• Science of Emotion and Sensibility
• /
• v.21 no.1
• /
• pp.3-16
• /
• 2018

The emergence of the fourth industrial revolution is rapidly changing the conventional society and the industry, eroding the boundaries among the technology, culture, and finance. In the mobility industry, as the engineering-based industry converges with the information technology, the mobile space is changing from mobility or safety-centric space into space where the passengers can consume infotainment or contents services. The contents evaluation of the future mobility is conducted in terms of usability or technology acceptance aspect, but according to the trend analysis, the mobility industries, such as vehicle OEMs, it is necessary to evaluate the emotional or sensibility factors for the development of their future mobile space design. Herein, this research study evaluates which sensibility factor should be evaluated in priority to develop the contents interaction in the future mobile space. Thus, using Patrick Jordan's Four Pleasure Model, the priority evaluation has been conducted among 116 Korean drivers. As a result of the statistical analysis and AHP (Analytic Hierarchy Process), it has been found that first, it is necessary to evaluate psychological, ideological, social and physical sensibility in the respective order, and second, it is necessary to evaluate based on the contents user type.

• Journal of Yeungnam Medical Science
• /
• v.7 no.2
• /
• pp.197-202
• /
• 1990

Mechanical obstruction of the common hepatic duct includes the following causes ; choledocholithiasis, sclerosis, cholangitis, pancreatic carcinoma, cholangiocarcinoma, postoperative stricture, primary hepatic duct carcinoma, enlarged cystic duct lymph nodes, and metastatic nodal involvement of the porta hepatis. Partial mechanical obstruction of the common hepatic duct caused by impaction of stones and inflammation surrounding the vicinity of the neck of the gallbladder had been reported on the "syndrome del conducto hepatico" in 1948 by Mirizzi. Nowadays, this disease was named by Mirizzi syndrome. Mirizzi syndrome is a rare entity of common hepatic duct obstruction that results from an inflammatory response secondary to a gallstone impacted in the cystic duct or neck of the gallbladder. It results from an almost parallel course and low insertion of the cystic duct into the common hepatic duct. In a varient of Mirizzi's syndrome, the cause of the common hepatic duct obstruction was a primary cystic duct carcinoma rather than gallstone disease. A 71-year-old man was admitted with a four-day history of right upper quadrant abdominal pain. Past medical history was unremarkable. On physical examination, the patient had a temperature of $38^{\circ}C$, icteric sclera and right upper quadrant tenderness. Pertinent laboratory findings included WBC 18,000/$cm^2$;albumin 2.6g/dl(normal 3.9-5.1) ; SGOT 183u/L(normal 0-50) ; SGPT167u/L(normal 0-65) ; bilirubin, 8.2mg/dl(normal 0-1) with the direct bilirubin, 4.4mg/dl(normal 0-0.4). Ultrasonography revealed a dilated extrahepatic biliary tree. ERCP showed that the superior margin was angular and more consistent with a calculus causing partial CHD obstruction(Mirizzi syndrome). At surgery a diseased gallbladder containing calculi was found. In addition, there was two calculi partially eroding through the proximal portion of the cystic duct and compressing the common hepatic duct. A cholecystectomy and excision of common bile duct was performed, with Roux-en-Y hepaticojejunostomy. The postoperative course was uneventful.

• Clinical and Experimental Reproductive Medicine
• /
• v.37 no.3
• /
• pp.181-189
• /
• 2010

The placenta, which is a temporary organ derived from the fetus during pregnancy, is critical to support fetus development via optimal regulation between mother and fetus. Trophoblast as a major cell population of the placenta is one of the earliest to differentiate and shows an extensive proliferation or/and differentiation up to the formation of the placenta. The role of the trophoblast show dynamic changes from early embryo implantation to placentation during pregnancy. Implantation of the blastocyst into the endometrium of the maternal uterus is mediated by invasion of the differentiated trophoblast (e.g. syncytiotrophoblast) from the trophectoderm. During pregnancy, the unique role of the trophoblast is to invasion, eroding, and metastasizing in the placenta as well as to ensure appropriate bidirectional nutrient or waste flow required for growth and maturation of the embryo. The dysfunction of the trophoblast during pregnancy can result in several gynecological diseases including preeclampsia and congenital malformation in neonatal medicine. Therefore, trophoblasts act as a conclusive factor in placental and fetal development. This brief review outlines the classification of trophoblast and its function in the placenta during pregnancy. Also, we introduce the latest research in trophoblast for implantation and the placenta development, and the application potential of trophoblast for infertility and obstetrical diseases.

• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.359-366
• /
• 2022

While the Forward Freight Agreement (FFA) has emerged as an effective hedging tool since early 1990, the basis risk and cash flow distortions have been addressed as obstacles to the active use of FFAs. This research analyses the basis risk of FFAs and provides a feasible suggestion to reduce it. Basis risk is divided into timing basis, route basis, size basis, and low liquidity basis. The timing basis is defined as the difference between the physical hire, fixed on the specific contract date and the FFA settlement price, calculated by averaging spot rates for a certain period. Timing basis is considered the worst in eroding the effectiveness of FFAs. This paper suggests a change of hire payment criterion from contract date to 15-day moving average, as a means of mitigating the basis risk, and analyzed the effectiveness through historical simulation. The result revealed that the change is effective in mitigating the timing basis. This study delivers a meaningful implication to shipping practice in that the change of hire payment criterion mitigates the basis risk and eventually activates the use of FFAs in the future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.237-237
• /
• 2015

The district of Marlborough has had more than its share of river management projects over the past 150 years, each one uniquely affecting the geomorphology and flood hazard of the Wairau Plains. A major early project was to block the Opawa distributary channel at Conders Bend. The Opawa distributary channel took a third and more of Wairau River floodwaters and was a major increasing threat to Blenheim. The blocking of the Opawa required the Wairau and Lower Wairau rivers to carry greater flood flows more often. Consequently the Lower Wairau River was breaking out of its stopbanks approximately every seven years. The idea of diverting flood waters at Tuamarina by providing a direct diversion to the sea through the beach ridges was conceptualised back around the 1920s however, limits on resources and machinery meant the mission of excavating this diversion didn't become feasible until the 1960s. In 1964 a 10 m wide pilot channel was cut from the sea to Tuamarina with an initial capacity of $700m^3/s$. It was expected that floods would eventually scour this 'Wairau Diversion' to its design channel width of 150 m. This did take many more years than initially thought but after approximately 50 years with a little mechanical assistance the Wairau Diversion reached an adequate capacity. Using the power of the river to erode the channel out to its design width and depth was a brilliant idea that saved many thousands of dollars in construction costs and it is somewhat ironic that it is that very same concept that is now being used to deal with the aggradation problem that the Wairau Diversion has caused. The introduction of the Wairau Diversion did provide some flood relief to the lower reaches of the river but unfortunately as the Diversion channel was eroding and enlarging the Lower Wairau River was aggrading and reducing in capacity due to its inability to pass its sediment load with reduced flood flows. It is estimated that approximately $2,000,000m^3$ of sediment was deposited on the bed of the Lower Wairau River in the time between the Diversion's introduction in 1964 and 2010, raising the Lower Wairau's bed upwards of 1.5m in some locations. A numerical morphological model (MIKE-11 ST) was used to assess a number of options which led to the decision and resource consent to construct an erodible (fuse plug) bank at the head of the Wairau Diversion to divert more frequent scouring-flows ($+400m^3/s$)down the Lower Wairau River. Full control gates were ruled out on the grounds of expense. The initial construction of the erodible bank followed in late 2009 with the bank's level at the fuse location set to overtop and begin washing out at a combined Wairau flow of $1,400m^3/s$ which avoids berm flooding in the Lower Wairau. In the three years since the erodible bank was first constructed the Wairau River has sustained 14 events with recorded flows at Tuamarina above $1,000m^3/s$ and three of events in excess of $2,500m^3/s$. These freshes and floods have resulted in washout and rebuild of the erodible bank eight times with a combined rebuild expenditure of $80,000. Marlborough District Council's Rivers & Drainage Department maintains a regular monitoring program for the bed of the Lower Wairau River, which consists of recurrently surveying a series of standard cross sections and estimating the mean bed level (MBL) at each section as well as an overall MBL change over time. A survey was carried out just prior to the installation of the erodible bank and another survey was carried out earlier this year. The results from this latest survey show for the first time since construction of the Wairau Diversion the Lower Wairau River is enlarging. It is estimated that the entire bed of the Lower Wairau has eroded down by an overall average of 60 mm since the introduction of the erodible bank which equates to a total volume of $260,000m^3$. At a cost of $$0.30/m^3$ this represents excellent value compared to mechanical dredging which would likely be in excess of $$10/m^3$. This confirms that the idea of using the river to enlarge the channel is again working for the Wairau River system and that in time nature's "excavator" will provide a channel capacity that will continue to meet design requirements.

• Journal of Distribution Research
• /
• v.16 no.4
• /
• pp.1-27
• /
• 2011

Introduction: Sales of private labels(PU have been growing m recent years. Globally, PLs have already achieved 20% share, although between 25 and 50% share in most of the European markets(AC. Nielson, 2005). These products are aimed to have comparable quality and prices as national brand(NB) products and have been continuously eroding manufacturer's national brand market share. Stores have also started introducing premium PLs that are of higher-quality and more reasonably priced compared to NBs. Worldwide, many retailers already have a multiple-tier private label architecture. Consumers as a consequence are now able to have a more diverse brand choice in store than ever before. Since premium PLs are priced higher than regular PLs and even, in some cases, above NBs, stores can expect to generate higher profits. Brand extensions and private label have been extensively studied in the marketing field. However, less attention has been paid to the private label extension. Therefore, this research focuses on private label extension using the Multi-Attribute Attitude Model(Fishbein and Ajzen, 1975). Especially there are few studies that consider the hierarchical effect of the PL's two parent brands: store brand and the original PL. We assume that the attitude toward each of the two parent brands affects the attitude towards the extended PL. The influence from each parent brand toward extended PL will vary according to the perceived fit between each parent brand and the extended PL. This research focuses on how these two parent brands act as reference points to one another in the consumers' choice consideration. Specifically we seek to understand how store image and attitude towards original PL affect consumer perceptions of extended premium PL. How consumers perceive extended premium PLs could provide strategic suggestions for retailer managers with specific suggestions on whether it is more effective: to position extended premium PL similarly or dissimilarly to original PL especially on the quality dimension and congruency with store image. There is an extensive body of research on branding and brand extensions (e.g. Aaker and Keller, 1990) and more recently on PLs(e.g. Kumar and Steenkamp, 2007). However there are no studies to date that look at the upgrading and influence of original PLs and attitude towards store on the premium PL extension. This research wishes to make a contribution to this gap using the perceived fit difference between parent brands and extended premium PL as the context. In order to meet the above objectives, we investigate which factors heighten consumers' positive attitude toward premium PL extension. Research Model and Hypotheses: When considering the attitude towards the premium PL extension, we expect four factors to have an influence: attitude towards store; attitude towards original PL; perceived congruity between the store image and the premium PL; perceived similarity between the original PL and the premium PL. We expect that all these factors have an influence on consumer attitude towards premium PL extension. Figure 1 gives the research model and hypotheses. Method: Data were collected by an intercept survey conducted on consumers at discount stores. 403 survey responses were attained (total 59.8% female, across all age ranges). Respondents were asked to respond to a series of Questions measured on 7 point likert-type scales. The survey consisted of Questions that measured: the trust towards store and the original PL; the satisfaction towards store and the original PL; the attitudes towards store, the original PL, and the extended premium PL; the perceived similarity of the original PL and the extended premium PL; the perceived congruity between the store image and the extended premium PL. Product images with specific explanations of the features of premium PL, regular PL and NB we reused as the stimuli for the Question response. We developed scales to measure the research constructs. Cronbach's alphaw as measured each construct with the reliability for all constructs exceeding the .70 standard(Nunnally, 1978). Results: To test the hypotheses, path analysis was conducted using LISREL 8.30. The path analysis for verification of the model produced satisfactory results. The validity index shows acceptable results(${\chi}^2=427.00$(P=0.00), GFI= .90, AGFI= .87, NFI= .91, RMSEA= .062, RMR= .047). With the increasing retailer use of premium PLBs, the intention of this research was to examine how consumers use original PL and store image as reference points as to the attitude towards premium PL extension. Results(see table 1 & 2) show that the attitude of each parent brand (attitudes toward store and original pL) influences the attitude towards extended PL and their perceived fit moderates these influences. Attitude toward the extended PL was influenced by the relative level of perceived fit. Discussion of results and future direction: These results suggest that the future strategy for the PL extension needs to consider that positive parent brand attitude is more strongly associated with the attitude toward PL extensions. Specifically, to improve attitude towards PL extension, building and maintaining positive attitude towards original PL is necessary. Positioning premium PL congruently to store image is also important for positive attitude. In order to improve this research, the following alternatives should also be considered. To improve the research model's predictive power, more diverse products should be included in study. Other attributes of product should also be included such as design, brand name since we only considered trust and satisfaction as factors to build consumer attitudes.