• 제목/요약/키워드: Equivalent Air Density

검색결과 41건 처리시간 0.028초

Conceptual Design of Passive Containment Cooling System for Concrete Containment

  • Lee, Seong-Wook;Baek, Won-Pil;Chang, Soon-Heung
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1995년도 추계학술발표회논문집(1)
    • /
    • pp.358-363
    • /
    • 1995
  • A study on passive cooling systems for concrete containment of advanced pressurized water reactors has been performed. The proposed passive containment cooling system (PCCS) consist of (1) condenser units located inside containment, (2) a steam condensing pool outside containment at higher elevation, and (3) downcommer/riser piping systems which provide coolant flow paths. During an accident causing high containment pressure and temperature, the steam/air mixture in containment is condensed on the outer surface of condenser tubes transferring the heat to coolant flowing inside tubes. The coolant transfers the heat to the steam condensing pool via natural circulation due to density difference. This PCCS has the following characteristic: (1) applicable to concrete containment system, (2) no limitation in plant capacity expansion, (3) efficient steam condensing mechanism (dropwise or film condensation at the surface of condenser tube), and (4) utilization of a fully passive mechanism. A preliminary conceptual design work has been done based on steady-state assumptions to determine important design parameter including the elevation of components and required heat transfer area of the condenser tube. Assuming a decay power level of 2%, the required heat transfer area for 1,000MWe plant is assessed to be about 2,000 ㎡ (equivalent to 1,600 of 10 m-long, 4-cm-OD tubes) with the relative elevation difference of 38 m between the condenser and steam condensing pool and the riser diameter of 0.62 m.

  • PDF

3차원 유한요소법을 이용한 축방향 자속형 브러시리스 DC 전동기 최적 설계 (Optimal Design of Axial Type Brushless DC Motor Using 3-D FEM)

  • 홍선기
    • 조명전기설비학회논문지
    • /
    • 제19권1호
    • /
    • pp.143-147
    • /
    • 2005
  • 본 연구에서는 희토류 자석편을 이용한 이중 회전자를 갖는 축방향 자속형 브러시리스 DC 전동기를 설계한다. 이러한 종류의 전동기는 반경방향 자속형에 비해 축방향 길이가 짧고 조립이 용이한 장점이 있다. 충분한 토크를 얻기 위해서 NdFeB 자석이 이용되며 생산 비용을 고려하여 자석은 세그먼트로 만들어 진다. 이 전동기를 설계하기 위해 자기 등가회로 모델이 이용되었고, 정확한 파라미터를 얻기 위해 3차원 유한요소법을 이용하여 공극 자속밀도를 구하였다. 최적화된 설계 변수들은 유전 알고리즘을 이용하여 구하였다. 시뮬레이션결과로부터 자석에 따른 설계의 지침과 타당성을 확인하였다.

대공화기 탄자비행시간 계산 기법 (A Computation Method for Time of Flight in the Anti-Aircraft Gun Fire Control System)

  • 김재훈;김의환;유석진;김성호
    • 정보처리학회논문지:컴퓨터 및 통신 시스템
    • /
    • 제4권11호
    • /
    • pp.361-368
    • /
    • 2015
  • 대공화기사격통제장치에서 유효사거리는 정지한 표적에 대해 충분한 파괴력을 가질 수 있도록 탄속이 음속 이상을 유지하는 거리로 정의되고 있다. 접근하는 표적은 탄과 표적 간 상대속도가 증가하므로 실질적인 교전 사거리는 위의 유효사거리보다 더욱 연장된다. 그러나 기존에 제시된 TOF 계산식은 유효사거리 내에서만 정확하고 유효사거리를 벗어나면 정확하지 못하다. 본 논문은 교전사거리를 보장할 수 있도록 유효사거리 내에서와 유효사거리 밖에서도 충분한 정확도를 가진 실시간 처리가 가능한 탄자비행시간 계산 기법을 제시한다. 시뮬레이션을 통해 30미리 대공 탄에 대한 본 논문의 유용성을 보인다.

소형 오존발생장치의 전력제어와 냉각효과에 관한 연구 (A Study on Cooling Effect and Power Control of a Mini Ozonizer)

  • 우성훈;박승조;윤성윤;박지호;우정인
    • 대한환경공학회지
    • /
    • 제28권1호
    • /
    • pp.97-103
    • /
    • 2006
  • 본 논문은 미세 오존 출력을 얻을 수 있는 자동제어형 오존발생장치의 제어기법을 제시하고, 또한 무성방전에 의한 오존발생장치의 유입공기를 공극에서 저온인 $2^{\circ}C$까지 냉각 하여 포화 확산도가 높은 고밀도 탈취용 오존을 발생시킬 수 있는 기법을 제시한다. 고주파수의 오존방전 노이즈에 의한 전원파형의 불량화를 보상하기 위해서 디지털 궤환 제어시스템을 구성하고, 방전관의 등가 커패시터의 전압과 전류를 검출하여 2중의 제어루프를 설계한다. 부하변동에 따르는 과도상태 응답특성을 개선하고 제어기의 연산 지연시간을 보상하기 위하여 연산시간을 전원장치 플랜트의 고유한 파라미터로 가정하여 플랜트모델에 포함시켜 모델링한다. 제안된 오존 발생기는 고농도 고효율의 오존방전 시스템의 입력전원에서 고주파방전노이즈가 제거되어 정현적으로 되며 2배 이상의 안정된 오존출력을 얻는 것을 실험적으로 입증한다.

Application of Field and Laboratory Emission Cell (FLEC) to Determine Formaldehyde and VOCs Emissions from Wood-Based Composites

  • Kim, Sumin;Kim, Jin-A;Kim, Hyun-Joong
    • Journal of the Korean Wood Science and Technology
    • /
    • 제35권5호
    • /
    • pp.24-37
    • /
    • 2007
  • The Korean Ministry of Environment started controlling indoor air quality (IAQ) in 2004 through the introduction of a law regulating the use of pollutant emitting building materials. The use of materials with formaldehyde emission levels above $1.25 mg/m^2{\cdot}h$ (JIS A 1901, small chamber method) has been prohibited. This level is equivalent to the $E_2$ grade ($>5.0mg/{\ell}$) of the desiccator method (JIS A 1460). However, the $20{\ell}$ small chamber method requires a 7-day test time to obtain the formaldehyde and volatile organic compound (VOC) emission results from solid building interior materials. As a approach to significantly reduce the test time, the field and laboratory emission cell (FLEC) has been proposed in Europe with a total test time less than one hour. This paper assesses the reproducibility of testing formaldehyde and TVOC emissions from wood-based composites such as medium density fiberboard (MDF), laminate flooring, and engineered flooring using three methods: desiccator, perforator and FLEC. According to the desiccator and perforator standards, the formaldehyde emission level of each flooring was ${\le}E_1$ grade. The formaldehyde emission of MDF was $3.48 mg/{\ell}$ by the desiccator method and 8.57 g/100 g by the perforator method. To determine the formaldehyde emission, the peak areas of each wood-based composite were calculated from aldehyde chromatograms obtained using the FLEC method. Formaldehyde, acetaldehyde, propionaldehyde, butyraldehyde and benzaldehyde were detected as aldehyde compounds. The experimental results indicated that MDF emitted chloroform, benzene, trichloroethylene, toluene, ethylbenzene, m,p-xy-lene, styrene, and o-xylene. MDF emitted significantly greater amounts of VOCs than the floorings did.

LCD 제조공정 클린룸의 화재시 CFD를 이용한 제연성능 개선대책에 관한 연구 (A Study on Measures to Improve Smoke Control Performance in Case of Fire in a Clean room as an LCD Manufacturing Process)

  • 손봉세;장찬희
    • 한국화재소방학회논문지
    • /
    • 제26권5호
    • /
    • pp.41-47
    • /
    • 2012
  • 첨단산업기술인 반도체, LCD 등 제조의 핵심공정인 클린룸은 생산제품의 성능 및 품질에 절대적인 영향을 미치는 가장 중요한 공정이다. 그러나 국내는 방화공학적인 측면에서 과학적이고 종합안전대책에 대한 체계적인 연구가 제대로 이루어지지 않고 있다. 본 연구는 LCD 제조공정 클린룸에 설치하는 제연시스템의 성능 및 문제점을 파악하여 이에 대한 개선방안을 도출하기 위하여 여러 시나리오를 고려한 화재시뮬레이션과 피난시뮬레이션을 통하여 분석하였다. LCD 제조공정의 클린룸 화재 및 연기확산에 대하여 분석한 결과 화재시 공조기의 연동정지는 반드시 필요하며 연기의 부력을 고려하여 FAB 상부에 배연을 할 수 있도록 하여야 한다. 또한 대규모 클린룸의 경우 화재특성상 스프링클러헤드의 집열 성능이 떨어지므로, 조기반응형 헤드의 설치 및 작동시간을 빠르게 하기 위한 보조장치를 설치하여야 한다. 특히, 대공간 클린룸은 자동화 공정으로 거주밀도가 낮지만, 복잡한 생산장비의 배치와 방진복을 착용하고 근무해야하는 환경특성 때문에 화재시 피난안전성능 확보가 어렵기 때문에 공정 내 위험요소의 철저한 관리 및 주기적인 교육과 훈련이 필요하며, 방재선진국의 기준에 준하는 수준의 국내 관련기술 기준을 정립할 필요가 있다.

자동차 연비향상을 위한 복합재료 적용 타당성에 관한 연구 (Study on the Suitability of Composite Materials for Enhancement of Automotive Fuel Economy)

  • 주연진;권영철;최흥섭
    • Composites Research
    • /
    • 제32권5호
    • /
    • pp.284-289
    • /
    • 2019
  • 본 논문에서는 KIA K3 (1.6) 가솔린 자동차의 연비(km/liter)식을 동력학적 힘-모멘트 평형 방정식, 구동력 및 에너지 방정식을 구성하고 분석하여 유도하였다. 이를 통해 차량의 속도(V), 자동차 총 중량(M), 타이어-노면의 롤링저항계수($C_r$), 도로 경사각(${\theta}$)과 항력계수($C_d$), 차량의 횡단면적(A)과 같은 공기역학적 매개변수가 자동차의 연비에 미치는 영향을 분석하였다. 또한 경량금속합금, 섬유강화 플라스틱 복합재료와 같은 대체재료가 기존 자동차의 강재, 주철재를 대체하여 차량의 무게를 줄일 수 있는 가능성 등을 Ashby의 재료지수 방법으로 조사하였다. 본 연구를 통해 다음과 같은 결과를 얻었다. 고속(100km/h)에서 연비에 가장 큰 영향을 미친 매개변수는 그 크기순으로 자동차의 속도 V와 공기역학적 매개변수인 $C_d$, A, ${\rho}$ 및 동력학적 매개변수인 $C_r$, M의 순서로 조사되었다. 반면에 저속(60 km/h)에서는 동력학적 매개변수로는 V, M, $C_r$의 순서로, 공기역학적 매개변수로는 $C_d$, A, ${\rho}$ 순으로 영향을 미침을 확인하였다.

X-ray 저선량 피폭방지를 위한 기능성 차폐크림의 방어 효과 검증 (Verification of the Protective Effect of Functional Shielding Cream for the Prevention of X-ray Low-dose Exposure)

  • 김선칠
    • 한국방사선학회논문지
    • /
    • 제17권4호
    • /
    • pp.497-506
    • /
    • 2023
  • 의료기관의 방사선 업무 종사자의 경우 환자 보호와 정확한 시술을 위해 방사선 노출이 이루어져 저선량 피폭의 문제점을 안고 있다. 저선량 방사선 피폭은 주로 Apron 영역 이외에 신체 부분에서 발생되며, 가장 많은 곳이 손 등 피부이다. 특히, 의료인의 손은 시술 중 감각과 미세한 동작을 필요로 하기에 방사선 노출영역에서는 무방비 상태로 피폭의 위험성을 안고 있다. 납장갑 등 차폐체로 문제를 해결할 수 있지만, 이는 시술 중 손의 활동성을 제안하여 사용상의 어려움이 있다. 이러한 문제점을 해결하고자 기능성 방사선 보호효과를 얻을 수 있는 차폐크림을 개발하여 납당량 0.1 mmPb와 차폐성능을 비교하였다. 차폐크림 제조과정에서 크림의 밀도를 높이기 위해 기공을 줄이는 탈포과정을 추가하여 차폐성능을 개선하였다. 따라서 황산바륨을 주 재료로 사용한 차폐크림은 납 plate보다 차폐율이 낮은 실효에너지 영역에서는 59%, 높은 실효에너지에서는 37% 정도의 차이는 보여 기능성 방사선 방어효과가 있는 것으로 나타났다. 따라서 피부에 직접 사용할 수 있는 장점으로 상시 방어효과와 수술용 장갑 착용전에 사용이 가능한 것으로 사료된다.

자궁강내 근접방사선조사시 인체조직등가 팬톰을 이용한 방사선량 측정 (Measurement of Radiation Using Tissue Equivalent Phantom in ICR Treatment)

  • 장홍석;서태석;윤세철;유미령;박용휘;신경섭
    • Journal of Radiation Protection and Research
    • /
    • 제20권1호
    • /
    • pp.45-52
    • /
    • 1995
  • 자궁경부암환자에서 자궁강내 근접 방사선조사시 선원 배열에 따른 선량분포와 임상적으로 중요한 표식점인 A 및 B점 선량값에 대한 정확성을 평가하기 위하여 조직등가 팬톰을 제작하고 필름선량계측법을 적용하여 측정한 후, 이를 along-away에 의한 계산과 전산화치료계획장치에 의한 값과 비교 분석하였다. 대상 및 방법 : 자궁강내 근접 방사선조사시 치료상태를 그대로 묘사할 수 있게 아크릴과 물을 이용하여, 인체조직등가 팬톰을 제작한 후 자궁경부암의 자궁강내 근접 방사선조사를 시행하는 것과 똑같이 Fletcher-Suit-Delclos applicator 를 삽입하였다. Tandem 에 $15.7mg\;Ra-eq$의 방사능을 가진 $^{137}Cs$ tube를 2cm 간격으로 3개 주입한 후, A점에 해당되는 단면에 수직방향과 평행방향으로 각각 필름을 팬톰 간극에 삽입하였고, 또한 팬톰표면의 방사선량분포측정을 위하여 팬톰표면을 필름으로 감싸서, 1시간 조사하였다. 필름에 현상된 음영을 필름농도계를 이용하여 농도분포를 측정하여, A점에 대한 방사선량을 환산하였고, 전체적인 선량분포도를 얻었다. 이러한 측정값과 전산화치료계획장치를 이용하여 얻은 A점 값, along-away 표에 의한 A점 선량을 비교하였고, 필름에 의한 선량분포와 컴퓨터에 의한 선량분포를 서로 비교하였다. 결과 : A점에 대한 필름 측정치는 시간당 51.2cGy였고, 전산화치료계획장치에 의한 계산값은 시간당 46.7cGy, along-away 표에 의한 값은 시간당 47.9 cGy여서 약 10% 이내로 비교적 일치하였다. 필름을 계측하여 얻은 선량분포와 전산화치료계획장치의 계산에 의한 선량분포는 비슷한 모습을 보여 주었다. 결른 : 본 연구에서 아크릴과 물을 이용하여, 간단하고 경제적인 방법으로 인체조직등가팬톰을 제작할 수 있었고, 이러한 간단한 팬톰을 이용하여 비교적 효과적으로 자궁강내 근접 방사선조사시 사용하는 밀봉선원인 $^{137}Cs$ tube 의 선량에 대한 품질검사는 물론, 전산화치료계획장치를 이용한 값과 이론적인 식을 바탕으로 수작업으로 계산한 값, 그리고 실험으로부터 구한 실측값을 비교 검토함으로써 치료계획의 신뢰성을 확인할 수 있었다.

  • PDF

Ecosysteme de I′Etang de Berre (Mediterranee nord-occidentale) : Caracteres Generales Physiques, Chimiques et Biologiques

  • Kim, Ki-Tai
    • 환경생물
    • /
    • 제22권2호
    • /
    • pp.247-258
    • /
    • 2004
  • Climatological, hydrological and planktonical research studies, measurements of primary production and photosynthetic efficiency from December 1976 to December 1978 have been carried out in two brackish lakes: Lake Etang de Berre and Lake Etang de Vaine located in the French Mediterranean coast, in the region of Carry-le-Rouet located on the north-west Mediterranean near Marseilles, and in fresh water inflows from 4 Rivers (Touloubre, Durance, Arc, Durancole) to Lake Etang de Berre. Physico-chemical parameters were measured for this study: water temperature, salinity, density, pH, alcalinity, dissolved oxygen (% saturation), phosphate, nitrate, nitrite, silicate etc. Diverse biological parameters were also studied: photosynthetic pigments, phaeopigments, specific composition and biomass of phytoplankton, primary pelagic production etc. Climatical factors were studied: air-temperature, solar-radiation, evaporation, direction (including strength) of winds, precipitation and freshwater volume of the four rivers. The changes in Lake ‘Etang de Berre’ ecosystem depend on the quality of the water in the Durance River, and on the effects of seawater near the entrance of the Caronte Canal. The water quality of the lake varies horizontally and vertically as a result of atmospheric phenomena, maritime currents and tides. The distribution of water temperatures is generally heterogeneous. Southeasterly winds and the Northeasterly Mistral wind are important in the origins of circulated and mixed water masses. These winds are both frequent and strong. They have, as a result, a great effect on the water environment of Lake Etang de Berre. In theory, the annual precipitation in this region is well over eight times the water mass of the lake. The water of the Durance River flows into Lake Etang de Berre through the EDF Canal, amounting to 90% of the precipitation. However, reduction of rainfall in dry seasons has a serious effect on the hydrological characteristics of the lake. The temperature in the winter is partially caused by the low temperature of fresh water, particularly that of the Durance River. The hydrological season of fresh and brackish water is about one month ahead of the hydrological season of sea water in its vicinity. The salinity of Lake Etang de Berre runs approximately 3$\textperthousand$, except at lower levels and near the entrance to the Caronte Canal. However, when the volume of the Durance River water is reduced in the summer and fall, the salinity rises to 15$\textperthousand$. In the lake, the ratio of fresh water to sea water is six to one (6:1). The large quantities of seston conveyed by rivers, particularly the Durance diversion, strongly reduce the transparency in the brackish waters. Although the amount of sunshine is also notable, transparency is slight because of the large amount of seston, carried chiefly by Tripton in the fresh water of the Durance River. Therefore, photosynthesis generally occurs only in the surface layer. The transparency progressively increases from freshwater to open seawater, as mineral particles sink to the bottom (about 1.7kg $m^{-2}a^{-1}$ on the average in brackish lakes). The concentration of dissolved oxygen and the rate of oxygen saturation in seawater (Carry-le-Rouet) ranged from 5.0 to 6.0 $m\ell$ㆍ.$1^{-1}$, and from 95 to 105%, respectively. The amount of dissolved oxygen in Etang de Berre oscillated between 2.9 and 268.3%. The monographs of phosphate, nitrate, nitrite and silicate were published as a part of a study on the ecology of phytoplankton in these environments. Horizontal and vertical distributions of these nutriments were studied in detail. The recent diversion of the Durance River into Lake Etang de Berre has effected a fundamental change in this formerly marine environment, which has had a great impact in its plankton populations. A total of 182 taxa were identified, including 111 Bacillariophyceae, 44 Chlorophyceae, and 15 Cyanophyceae. The most abundant species are small freshwater algae, mainly Chlorophyceae. The average density is about $10^{8}$ cells $1^{-1}$ in Lake Etang de Berre, and about double that amount in Lake Etang de Vaine. Differences in phytoplankton abundance and composition at the various stations or at various depths are slight. Cell biovolume V (equivalent to true biomass), plasma volume VP (‘useful’ biomass) and, simultaneously. the cell surface area S and S/V ratio through the measurement of cell dimensions were computed as the parameters of phytoplankton productivity and metabolism. Pigment concentrations are generally very high on account of phytoplankton blooms by Cyanophyceae, Chlorophyceae and Cryptophyceae. On the other hand, in freshwaters and marine waters, pigment concentrations are comparatively low and stable, showing slight annual variation. The variations of ATP concentration were closely related to those of chlorophyll a and phytoplankton blooms only in marine waters. The carbon uptake rates ranged between 38 and 1091 mg$Cm^{-2}d^{-1}$, with an average surface value of 256 mg; water-column carbon-uptake rates ranged between 240 and 2310 mg$Cm^{-2}d^{-1}$, with an average of 810, representing 290 mg$Cm^{-2}$, per year 45 000 tons per year of photosynthetized carbon for the whole lake. Gross photosynthetic production measured by the method of Ryther was studied over a 2-year period. The values obtained from marine water(Carry-le-Rouet) ranged from 23 to 2 337 mg$Cm^{-2}d^{-1}$, with a weighted average of 319, representing about 110 gCm$^{-2}$ per year. The values in brakish water (Etang de Berre) ranged from 14 to 1778 mg$Cm^{-2}d^{-1}$, with a weighted average of 682, representing 250 mg$Cm^{-2}$ per year and 38 400 tons per year of photosynthesized carbon for the whole lake.