACA44XX-series by using the Auto CAD, and it designed the shape that has attached an erosion shield to this model according to the thickness and length. By using these models, a grid was generated by GAMBIT and the lift coefficient ($C_l$) and the drag coefficient ($C_d$) were calculated FLUENT code for flow analysis. Through this, the $C_l$ and $C_d$ have calculated and compared the lift-to-drag ratio that an indicator of airfoil performance according to the shape and attachment/non-attachment of erosion shield.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.6
• /
• pp.95-100
• /
• 2010

Researchers developed Sediment Trap Drain Channel (STDC) as a solution of the reduction of soil erosion and muddy runoff from a alpine field. The STDC is the one that can take a role of grit chamber by installing the shield made of woods in the concrete channel. The study was conducted 8 kinds of stages according to the amount of soil loss and the inflow. Evaluation factors were ss concentration, turbidity and reduced soil. The results of study showed lessness of ss concentration and turbidity from the lower spot than the upper spot. The average reduction rate of ss concentration was 74 % and the average reduction rate of turbidity was 62 %. It was turned out that the performance related soil loss and muddy runoff of the STDC is effective. The governance was needed to expect the effectiveness of the STDC.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.1
• /
• pp.123-132
• /
• 2021

Radiological impact analyses were carried out for a near-surface radioactive waste repository at Gyeongju in South Korea. The RESRAD-ONSITE code was applied for the estimation of maximum exposure doses by considering various exposure pathways based on a land area of 2,500 ㎡ with a 0.15 m thick contamination zone. Typical influencing input parameters such as shield depth, shield materials' density, and shield erosion rate were examined for a sensitivity analysis. Then both residential farmer and industrial worker scenarios were used for the estimation of maximum exposure doses depending on exposure duration. The radiation dose evaluation results showed that 60Co, 137Cs, and 63Ni were major contributors to the total exposure dose compared with other radionuclides. Furthermore, the total exposure dose from ingestion (plant, meat, and milk) of the contaminated plants was more significant than those assessed for inhalation, with maximum values of 5.5×10-4 mSv·yr-1 for the plant ingestion. Thus the results of this study can be applied for determining near-surface radioactive waste repository conditions and providing quantitative analysis methods using RESRAD-ONSITE code for the safety assessment of disposing radioactive materials including decommissioning wastes to protect human health and the environment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.209-209
• /
• 1999

현재 magnetron sputter는 반도체, LCD 등을 포함하는 microelectronics 산업에서 박막형성을 위한 주요 장비로 널리 쓰이고 있으며, 소자의 고집적화 및 대형화 추세에 따라 그 이용가치는 더욱 증대되고 있다. 본 연구엣는 TFT-LCD용 Color Filter 제조시 ITO박막형성을 위해 사용하는 magnetron sputter 내부의 플라즈마 분포 및 ion kinetic energy에 대한 해석을 실시하였으며, ITO target의 erosion 형상의 원인을 실험결과와 비교하였다. Magnetron sputtering은 target에 가해지는 bias 전압(DC 혹은 RF)에 의해 target과 shield 혹은 target과 substrate 사이에서 생성될 수 잇는 플라즈마를 target 및 부분에 붙어있는 영구자석을 이용하여 target 근처에 집중시키고, target 표면과 플라즈마 사이의 전위차에 의해 가속된 이온들이 target 표면과 충돌하여 이차 전자방출을 일으킴과 동시에 target 표면에서 sputtering을 일으키고, 이들 sputtered 된 중성의 atom 들이 substrate로 날아가 박막을 형성하는 원리로 작동된다. 이때 target에서 방출되는 이차전자들은 영구자석에 의한 자기장 효과에 의해 target 근처에 갇히게 되어 중성 기체분자들과 이온화반응을 통해 플라즈마를 유지하고 그 밀도를 높혀주는 역할을 담당하게 된다. 즉 낮은 압력 및 bias 전압에서도 플라즈마 밀도를 높일수 있고 sputtering 공정이 가능한 장점을 가지고 있다. Magnetron sputtering 현상에 대한 시뮬레이션은 크게 magnetron discharge와 sputtering에 대한 해석 두가지로 나누어 볼 수 있는데, sputtering 현상 자체를 수치묘사할 수 있는 정량적인 모델은 아직까지 명확하게 정립되어 있지 않다. 따라서 본 연구에서는 magnetron plasma 자체에 대한 수치해석에 주안점을 두고 아울러 bulk plasma 영역에서 target으로 입사하는 이온들의 입사에너지 및 입사각도 등을 Monte Carlo 방법으로 추적하여 sputtering 현상을 유추해보았다. Sputtering 현상을 살펴보기 위해 magnetron sputter 내 플라즈마 밀도, 전자온도, 특히 target 및 substrate를 충돌하는 이온의 입사에너지 및 입사각 분포등을 계산하는데 hybrid 방법으로 시뮬레이션을 하였다. 즉 ion과 bulk electron에 대해서는 fluid 방식으로 접근하고, 이차전자 운동과 그로 인한 반응관계 및 target으로 입사하는 이온의 에너지와 입사각 분포는 Monte-Carlo 방법으로 처리하였다. 정지기장해석의 경우 상용 S/W인 Vector Fields를 사용하였다. 이를 통해 sputter 내 플라즈마 특성, target으로 입사하는 이온에너지 및 각 분포, 이들이 target erosion 형상에 미치는 영향을 살펴보았다. 또한 이들 결과로부터 간단한 sputtering 모델을 사용하여 target으로부터 sputter된 입자들이 substrate에 부착되는 현상을 Monte-Carlo 방법으로 추적하여 성막특성도 살펴보았다.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.5
• /
• pp.40-43
• /
• 2001

In order for the World cup football game to be operated stably with duplicate service electric power supply, It is done, emergency generator and the U.P.S it establishes. the electric power system power control, lighting control, integrated monitoring. rue fighting. obstruction light, the searchlight, snow melting, electric erosion shield. grounding, the lightening protection and viewable lighting, stadium floodlight and an electric bulletin board it composed of the back which it sells.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.1
• /
• pp.1-13
• /
• 2019

The accident at the Fukushima Dai-ichi Nuclear Power Plant (FDNPP) resulted in the deposition of large quantities of radionuclides over parts of eastern Japan. Radioactive contaminants have been observed over a large area including forests, cities, rivers and lakes. Due to the strong adsorption of radioactive cesium by soil particles, radioactive cesium migrates with the eroded soil, follows the surface flow paths, and is delivered downstream of population-rich regions and eventually to coastal areas. In this study, we developed a model to simulate the transport of contaminated sediment in a watershed hydrological system and this model was compared with observation data from eroded soil observation instruments located at the Korea Atomic Energy Research Institute. Two methods were applied to analyze the soil particle size distribution of the collected soil samples, including standardized sieve analysis and image analysis methods. Numerical models were developed to simulate the movement of soil along with actual rainfall considering initial saturation, rainfall infiltration, multilayer and rain splash. In the 2019 study, a numerical model will be used to add rainfall shield effect by trees, evaporation effect and shield effects of surface water. An eroded soil observation instrument has been installed near the Wolsong nuclear power plant since 2018 and observation data are being continuously collected. Based on these observations data, we will develop the numerical model to analyze long-term behavior of radionuclides on land as they move from land to rivers, lakes and coastal areas.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1964-1969
• /
• 2010

Recently, as construction market scale is getting bigger and transportation industry is developing, the underground structure construction such as subway, tunnel (excavation box) or shield tunnel structure is becoming more diverse, and its demand is gradually increasing. However, for the concrete structures constructed underground, the water leakage is occurred due to the expansion joint and construction joint, or movement, uneven settlement, excessive load and vibration during application causing cracks. Many waterproofing method and materials are used in jobsites, but areas such as underground railroad and subway that has movement and vibration at all times, the ability of waterproofing layer is declined causing repetitive water leakage due to crack, erosion and separation, which is a vicious cycle. Therefore, this study evaluates the responsiveness to a movement for adhesive/flexible waterproofing material that can cope with the vibration and the movement of the structure. Also to recommend a waterproofing technology that can cope with structure movement through examples of actual jobsite applications such as subway and tunnel where there are constant movement and vibration.

• Journal of Welding and Joining
• /
• v.28 no.1
• /
• pp.66-71
• /
• 2010

With large specific strength and outstanding corrosion resistance and erosion resistance in sea water, titanium and titanium alloy are widely used in heat exchanger production. In particular, pure titanium demonstrates outstanding molding performance and may be considered optimal for production of heat exchanger. Since titanium is very vulnerable to oxidation and embrittlement during welding, processes with less heat input are widely used, and laser welding is widely applied by considering production performance and shield etc in atmosphere. So far, 1st report and 2nd report compared and analyzed embrittlement degrees by bead colors of weldment through oxygen and nitrogen quantitative analysis and hardness measurement, and evaluated welding performance and mechanical properties of butt welding. This study evaluated field applicability of lap welding to heat exchange plate of LPG re-liquefaction device for ships through tensile stress test, hardness test and internal pressure test etc after deducing optimal weding condition and applying to actual heat exchange plate. In bead overlap area, the experiment produced sound welds with no porosity or defect by increasing and decreasing laser power, and tensile-shear test results indicated virtually the same tension and yield strength as base metal. As a result of measuring hardness at lateral cross section and bead overlap zone of actual heat exchanger welds, hardness difference within 20Hv was produced at base metal, HAZ and weldment, and as a result of pneumatic and hydraulic pressure test, no leakage occurred.

• Journal of Korea Water Resources Association
• /
• v.55 no.10
• /
• pp.801-810
• /
• 2022

This study investigates the evolution processes of alternate bars in the channel with bank stability by vegetation by laboratory experiment. Laboratory experiments are conducted to elucidate the behavior of alternate bars by the influence of riparian vegetation on the rivers with erodible banks. To control bank stability of the channel, the actual vegetation, alfalfa, is grown by adjusting the density of alfalfa on the flood plain. As the vegetation density increases in the flood plain, the bank erosion rates and the channel widening rates decrease and the bank stability increases. The alternate bars migrate slow downstream over time. Moreover, the bars in a channel with strong banks migrate rapidly, which is related with the aspect ratio, that is, width to depth ratio. The bar wavelength decrease with vegetation density. Our laboratory experiments show that the behavior of bars differ according to bank strength.