Proceedings of the Korean Institute of Building Construction Conference
/
2014.05a
/
pp.4-5
/
2014
Planning earthmoving haul-route must be preceded for appropriate equipment fleet assignment. However, traditional haul-route planning methods have limitations relative to practical usage because multiple variables (e.g., grade/rolling resistance, length, equipment's weight etc.) should be considered at a time. Genetic algorithm(GA) was introduced to improve these traditional methods. However, GA based haul-route planning method still remains in inefficiency relative to computation performance. This study presents a new haul-route searching method that computes an optimal haul-route using GA. The system prototype is developed by using MATLAB(ver. 2008b). The system identifies an optimal haul-route by considering equipment type, soil type, and soil condition.
In semiconductor manufacturing, the probe process between fabrication and assembly process is constrained mostly by the equipment capacity because most products pass through the similar procedures. The probe process is usually performed in a batch mode with relatively short cycle times. The capability of the probe process can be determined by the optimal combination of the equipments and the products. A probe line usually has several types of equipment with different capacity. In this study, the probe line is modeled in terms of capacity to give the efficient planning and control procedure. For the practical usage, the hierarchical capacity planning procedure is used. First, a monthly capacity plan is made to meet the monthly production plan of each product. Secondly, the daily capacity planning is performed by considering the monthly capacity plan and the daily fabrication output. Simple heuristic algorithms for daily capacity planning are developed and some experimental results are shown.
Korean Journal of Construction Engineering and Management
/
v.15
no.6
/
pp.26-34
/
2014
Highway construction is a combination of linear, repetitive, and highly equipment intensive operations. Various types of construction equipment are deployed to ensure undisrupted performance of construction, and thus productivity improvement and cost-saving can be achieved through well-thought-out planning. The selection of construction equipment is dependent upon construction sequence, site conditions, and construction methods. In the process of planning, management should consider various types of construction methods per each type of construction operation. Also, management should map out proper construction equipment operation plan that takes the construction duration and cost measures into consideration. However, limited availability of historic data from the similar types of operations has been a stumbling block to proper construction planning, making the operations performed based upon experience and intuition guided by rules-of-thumb. As a consequence, the planing phase rarely provided an adequate validity in the implementation phase. The researchers developed a process logic for each construction type that management can utilize from early phase of highway construction planning process. Moreover, derived the construction equipment combination optimized for efficiency by using the process simulation technique. The developed method is expected to be useful for the decision-making process that aims to evaluate efficiency of various process plans and to ensure optimal selection of construction equipment for highway construction projects.
Background and Purpose: An analysis of the current nuclear medicine (NM) status and future demand in Turkey in line with the international benchmarks was conducted to establish a comprehensive baseline reference. Methods: Data from all NM centers on major equipment and manpower in Turkey were collected through a survey and cross-checked with the primary research and governmental data. Data regarding manpower currently working were obtained from the relevant academic centers and occupational societies. Results: The current numbers of NM laboratories, NM specialists, gamma cameras, PET/CT scanners, radioiodine treatment units for thyroid cancer are 217, 474, 287, 75 and 39, respectively. There was personnel and equipment need underestimated in the field compared to developed countries. Equipment insufficiency was more significant in the Ministry of Health (MoH) hospitals. These gaps should be eliminated with strategic planning of equipment and NM laboratories. Currently, the number of the PET/CT devices is at the level of the developed countries. The number of specialists in the field should reach the expected goal in 2023. By 2023, Turkey will need around 820 NM specialists, 498 gamma cameras and 99 PET/CT devices. In addition, further studies should be made regarding other related staff, particularly for health physicians, radiopharmacists and NM technicians. Conclusion: There is an insufficiency of personnel and equipment in Turkey's NM field. Comprehensive strategic planning is required to allocate limited resources and the purchase of the equipment and employment policies should be structured as part of "National Special Feature Requiring Health Service Plan".
The -advent of electronic navigation equipment and trustworthy computer which provides people with convenience made the management system by one-man bridge operation or the least people who are needed possible through the integration of communication network with various navigation equipment and related institution. One of the most needed ultra-modem navigation device for a mate, ECDIS is a core equipment for navigation in ENS that notifies peril to mate as well as supervises all tasks in hydrographical chart, voyage planning, course monitoring and voyage recording. We should make coast and ocean voyage planning first, for the secure navigation which is considering the course circumstances and next, for the reduction of voyage dates in economical aspect. There needs a thoughtful consideration about the feature of the ship itself and the course with weather condition in taking up the course and also we have to take into accounts about appropriate distance between ships. Considering the essential conditions of ECDIS the indispensable device in the future, it was developed the basic principle for voyage planning algorithm for officer and programmed to real implementation available. In this paper including most of the requirements in ECDIS performance standard I mentioned about such a basic and a core Principle with real application by using the Visual C++ programming language. The voyage plan includes the function that indicate and modifies all the way points in the course from department port to arrival port with erasing the wrong way points. Also, it provides in a document form that shows ETA at glance in average speed sailing.
Proceedings of the Korean Institute of Building Construction Conference
/
2022.04a
/
pp.69-70
/
2022
The domestic process planning generally relies on calculations based on the construction-standard-production-rate. This method requires trial and error practice during the construction phase to deduce the optimized equipment combination for time and cost. Trial and error during construction can lead to cost overruns and schedule delays. Accordingly, this paper suggests an advanced method for establishing a productivity database based on combinations of equipment and also considering site conditions in order to reduce the timely effort for deducing the optimized equipment combination. For this purpose DES (Discrete Event Simulation) model was developed based on the information provided in the construction-standard-production-rate.
The purpose of this study was to determine the difference between estimated profit and utilization of medical equipment upon purchasing and actual results at one teaching hospital in Seoul, Korea Medical equipments over $100,000 from 1992 to 1997 were selected and results were as follows: 1. Twenty equipments out of thirty exceeded estimated profits and the difference was 3.98 billion won and ten equipments did not reach the estimated profits and 5.5 billion won was the difference. Diagnostic equipment exceeded the estimated profit which surgical equipment didn't. 2. Eleven equipments exceeded estimated utilization, which showed 100%. In the mean time, eighteen equipments didn't reach the estimated utilization, which was 71%. Diagnostic equipment showed the less estimated utilization than surgical equipment 3. Twenty-one equipments showed the 6.83 billion won profits and nine equipments showed the 1.6 billion won deficits. Diagnostic equipment was more profitable than surgical equipment. Finally. diagnostic equipment helped improving hospital management than surgical equipment. 4. Main factors which showed the big difference from the initial plan were lacking reasonable estimated method, no evaluation system for purchase, emphasis in medical treatment, excessive expenditure in maintenance, duplicated investment for medical equipment and leadership commitment. As a result. Substantial planning is required from the requesting department in consideration of estimated profit and utilization and systematic quality control is needed to confirm. Also, One-sided decision making should be avoided to purchase a high cost medical equipment and efforts should be made in examining carefully and developing a reasonable analytic method.
Journal of The Korea Institute of Healthcare Architecture
/
v.12
no.1
/
pp.61-69
/
2006
The Diagnostic Imagining Department essentially needs to be transformed by the plan of the room and the medical equipment which should be improved according to a rapid development in technology. And the room should be considered the scale and composition an the time of planning. Because this part is often influenced in a specific character of imaging equipment in the room. The researches on the scale and composition of Diagnostic Imaging Department were the main part in 1980's but after 1990's this kind of researches have not been enough. So this study has an intention of proposing basic data which is used in planning the Diagnostic Imaging Department by analyzing the actual condition of the area organization in general hospital.
This study examined the menu management and utilization of cooking equipment at school foodservice operations in the Chonbuk area. Self-administered questionnaires were collected from a total of 193 school dietitians. Statistical data analysis was completed using the SPSS v. 11.5 program. The results are summarized as follows. Among the 193 schools, 58.5% were elementary schools and 41.5% were middle and high schools. Approximately 97% of the schools prepared meals in the conventional manner. Among the school, 68.4% had a menu cycle of 1${\sim}$2 weeks. The frequency of using convenience foods was significantly different between the elementary schools and middle and high schools(p<0.001). Approximately 45% of the dietitians responded that the most important details for menu planning were menu variety and consumer preference. However, 66.8% of the dietitians responded that a key problem for menu planning was limited and worn-out kitchen equipment. Although the cost of purchasing cooking equipment is high, most dietitians responded they have high needs for equipment in order to meet of the quantity demands of food production. In terms of utilized cooking equipment, most schools had mixers, vegetable cutters, choppers, dish washers, etc. Yet the amenities most often lacking were meat slicers, composting machines, ovens, and griddles. In utilizing the cooking equipment, there was no significant difference between the dietitians in the elementary(3.67) schools and those in the middle and high school foodservice systems(3.70); however, the utilization level was poor. Therefore, governmental regulatory agencies should review and finance support for purchasing cooking equipment. Finally, purchasing analysis was conducted regarding the dietitians' opinions on menu recipes and useful equipment.
Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
/
v.22
no.10
/
pp.49-55
/
2008
This paper presents a novel evaluation method of life expectancy of power system equipment. The life expectancy means expected remaining lifetime; it can be usefully utilized to maintenance planning, equipment replacement planning, and reliability assessment. The proposed method is composed of three steps. Firstly, a cumulative probability for future years is evaluated for targeted age year. Secondly, the cumulative probability is modeled by well-blown cumulative distribution function(CDF) such as Weibull distribution. Lastly, life expectancy is evaluated as the mean value of the model. Since the model CDF is established in the proposed method, it can also evaluate the probability of equipment retirement within specific years. The developed method is applied to examples of generators of combined cycle power plants to show its effectiveness.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.