• Journal of Preventive Medicine and Public Health
• /
• 제22권2호
• /
• pp.189-196
• /
• 1989

In January 1988, district medical insurance plan was executed on a national scale in Korea. We conducted an evaluation of the impact of execution of district medical insurance plan on number of hospital patients: number of outpatients; and occupancy rate. This study was carried out by Box-Jenkins time series analysis. We tested the statistical significance with intervention component added to ARIMA model. Results of our time series analysis showed that district medical insurance plan had a significant effect on the number of outpatients and occupancy rate. Due to this plan the number of outpatients had increased by 925 patients every month which is equivalent to 8.3 percents of average monthly insurance outpatients in 1987, and occupancy rate had also increased by 0.12 which is equivalent to 16 percents of that in 1987.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.92-94
• /
• 2007

This paper considers an optimal control problem for a remote control to an electrical drive system with a DC motor. Since it is a linear control system with time-delay subject to unknown but bounded disturbance, we construct a worst-case feedback control policy. This policy can guarantee that, for all admissible uncertain disturbances, the real system state should be in a prescribed neighborhood of a desired value, and the cost functional takes the best guarantee value. The worst-case feedback control policy is allowed to be corrected at one correction point between the initial to the final time, which is equivalent to solving a 1-level min-max problem. Since the min-max problem at the stage does not yield a simple analytical solution, we consider an approximate control policy, which is equivalent and can be solved explicitly m the numerical experiments.

• 한국철도학회논문집
• /
• 제2권3호
• /
• pp.26-35
• /
• 1999

The acoustic power reduction method can be used to design a quiet structure. To calculate the acoustic power radiated from a vibrating structure, the dynamic responses have to be determined. It is not easy to analyse the structure composed of the corrugated panels because of the structural complexity and the long analysing time. To make up for these defects, the equivalent orthotropic panel is presented. Also the acoustic power prediction method of the vibrating structures is proposed. As examples, the equivalent material properties of the corrugated plates are obtained and the acoustic powers of the floor structure are calculated at several frequency regions for the Korean High Speed Train.

• Journal of applied mathematics & informatics
• /
• 제13권1_2호
• /
• pp.117-123
• /
• 2003

For an n ${\times}$ n real matrix X, let ${\Phi}$(X) = X o (X$\^$-1/)$\^$T/, where o stands for the Hadamard (entrywise) product. Suppose A, B, G and D are n ${\times}$ n real nonsingular matrices, and among them there are at least one solutions to the equation (equation omitted). An equivalent condition which enable (equation omitted) become a real solution ot the equation (equation omitted), is given. As application, we get new real solutions to the matrix equation (equation omitted) by applying the results of Zhang. Yang and Cao [SIAM.J.Matrix Anal.Appl, 21(1999), pp: 642-645] and Chen [SIAM.J.Matrix Anal.Appl, 22(2001), pp:965-970]. At the same time, all solutions of the matrix equation (equation omitted) are also given.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.437-444
• /
• 2005

An equivalent linearization technique based on Rayleigh peak distribution for friction damper and brace system (FDBS) under stochastic excitation is proposed. For verification, shaking table test of a small scale 3-story building model with the FDBS is conducted for various slip moment levels. Using experimental result, equivalent linearization of the FDBS is conducted based on Rayleigh peak distribution, which is compared with measured peak distribution. For comparative study, model updating technique is applied based on identified modal properties. Finally, complex modal analysis and time history analysis for the obtained equivalent linear systems are conducted and compared with experimental result.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.130-136
• /
• 2013

This paper presents the magnetic equivalent circuit analysis of a double-excited, two-degree-of-freedom (DOF) motor. The double-excited, 2-DOF motor is a laminated structure, making it easy to manufacture and giving it simple operating principles. We explain the structure of the 2-DOF motor and analyze the static characteristics using a magnetic equivalent circuit (MEC) to reduce analysis time. The feasibility of MEC analysis was confirmed by experimental results of the tilting, panning motion. We also confirmed the occurrence of holding torque in every motion.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.135-142
• /
• 2002

Input shaping is a method for reducing residual vibration in computer controlled machines. Vibration is eliminated by convolving a sequence of impulses, an input shaper, with a desired system command to produce a shaped input. This paper shows the shape of sensitivity curve of input shaper as impulse interval T and analysis of robustness for input shaper on the z-plane. And a method is presented for designing equivalent input shaper considering sampling time $T_s$. And then we applied equivalent input shaper to crane system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.96-98
• /
• 2001

In this paper, the equivalent magnetic circuit and FEM are used to calculate force density of linear BLDC motor. The equivalent magnetic circuit is hard to exact compose for analysis model and it is just applied to linear system. To flexible design and reducing the calculated and analyzed time, magnetic circuit has to be used for designing the linear BLDC motor and deducing equation of force density. Force density as parameter of permanent magnet and coil-side width that are important to determined force density can be estimated using equation of force density. FEM is used to prove reliability of equation of force density and to consider the nonlinear system. Equivalent magnetic circuit and result of FEM are similar, but it is little different by friction loss at the experiment.

• 한국안전학회지
• /
• 제33권4호
• /
• pp.78-83
• /
• 2018

Previous researches on the analysis of algae concentration were restricted to applying single-valued decay coefficient during simulation period, and the accuracy as well as the applicability were severely challenged. In this study, an equivalent tracking method of decay coefficient was proposed by introducing the time-series decay coefficients and restart option. Dye module in EFDC model was employed to route the temporal variation of Chl-a concentration. It was shown that the simulation results can be significantly improved up to 46% when the equivalent tracking method was activated.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권3호
• /
• pp.123-130
• /
• 2006

This paper presents characteristics analysis of skewed Synchronous Reluctance Motor using equivalent magnetic circuit and compares with the result of Finite Element Method. Torque ripple must be reduced, because it is producing noise and vibration. There is many kinds of method to reduce torque ripple, but generally we apply skewing stator or rotor. The 2D Finite Element Method(FEM) or 3D FEM is used to analyze the motor, since skew influence the average torque in the motor. However, the FEM takes much time in spite of the advanced computer and numerical technique. This paper will analyze characteristics of skewed synchronous reluctance motor using equivalent magnetic circuit.