• 드라이브 ㆍ 컨트롤
• /
• 제19권4호
• /
• pp.54-61
• /
• 2022

This is a basic study analyzing emissions of an agricultural tractor during tillage operations. In this study, CO, THC, NOx, and PM considered as emission factor were analyzed during plow and rotary tillage operation by the tractor. Engine torque and rotational speed were measured through ECU. Engine power was calculated using engine torque and rotational speed. The emissions was calculated based on the number of units, rated power, load factor, and operating time. Results showed that the load factor was calculated almost twice, which was higher than 0.48. It was also observed that the emission of the tractor was variable for different agricultural operations because tractor loads were different based on operations. There was a difference in emissions due to differences in plow and rotary working hours. To estimate the emission of agricultural tractor based field operations in detail, it is necessary to consider TAF (Transient Adjustment Factor) and DFA (Deterioration factor). In the future, TAF and DFA will be considered to estimate emissions of the agricultural tractor. Finally, results of this study can contribute to the literature to estimate tractor emissions accurately.

• 드라이브 ㆍ 컨트롤
• /
• 제19권4호
• /
• pp.36-45
• /
• 2022

The aim of this study was to verify an E-driving system of a 44 kW-class electric tractor using agricultural workload data. Workload data were acquired during field test (plow tillage, rotary tillage, loader operation, field driving, asphalt driving) using a conventional tractor with a load measurement system. These workload data were converted to data of a 44 kW-class tractor based on the load factor of the engine. These data were used to verify the design of the E-driving system of an electric tractor. High-load operations such as plow tillage, rotary tillage, and loader operation could be performed at stage L and stage M. High-speed operation (asphalt driving) could be effectively performed at stage H using a rated rotational speed of the motor. As a result, the E-driving system of the electric tractor was possible to perform all major agricultural operations according to gear stages of range shift. Based on results of this research, we plan to develop an electric tractor equipped with an E-driving system and conduct research on actual vehicle verification in the future.

• 드라이브 ㆍ 컨트롤
• /
• 제18권4호
• /
• pp.19-27
• /
• 2021

A bunker bed is a type of furniture that efficiently utilizes a narrow indoor space by having a high bed and using the empty space below as a living and storage space. The demand for multi-purpose furniture is increasing due to the recent increase in single-person households and wide-spread shared accommodation. According to the consumer research, one of the major drawbacks of a bunker bed was to get on and off the bed through a ladder or stairs. In order to overcome these problems, it was confirmed that the height adjustment function that can easily adjust the minimum and maximum heights of the bed was necessary. In this study, a height adjustable bunker bed was designed by using a gas spring that generates a repulsive force by the compressed gas inside. The design process consisted of the following three steps: Firstly, the hysteresis characteristics due to a friction and spring constant of a commercial gas spring were confirmed by measuring the repulsive force vs. compressed displacement. Secondly, requirements of the vertical lifting force exerted on the bed against gravity force were derived. Finally, the height-adjustable bed using the four-bar link mechanism was designed with 4 parameters so that the bed weight of 60-70 kgf could be adjusted to 800 mm in height by an affordable initial operation force. The performance was verified through prototype production and the results of vertical displacement and force to move were nearly the same as designed. In addition, an electrically operated height-adjustable bed was also designed with linear actuators and the performance was proved with the prototype.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권1호
• /
• pp.85-94
• /
• 2022

Recently, consumers who prefer contactless consumption are increasing due to pandemic trends such as Corona 19. This is the driving force for developing the last mile-based logistics ecosystem centered on the online e-commerce market. Lastmile led to the continued development of the logistics industry, but increased the amount of cargo in urban area, and caused social problems such as overcrowding of logistics. The courier service in the logistics base area utilizes the process of visiting the delivery site directly because the courier must precede the loading work of the cargo in the truck for the delivery of the ordered product. Currently, it's carried out as automated logistics equipment such as conveyor belt in unloading or classification stage, but the automation system isn't applied, so the work efficiency is decreasing and the intensity of the courier worker's labor is increased. In particular, small-scale courier workers belonging to the sub-terminal unload at night at underdeveloped facilities outside the city center. Therefore, the productivity of the work is lowered and the risk of safety accidents is exposed, so robot-based loading technology is needed. In this paper, we have derived the top-level concept and requirements of robot-based loading system to increase the flexibility of logistics processing and to ensure the safety of courier drivers. We defined algorithms and motion concepts to increase the cargo loading efficiency of logistics sub-terminals through the requirements of end effector technology, which is important among concepts. Finally, the control technique was proposed to determine and position the load for design input development of the automatic conveyor system.

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.148-163
• /
• 2021

Timely fault identification is important for safe and reliable operation of the electric valve system. Many research works have utilized different data-driven approach for fault diagnosis in complex systems. However, they do not consider specific characteristics of critical control components such as electric valves. This work presents an integrated shallow-deep fault diagnostic model, developed based on signals extracted from DN50 electric valve. First, the local optimal issue of particle swarm optimization algorithm is solved by optimizing the weight search capability, the particle speed, and position update strategy. Then, to develop a shallow diagnostic model, the modified particle swarm algorithm is combined with support vector machine to form a hybrid improved particle swarm-support vector machine (IPs-SVM). To decouple the influence of the background noise, the wavelet packet transform method is used to reconstruct the vibration signal. Thereafter, the IPs-SVM is used to classify phase imbalance and damaged valve faults, and the performance was evaluated against other models developed using the conventional SVM and particle swarm optimized SVM. Secondly, three different deep belief network (DBN) models are developed, using different acoustic signal structures: raw signal, wavelet transformed signal and time-series (sequential) signal. The models are developed to estimate internal leakage sizes in the electric valve. The predictive performance of the DBN and the evaluation results of the proposed IPs-SVM are also presented in this paper.

• 한국정보통신학회논문지
• /
• 제25권7호
• /
• pp.910-916
• /
• 2021

현대 사회는 4차 산업혁명의 영향에 의해 다양한 디지털 통신 장비가 사용되고 있다. 이에 따라 데이터 전송 과정에서 발생하는 잡음제거에 관심이 높아지고 있으며, 효율적으로 영상을 복원하기 위한 연구가 진행되고 있다. 본 논문에서는 디지털 이미지 전송 과정에서 발생하는 AWGN을 제거하기 위한 필터링 알고리즘을 제안한다. 제안한 알고리즘은 영상에서 강하게 나타나는 AWGN을 제거하기 위해 블록매칭에 따라 입력화소의 주변에서 비슷한 패턴을 가진 영역을 선별하여 유사성이 높은 화소를 분류한다. 선별된 화소는 로컬 스티어링 커널로 구한 가중치를 적용하여 추정값을 정하며, 센터마스크의 표준편차에 따라 입력화소값을 가감하여 최종출력을 구한다. 제안한 알고리즘을 평가하기 위해 기존 AWGN 제거 알고리즘들과 시뮬레이션하였으며, 확대영상과 PSNR을 사용하여 비교 분석하였다.

• Journal of Preventive Medicine and Public Health
• /
• 제55권6호
• /
• pp.539-548
• /
• 2022

Objectives: The purpose of this study was to assess the organizational effectiveness of the introduction of a healthcare information system (electronic medical records and databases) in healthcare in Kazakhstan. Methods: The authors used a combination of 2 methods: expert assessment and strengths, weaknesses, opportunities, and threats (SWOT) analysis. SWOT analysis is a necessary element of research, constituting a mandatory preliminary stage both when drawing up strategic plans and for taking corrective measures in the future. The expert survey was conducted using 2 questionnaires. Results: The study involved 40 experts drawn from specialists in primary healthcare in Aktobe: 15 representatives of administrative and managerial personnel (chief doctors and their deputies, heads of medical statistics offices, organizational and methodological offices, and internal audit services) and 25 general practitioners. Conclusions: The following functional indicators of the medical and organizational effectiveness of the introduction of information systems in polyclinics were highlighted: first, improvement of administrative control, followed in descending order by registration and movement of medical documentation, statistical reporting and process results, and the cost of employees' working time. There has been no reduction in financial costs, namely in terms of the costs of copying, delivery of information in paper form, technical equipment, and paper.

• Imaging Science in Dentistry
• /
• 제52권3호
• /
• pp.283-288
• /
• 2022

Purpose: This study was conducted to measure the radiation exposure and image quality of various cone-beam computed tomography (CBCT) machines under common clinical conditions and to analyze the correlation between them. Materials and Methods: Seven CBCT machines used frequently in clinical practice were selected. Because each machine has various sizes of fields of view (FOVs), 1 large FOV and 1 small FOV were selected for each machine. Radiation exposure was measured using a dose-area product (DAP) meter. The quality of the CBCT images was analyzed using 8 image quality parameters obtained using a dental volume tomography phantom. For statistical analysis, regression analysis using a generalized linear model was used. Results: Polymethyl-methacrylate (PMMA) noise and modulation transfer function (MTF) 10% showed statistically significant correlations with DAP values, presenting positive and negative correlations, respectively (P<0.05). Image quality parameters other than PMMA noise and MTF 10% did not demonstrate statistically significant correlations with DAP values. Conclusion: As radiation exposure and image quality are not proportionally related in clinically used equipment, it is necessary to evaluate and monitor radiation exposure and image quality separately.

• 한국컴퓨터정보학회논문지
• /
• 제27권12호
• /
• pp.209-217
• /
• 2022

함정 전투관리체계는 다양한 센서, 무장 장비들이 연동 노드를 통해 연결되며 체계내 노드간 효율적인 통신을 위해 DDS(Data Distribution Service) 통신을 활용한다. DDS를 사용하기 위해 체계내 응용소프트웨어 사이에는 DDS토픽을 기본으로 하는 PUB/SUB(Publication/Subscribe)방식으로 통신한다. 이 PUB/SUB방식으로 통신하는 DDS 메시지 구조가 일치하지 않으면 송수신 응용소프트웨어에서 잘못된 명령처리 및 정보전달 등 문제가 발생한다. 이를 개선하기 위해 본 논문에서는 해시트리를 활용한 DDS 메시지 구조 무결성 검증 방법을 제안한다. 제안하는 방법의 전투관리체계에 적용가능성을 확인하기 위해, 제안하는 방법의 메시지 구조 무결성 검증률을 측정하고 전투관리체계의 운용과 개발과정에 미치는 영향을 확인하기 위해 전투관리체계 초기화 시간 비교, 메시지 해시트리의 생성시간 측정을 하였다. 이 시험을 통해 본 논문에서 제안하는 체계 안정성을 위한 메시지 구조 검증 방법이 함정 전투관리체계에 적용 가능함을 확인하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제18권4호
• /
• pp.77-83
• /
• 2021

With the progress in virtual reality technology, various virtual objects can be displayed using head-mounted displays (HMD). However, force feedback sensations such as pushing against a virtual object are not possible with an HMD only. Focusing on force feedback, desktop-type devices are generally used, but the user cannot move in a virtual space because such devices are fixed on a desk. With a wearable force feedback device, users can move around while experiencing force feedback. Therefore, the authors have developed a wearable force feedback device using a magnetorheological fluid clutch and pneumatic rubber artificial muscle, aiming at presenting the elasticity, friction, and viscosity of an object. To date, we have developed a wearable four-degree-of-freedom (4-DOF) force feedback device and have quantitatively evaluated that it can present commanded elastic, frictional, and viscous forces to the end effector. However, sensory evaluation with a human has not been performed. In this paper, therefore, we conduct a sensory evaluation of the proposed method. In the experiment, frictional and viscous forces are rendered in a virtual space using a 4-DOF force feedback device. Subjects are asked to answer questions on a 1- to 7-point scale, from 1 (not at all) to 4 (neither) to 7 (strongly). The Wilcoxon signed rank test was used for all data, and answer 4 (neither) was used as compared standard data. The experimental results confirmed that the user could feel the presence or absence of viscous and frictional forces. However, the magnitude of those forces was not sensed correctly.