• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1280-1284
• /
• 2006

This paper describes the methodology for environmental assessments of traffic noise sources. An attempt is made to establish evaluation scale relationships between noise quality Parameters and subjective degrees annoyance. Subjective experimental was conducted to determine the subjective degrees annoyance that scaling score compare with reference and varieties noise source about modified traffic noises with $40{\sim}85dB$. Also a correlation analysis between noise rating index and satisfactory percentage of the noise dose response curves varied with response was conducted. As a result of study, subjective annoyance degree has not correlation of proportional linearity to the A weight noise level, but has correlation of proportional linearity to the index composed to loudness and tonality. It is suggested to be resonable level 4.9 (equivalence about 53dB) index on the out door noise limits for traffic noise and to be 6 step scale base on the linearity for evaluation traffic noise.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2008.04a
• /
• pp.394-395
• /
• 2008

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.10
• /
• pp.1294-1299
• /
• 2000

The combustion characteristics have been investigated to develop the 50 kW-class gas turbine combustor. The combustor design program was developed and applied to design this combustor. The combustion air which has the temperature of 45, 200, $300^{\circ}C$ were supplied to combustor for elucidating the effect of inlet air temperature on CO, NOx emissions and flame temperature. The exit temperature and NO were increased and CO was decreased with increasing inlet air temperature. Also, the effect of equivalence ratio was considered to verify the combustor performance. The emissions of CO and NO with inlet air temperature can be analyzed qualitatively by measuring the temperature inside the combustor. The combustion performance with fuel schedule was evaluated to get the informations of the starting and part loading process of gas turbine. The combustion was stable above the equivalence ratio of 0.18. The pattern factor which is the important parameter of combustor performance was satisfied with the design criterion. Consequently the combustor was proved to meet the performance goal required for the target gas turbine system.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.75
• /
• pp.71-94
• /
• 2017

The Rotterdam Rules is the first international maritime carriage of goods Convention that acknowledge electronic records of contracts of carriage. The Rules have developed separate chapter in relation to electronic transport records' issuing, transfer, etc. This paper aims to evaluate Rotterdam Rules' contribution to the use of electronic transport records. To achieve the aims firstly this paper have examined the related articles of Rotterdam Rules, Secondly in practical aspects, this paper explores the opportunities and obstacles which could be happened in practical procedures, applicable to transport industry, shipper and holder of electronic transport records. Findings could be summarized as follows, first the Rules shows high acceptability to whom it may involved in transport industry by simplify the contents of the Rules to avoid conflict with each countries' national laws. The Rules acknowledge the functional equivalence between paper and electronic transport records in specific provisions. This could be important development to facilitate the use of electronic transport records. But the Rules have not mentioned liability limit of transport industry when the problems arise from issuing, tele-transmission, transfer of the records. And the secure of the functional equivalence between paper and electronic transport records also could be remained in uncertain regime due to different stance of each national laws.

• Journal of Environmental Science International
• /
• v.29 no.8
• /
• pp.847-855
• /
• 2020

This study presented problems and improvements in the quality control of an air monitoring network, using Gyeongnam as an example. 1) The effective utilization rate of the air monitoring was 95%, which showed good management, but the maximum of 2% was indicated by zero or detection limit among measurement data. 2) In the equivalence evaluation of PM_2.5, the slope and intercept satisfy the evaluation criteria; however, 1% of the PM_2.5/PM₁₀ ratios were outliers. 3) All air monitoring stations meet the quality control standards; however, the management status is added to the quality inspection, management system is unified and the related budget is expanded, and systematic commission management is required.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.440-446
• /
• 2005

A method is described for the determination of dibutyltin (DBT) in sediment by isotope dilution using liquid chromatography inductively-coupled plasma/mass spectrometry (LC-ICP/MS). To achieve the highest accuracy and precision, special attentions are paid in optimization and evaluation of overall processes of the analysis including extraction of analytes, characterization of the standards used for calibration and LC-ICP/MS conditions. An approach for characterization of natural abundance DBT standard has been developed by combining inductively-coupled plasma/optical emission spectrometry (ICP/OES) and LC-ICP/MS for the total Sn assay and the analysis of Sn species present as impurities, respectively. An excellent LC condition for separation of organotin species was found, which is suitable for simultaneous DBT and tributyltin (TBT) analysis as well as impurity analysis of DBT standards. Microwave extraction condition was also optimized for high efficiency while preventing species transformation. The present method determines the amount contents of DBT in sediments with expanded uncertainty of less than 5% and its result shows high degree of equivalence with reference values of an international inter-comparison and a certified reference material (CRM) within stated uncertainties.

• Nuclear Engineering and Technology
• /
• v.47 no.7
• /
• pp.791-803
• /
• 2015

The effective cross sections (XSs) in the direct whole core calculation code nTRACER are evaluated by the equivalence theory-based resonance-integral-table method using the WIMS-based library as an alternative to the subgroup method. The background XSs, as well as the Dancoff correction factors, were evaluated by the enhanced neutron-current method. A method, with pointwise microscopic XSs on a union-lethargy grid, was used for the generation of resonance-interference factors (RIFs) for mixed resonant absorbers. This method was modified by the intermediate-resonance approximation by replacing the potential XSs for the non-absorbing moderator nuclides with the background XSs and neglecting the resonance-elastic scattering. The resonance-escape probability was implemented to incorporate the energy self-shielding effect in the spectrum. The XSs were improved using the proposed method as compared to the narrow resonance infinite massbased method. The RIFs were improved by 1% in $^{235}U$, 7% in $^{239}Pu$, and >2% in $^{240}Pu$. To account for thermal feedback, a new feature was incorporated with the interpolation of pre-generated RIFs at the multigroup level and the results compared with the conventional resonance-interference model. This method provided adequate results in terms of XSs and k-eff. The results were verified first by the comparison of RIFs with the exact RIFs, and then comparing the XSs with the McCARD calculations for the homogeneous configurations, with burned fuel containing a mixture of resonant nuclides at different burnups and temperatures. The RIFs and XSs for the mixture showed good agreement, which verified the accuracy of the RIF evaluation using the proposed method. The method was then verified by comparing the XSs for the virtual environment for reactor applicationbenchmark pin-cell problem, as well as the heterogeneous pin cell containing burned fuel with McCARD. The method works well for homogeneous, as well as heterogeneous configurations.

• Korean Journal of Organic Agriculture
• /
• v.24 no.3
• /
• pp.369-383
• /
• 2016

Crop yield insurance program in Korea has rapidly grown not only in quantity but in quality for 15 years since it was introduced in 2001. Despite growth of Crop insurance, performance evaluation for crop yield insurance has not fully been evaluated at the farm, consumer and national level. The purpose of this study is to conduct the performance evaluation for crop yield insurance through estimating the effects of farm revenue stabilization and social welfare increase with three popular insurance items: apple, pear and sweet persimmon. Based on the analysis of social welfare effect, cost-benefit analysis of operating crop yield insurance was conducted at the national level. We found that crop yield insurance stabilizes farm revenue based on the estimated four risk indicators: Coefficient of Variation, Value at Risk, Certainty Equivalence, and Risk Premium. The result of cost-benefit analysis shows that crop yield insurance increases social net benefit by 44.1 billion won for the three items. As a result, crop yield insurance program has contributed remarkably on social welfare as well as farm management and its role will be more important in the future.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.3
• /
• pp.157-163
• /
• 2005

The pellets with multiple drug release system (MDRS) of Diltiazem. HCl which consist of immediate drug release layer, drug reservoir layer and controlled release rate membrane, were prepared by using CF-Coater. As main factors for more effective MDRS of Diltiazem. HCl, ethylcellulose was used for the controlling drug release rate, and diethylphthalate was used for plasticizer, respectively. In vitro evaluation study was performed by comparative dissolution test between our test MDRS and reference Diltiazem. HCl preparation. The physical tests were performed using FT-IR and SEM. In vivo evaluation was also performed by observing the behavior of a plasma drug concentration after oral administration. The bioavailability was determined by analyzing the blood sample after oral administration to healthy, male volunteers once a day. As a result, there were no significant differences in bioequivalence parameters $(AUC_{\infty},\;C_{max},\;t_{1/2})$ between two systems. It might be concluded that our MDRS of Diltiazem. HCl could be an alternative delivery system to reference drug preparation.

• Journal of Engineering Education Research
• /
• v.27 no.2
• /
• pp.3-12
• /
• 2024

The purpose of this study was to evaluate how well the 2020 vision presented by the Accreditation Board for Engineering Education of Korea(ABEEK) had been achieved, and to objectively examine the social status. It was very necessary for the development of engineering education in Korea to provide room for improvement by diagnosing how well the ABEEK, one of the major engineering education communities, was achieving its own vision. In order to achieve the objectives of the study, research methods such as literature review, survey research, and expert advisory committee were used. To evaluate the level of achievement of the Vision 2020 of the ABEEK, the analysis was based on the response results of 61 people who had experience as a member of the steering committe. In addition, the vision and mission of the 23 countries that are currently signatory members of the Washington Accord were surveyed, and the social responsibility and financial independence of the 20 countries that joined the signatory member countries before 2020 were compared with each other. As a result of the analysis, the item of securing international equivalence in engineering education received the most positive evaluation, and the social compensation efforts for accreditied graduates received the least evaluation. The ABEEK was evaluated as having a medium level of social responsibility and a low level of financial independence. Based on the results of this research, we proposed ways the ABEEK to contribute to the improvement of Korean engineering education.