• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.2
• /
• pp.119-124
• /
• 2015

The purpose of this research is a verification of the current equation for calculating equipment number and a suggesting a method for development of a rational new equation. The equation for calculating equipment number consists of total surface area of a ship that fluid resistance act on. Equipment number determines the specification of anchoring and mooring equipment such as anchor weight, anchor chains length and diameter, the number, length and breaking load of tow lines and mooring lines. The equation for equipment number calculation is basically derived considering x, y components of a wind and current force acting on a ship. But this equation is only based on a tanker, which was main type of ships when the equation was derived. Therefore, verification of the equation is required for other types of ships, such as container carrier, LNG carrier, etc. Therefore, in this research, we find out the equation for equipment number calculation should be revised for other types of ships especially the container carrier, by comparing wind and current force acting on a ship to holding force of an anchor and anchor chains, which are selected based on the equipment number.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.35-43
• /
• 2014

PURPOSES: This study provides a methodology for estimating proper number of equipment for ordinary road management works. METHODS: Utilizing a computerized data of record systems (KAMIS) in 18 regional offices, two evaluation indicators were calculated and then normalized for objective comparison. Applied magnifying factor to the outputs, the proper number of equipment can be estimated. RESULTS: As a result, proper number of equipment by regional offices were required 28% more than current conditions. CONCLUSIONS: Using the proposed a methodology, fundamental data for scientific and reasonable strategies can be stored as well as be used for the future plan for budget allocation.

• Korean Management Science Review
• /
• v.34 no.2
• /
• pp.103-113
• /
• 2017

The artillery is a key element of the ground forces operation during wartime, and the military engineers support the artillery position development operation to support the smooth operation of the artillery. In establishing the artillery position development operation plan, the commander requires more than his intuition to find the best option reflecting a number of elements of the battlefield situation which changes every minute. Moreover, the number of available equipment is smaller than the number of required position developments, and the effective equipment operation becomes essential element of this issue. This study quantified the capability of the available engineering equipment, organized a number of teams enabling equipment to put out the maximum capacity based on the quantified figures, and formed the model which allocates the team to the developing points to minimize the developing time. The goal programming method was applied to resolve the problem. The developed model was applied to compare the total mission duration following the number of teams, the variable for commander's decision, and the result of this study can be used as the quantitative data for commander's decision making process in establishing the artillery position development support operation through effective equipment management.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.5
• /
• pp.39-39
• /
• 2003

As the design rules in semiconductor manufacturing process become more and more stringent, the higher degree of planarization of device surface is required for a following lithography process. Also, it is great challenge for chemical mechanical polishing to achieve global planarization of 12” wafer or beyond. To meet such requirements, it is essential to understand the CMP equipment and process itself. In this paper, authors suggest the velocity distribution on the wafer, direction of friction force and the uniformity of velocity distribution of conventional rotary CMP equipment in an analytical method for an intuitive understanding of variation of kinematic variables. To this end, a novel dimensionless variable defined as “kinematic number” is derived. Also, it is shown that the kinematic number could consistently express the velocity distribution and other kinematic characteristics of rotary CMP equipment.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.5
• /
• pp.29-38
• /
• 2003

As the design rules in semiconductor manufacturing process become more and more stringent, the higher degree of planarization of device surface is required for a following lithography process. Also, it is great challenge for chemical mechanical polishing to achieve global planarization of 12” wafer or beyond. To meet such requirements, it is essential to understand the CMP equipment and process itself. In this paper, authors suggest the velocity distribution on the wafer, direction of friction force and the uniformity of velocity distribution of conventional rotary CMP equipment in an analytical method for an intuitive understanding of variation of kinematic variables. To this end, a novel dimensionless variable defined as “kinematic number” is derived. Also, it is shown that the kinematic number could consistently express the velocity distribution and other kinematic characteristics of rotary CMP equipment.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.2
• /
• pp.27-35
• /
• 2017

Purpose: This study analyzed the status of general hospitals as an expanded concept of medical resources including medical staff and equipment. The purpose of this study is to provide a basic for the feasibility study of the scale and establishment of facility guidelines at the planning stage of general hospitals. Methods: The subjects of this study were limited to general hospitals. The status of medical resources was based on the data of the Health Insurance Review and Assessment Service. The number of beds, doctors, nursing grades and major medical equipment were surveyed in 335 general hospitals. Results: 1) The characteristic of general hospitals varies depending on the number of inpatient beds. To be concrete, there were differences in the number of medical staffs and equipments in general hospitals based on 300 500 800 1,000 beds. 2) As the number of hospital beds increases, the number of medical staff increases more than medical equipment and facilities. Medical equipment and facilities remain constant, even when the number of beds increases. On the other hand, the number of medical staff increased about 1.5 times in each level. Implications: Architectural plans for medical staff should be considered differently depending on the number of beds. In particular, architectural planning and facility guidelines should be applied differently based on 300 and 500 beds.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.39-42
• /
• 2012

Pusher-Loaded Scrapers are important construction equipment for large earthmoving operations. Production rates of a Pusher-Loaded Scraper vary greatly in accordance with the temperature or elevation, the equipment performance, haul speed, haul-road conditions, the method of loading, and Number of scrapers per one pusher. Determining of most economical scrapers fleet regarding the size of equipment, model name, and number of scrapers demands time-consuming calculation because it needs to reference of varied performance charts or tables and repeat complicated calculation. In this study, decision-making support system for the Optimal Pusher-loaded Scrapers Fleet is suggested for the purpose of calculating easily and handling effectively variables which are changed depend of the work conditions. The prototype of this program is developed using MATLAB. And the Database of Pusher-loaded Scraper embodies Performance chart & Retarder chart, soil properties, and calculation-support table.

• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.79-92
• /
• 2019

The existing computer equipment management system is designed to computerize and manage equipment information that was managed only by documents in the computer room. However, the existing system focuses on computerizing the equipment arranged in the document, so there is a limit to the equipment that can be registered and it is difficult to find the necessary equipment. In addition, it caused inconvenience to confirm whether the registered equipment is currently used. In this paper, we redesign and implement the computer equipment management system to solve the problem. For this purpose, the existing computer equipment management system was thoroughly analyzed throughout, and the system is designed and implemented to improve the system by reflecting the opinions of public officials and management companies using the system. In the performance evaluation, the efficiency of the improved system is proved by comparing the number of equipment registrations and equipment search accuracy of the existing system.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.11 no.4
• /
• pp.209-217
• /
• 2003

The term “energy saving is economical” is appropriate for the national view point and for design and assessment of one system, but not appropriate when choosing the system by comparing alternative systems in the early design step. Sometimes, non-energy saving system is more economical than energy saving system because of the price of electricity, gas or oil, which are used for operating the air conditioning system. Therefore, when designing a system, we should consider the efficient alternatives through economic assessment of energy saving method. However, research on non-operating number control of the system is not sufficient because it is more common to use operating number control of the system for most economic assessment of air conditioning systems. For this reason, this research can provide the economic operating number control method as basic design data. The data obtained through analysis of life cycle cost based on amount of yearly energy use, are produced by system simulation of HASP/ACLD/8501 and HASP/ACSS/8502 for six alternative heating$.$cooling systems based on seasonal air conditioning system, which is widely used for medium and large size office buildings in Busan.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.322-333
• /
• 2019

The purpose of the current study was to investigate the level of market size and market share of domestic research equipments for analyzing the difference of the number and amount of construction by the manufacturing countries in the basic and analytical science fields based on the information of the research equipment invested by the Korean government for the past 14 years. As of January 1 2019, from 2005 to 2018, 20,687 research facilities & equipments (main equipment with a construction cost of 30 million won or more) built in the basic and analytical science fields were selected for this study and their components, standard classification, number of construction, and amount of construction by country of manufacture were analyzed. Differences of the number and amount of construction among manufacturing countries were tested using a single sample chi-square test and one-way analysis of variance, followed by Bonferroni's post-hoc test. As a result of this study, the number of construction (p<.001) and construction amount (p<.05) were statistically different for each manufacturing country. The level of market size and market share was significantly different according to the equipment standard classification (p<.05). Therefore, differentiated strategies of the government and policy research projects will be required for each type of equipment and amount in order to support the policy for the localization of research equipment.