• 한국정보통신학회논문지
• /
• 제10권4호
• /
• pp.769-774
• /
• 2006

본 논문에서는 능동현가장치의 해석 및 설계에 최소위상시스템개념을 적용하여 제어시스템설계에 응용 할 수 있는 이론적 수식모델링에 관한 연구를 수행하였다. 최근의 현가장치설계에서는 강성과 댐핑을 능동적으로 제어하는 기술의 적용이 일반화 되고 있으며, 다른 차량안정성제어장치와의 연계성이 높아짐에 따라, 제어시스템설계에서 보다 내구성이 강하고 제어효과의 응답성이 빠르며 정도 또한 높은 제어장치의 필요성이 요구되고 있다. 본 연구는 센서와 액츄에이터의 위치관계에 따른 능동현가장치의 위상시스템을 해석하여 위와 같은 빠른 응답성과 높은 정도의 제어가 가능한 제어시스템을 해석, 설계하기 위하여 제어장치의 대칭성에 관한 해석을 하였다. 그리고 대칭인 대상시스템에 관한 대칭 제어시스템을 설계하기 위한 모델링 및 적용방법을 수식적으로 해석하였으며, 현가장치의 제어시스템설계에 중요한 내외란성 향상을 위한 강인제어시스템설계에 적용하는 방법에 관해 고찰하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1107-1112
• /
• 2002

An easy elevator originated is an opened system to compare an existing equipment, and learning efficient is high as a wiring that the sequence control circuit is on and off. The structure of an equipment to be controled from the first floor to the fifth floor is constructed by a lamp to express the function of the open-close of the door according to the cage moving, to express the mechanical actuation of the forward-reverse break and motor of load and of hand-worked control component of Push-Button S/W, L/S and Relay. In order to act of the elevator function that these components connected, designed the auto program and the sequence control circuit. Consequently the process that these(1~5steps) operated the cage with an auto program of the elevator and the sequence control circuit is controled by the step of forward and reverse that the L/S1~L/S5 of sensor adjust function let posit, by the adjustable S/W1~S/W5 of PLC testing panel and the S/W1~S/W5 which installed on the transparent acryl plate of a frame. In here, improved apparatus is the learning equipment of combined use to study the principle and the technique of the originated sequence control circuit and the auto program of PLC.

• 한국지열·수열에너지학회논문집
• /
• 제7권2호
• /
• pp.30-36
• /
• 2011

In this study, energy saving performance of outdoor temperature reset control strategy for central cooling system is researched by experiments. Outdoor temperature reset control is the control method to change indoor air set temperature according to outdoor air temperature change. The range of indoor air set temperature is represented by the comfort temperature range of indoor air temperature offered from ASHRAE and indoor air set temperature is programmed between $22^{\circ}C$ and $27^{\circ}C$ by outdoor air temperature $20^{\circ}C{\sim}32^{\circ}C$ in summer. As a result of applying outdoor temperature reset control to central cooling system, the suggested control method shows better performances of energy savings than the conventional method which indoor temperature maintains constantly.

• 반도체디스플레이기술학회지
• /
• 제5권4호
• /
• pp.11-15
• /
• 2006

Expose equipment system that is used for manufacturing process of Flat Panel Display, is most important equipment in whole process. Expose equipment that is for making pattern of mask on substrate, consists of optical part, stage part and transport part. The stage is an important part that aligns mask and substrate for delivering pattern of mask to substrate exactly. In this paper, control system of expose stage that is able to use mask and substrate of diverse size, with PC controller using GUI interface instead of PLC control system. The existing PLC control system does not have the suitable structure for using mask of diverse size. GUI interface integration control system is based on PC. So it has the advantage of convenient use and active operation. We embodied PLC control system in integration control system based on PC, and verified utility possibility through the standard test course.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2375-2380
• /
• 2008

Controlling of thermal environment and flow in nanoimprint process chamber is important to ensure high precision levels of products. The purpose of this paper is to build optimal nanoimprint process environment. Because of this, Optimum PI control parameter for precise temperature control has been examined. Also porous medium of ventilation system is simulated for uniform flow in the equipment chamber. The porous medium consists of mesh structure, and is installed to place which flow the influx of the air flows. PID control parameter is based on the data obtained by experiment. And then heating and cooling method which simultaneously operated was used for decreasing an error. In conclude temperature in the equipment chamber was able to control precisely in the range of ${\pm}0.1^{\circ}C$ by the PID control parameter and Deadband.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제11권4호
• /
• pp.209-217
• /
• 2003

The term “energy saving is economical” is appropriate for the national view point and for design and assessment of one system, but not appropriate when choosing the system by comparing alternative systems in the early design step. Sometimes, non-energy saving system is more economical than energy saving system because of the price of electricity, gas or oil, which are used for operating the air conditioning system. Therefore, when designing a system, we should consider the efficient alternatives through economic assessment of energy saving method. However, research on non-operating number control of the system is not sufficient because it is more common to use operating number control of the system for most economic assessment of air conditioning systems. For this reason, this research can provide the economic operating number control method as basic design data. The data obtained through analysis of life cycle cost based on amount of yearly energy use, are produced by system simulation of HASP/ACLD/8501 and HASP/ACSS/8502 for six alternative heating$.$cooling systems based on seasonal air conditioning system, which is widely used for medium and large size office buildings in Busan.

• 한국엔터테인먼트산업학회논문지
• /
• 제5권1호
• /
• pp.122-126
• /
• 2011

본 논문에서는 세계적인 열차제어시스템의 발전 추세에 따라, 향후 국내 열차제어시스템의 개량 및 상호운용성을 확보하기 위한 목적으로 열차제어용 차상장치의 상호운용성을 확인하기 위한 시험의 결과에 대해 제시하고 있다. 안전이 최우선되는 철도시스템의 특성상 열차제어용 차상장치를 실제 열차에 설치하고 지상장치가 설치된 구간에서 시험 운행하는 것은 열차운행의 안전이 보장되지 못하기 때문에 열차제어시스템의 모의시험환경을 구성하여 시험하였다. 이를 위해 상호운용을 위한 열차제어용 차상장치의 송수신 데이터 체계를 확인하고 열차제어용 차상장치에 적용하여 상호운영성을 시험하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권1호
• /
• pp.27-32
• /
• 2015

Functional safety is part of the overall safety relating to the equipment under control (EUC) and the EUC control system that depends on the correct functioning of the electrical/electronic/programmable electronic (E/E/PE) safety-related systems. Since the complexity of the medical equipment is increased, manufactures have to obtain functional safety as well as basic safety. This study proposes a perspective for applying functional safety to medical equipment. The research is carried out with respect to overall safety life-cycle of functional safety and essential performance of the medical equipment. The relationship between functional safety and essential performance is identified centered on the safety function. The essential performance using E/E/PE systems is defined as a safety function of functional safety. This approach is applied to a ultrasound imaging system as a case study.

• 한국주조공학회지
• /
• 제28권2호
• /
• pp.74-78
• /
• 2008

An integrated riser heating equipment has been developed to control shrinkage defects originated from casting of a marine propeller. The integrated riser heating equipment is composed of up/down moving parts, heating power source parts and an integrated controller. Heat capacity putting into the riser was calculated quantitatively on the base of a heat transfer analysis, which consisted of the establishment of heating model and the theoretical analysis for heat transfer. The riser heating equipment was evaluated through arc heating and electro-slag heating method. With the results, the arc type heating method was selected by considering high thermal efficiency, inexpensive cost, and convenient workship. This equipment improves the quality of a propeller casting and the poor working environment.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1959-1962
• /
• 2009

In this paper, we derive the hazard which is a criterion of safety assurance by PHA for the ATP equipped in Korea Tilting Train. The ATP onboard equipment in Korea Tilting Train was introduced as ETCS Level l(which is ETCS specification). Also, the ATP trackside equipment was introduced as a ETCS SRS(System Requirement Specification) 2.2.2 and it has a target for commercial operation in 2009 late. In IEC 62278(EN50126), it recommend of PHA to derive a hazard of target system in concept establishment step and estimate if it can control as a tolerable level and then derive safety case to control the hazard by lifecycle. Therefore, we indicate the hazard using criterion of safety assurance by PHA using FRS (Functional Requirement Specification) 5.0. which is a upper criterion than SRS. The hazard of ATP onboard equipment derived in Korea Tilting Train will be able to use as ATP functional hazards of unified onboard equipment in G7 which is a multiple unit and preliminary hazards of ATP onboard equipment in NEL drived by Korail.