• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.10
• /
• pp.543-550
• /
• 2016

Amine-type PP-g-VBC-EDA adsorbent, which possesses anionic exchangeable function, was prepared through photoinduced graft polymerization of vinylbenzyl chloride (VBC) onto polypropylene non-woven fabric and subsequent amination reaction using ethylenediamine (EDA). Adsorption characteristics of anionic nutrients on the PP-g-VBC-EDA adsorbent have been studied by batch adsorption experiments. The equilibrium data well fitted the Langmuir isotherm model, and the maximum monolayer sorption capacity was found to be 59.9 mg/g for $NO_3-N$ and 111.4 mg/g for $PO_4-P$. The adsorption energies were higher than 8 kJ/mol indicating anion-exchange process as the primary adsorption mechanism. The pseudo-second order kinetic model described well the kinetic data and resulted in the activation energy of 9.8-36.7 kJ/mol suggesting that the overall rates of $NO_3-N$ and $PO_4-P$ adsorption are controlled by the chemical process. Thermodynamic parameters such as ${\Delta}G^o$, ${\Delta}H^o$ and ${\Delta}S^o$ indicated that the adsorption nature of PP-g-VBC-EDA for anionic nutrients is spontaneous and exothermic. The PP-g-VBC-EDA could be regenerated by washing with 0.1 N HCl.

• Journal of the Korean Society of Groundwater Environment
• /
• v.4 no.4
• /
• pp.199-211
• /
• 1997

As a part of study on geological disposal of radioactive waste, hydrogeochemical characteristics of deep granitic groundwater in Korea were investigated through the construction of a large geochemical dataset of natural water, the examination on the behaviour of dissolved constituents, and the consideration of phase stability based on thermodynamic approach. In granitic region, the contents of total dissolved solids increase progressively from surface waters to deep groundwaters, which indicates the presence of more concentrated waters at depth due to water-rock interaction. The chemical composition of groundwater evolves from initial $Ca^{2＋}$－(C $l^{－}$＋S $O_4$$^{2-}$) or $Ca^{2＋}$-HC $O_3$$^{－}$ type to final N $a^{＋}$-HC $O_3$$^{－}$ or N $a^{＋}$－(C $l^{－}$＋S $O_4$$^{2-}$) type, via $Ca^{2＋}$-HC $O_3$$^{－}$ type. Three main mechanisms seem to control the chemical composition of groundwater in the granitic region; 1) congruent dissolution of calcite at shallower depth, 2) calcite precipitation and incongruent dissolution of plagioclase at deeper depth, and 3) kaolinite-smectite or/and kaolinite-illite reaction at equilibrium at deeper depth. The behaviour of dissolved major cations (C $a^{2＋}$, $K^{＋}$, $Mg^{2＋}$, M $a^{＋}$) and silica is likely to be controlled by these reactions.

• Journal of International Academy of Physical Therapy Research
• /
• v.4 no.2
• /
• pp.573-587
• /
• 2013

The purpose of this study was conducted in order to analyze the effects of the manual intervention and self-corrective exercise models of general coordinative manipulation(GCM) on the balance restoration of spine & extremities joints with distortions and mal-alignment areas. The subjects were the members who visited GCM Musculoskeletal Prevent Exercise Center from March 1 2012 to December 31 2013 because of spine & extremities joints distortion and mal-alignments, poor posture, and body type correction. All subjects were diagnosed with the four types of the GBT diagnosis. And according to the standards of the mobility vs stability types of the upper & lower body, they were classified into Group 1(40 persons) and Group 2(24 persons). For every other day for three times a week, GCM intervention models were applied to all subjects for four weeks, adding up to 12 times in total. Then the balance restoration effects were re-evaluated with the same methods. The results are as follows. 1) Balance restoration effects of VASdp(Visual analysis scale pain & discomfort) and ER(Equilibrium reaction: ER) came out higher in GCM body type(GBT) II III IV of Group 1. 2) In case of balance restoration effects in Moire and postural evaluation areas, Group 1 was higher and cervical and scapular girdle were higher in Group 2. The balance restoration of the four GBT types was significant in all regions(p<.05), and the scapular girdle came out as high in the order of GBTII IV I. 3) In case of thoracic-lumbar scoliosis and head rotation facial asymmetric cervical scoliosis ribcage forward, the balance restoration effects of the upper body postural evaluation areas came out the highest in Group 1 and Group 2, respectively. The balance restoration effects of the four GBT types were significant in all regions(p<.05), and came out the highest in lumbar scoliosis GBTIII I, ribcage forward and thoracic scoliosis GBTII IV. 4) The balance restoration effects of the lower body postural evaluation areas came out higher in Group 1 and Group 2 for pelvis girdle deviation patella high umbilicus tilt and hallux valgus foot longitudinal arch: FLA patella direction, respectively. The balance restoration effects of the four GBT types were significant in all regions(p<.05), and came out the highest in pelvis girdle deviation GBTIII I and patella high-direction GBTIV II I. 5) The balance restoration effects between the same GBT came out significant (p<.05) in all evaluation areas and items. The conclusions of this study was the manual intervention and self-corrective exercise models of the GCM about the mal-alignment of the spine & extremities joints across the whole body indicated high balance restoration effects(p<.05) in spine & extremities joints in all evaluation areas.

• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.628-635
• /
• 1999

Direct preparative method of 2,6-diformyl-p-cresol and 2-hydroxy-3-hydroxy-5-methylbenzaldehyde from 2,6-bis(hydroxymethyl)-4-methylphenol using activated $Mn(IV)O_2$ was described. Hexadentate compartmental Iigands, $H_4L[A]\;and\; H_4L[B]$ were prepared by condensation reactions of 2-hydroxy-3-hydroxy methyl-5-methylbenzaldehyde with ethylenediamine and 1,3-diaminopropane respectively. By the reaction of macrocycle($H_4[20]DOTA$) with Ln(III) nitrate {Ln(III)=Pr, Sm, Cd, Dy }, discrete mononuclear Ln(III) complexes of the type $[Ln(H_2[20]DOTA)(ClO_4)(H_2O)]\;{\cdot}\;3H_2O$ were synthesized in the solid state. $[Ln([20]DOTA)(NO_3)(H_2O)](NO_3)_2\;{\cdot}\;xH_2O$ was placed in methanol for 2 days, and $[Ln([20]DOTA)(NO_3)(CH_3OH)]^{2+}$ was formed. The equilibrium constants(K) for the substitution of coordinated $CH_3OH$ in the Ln-[20]DOTA complexes by various auxiliary ligand, $L_a$(=salicylic acid, p-chlorobenzoic acid, benzoic acid, acetic acid, 4-bromophenol) were determined spectroscopically at 25$^{\circ}C$ and 0.1M $NaClO_4$. The K values calculated were in the order of salicylic acid > p-chlorobenzoic acid > benzoic acid > acetic acid > 4-bromophenol, while pKa of auxiliary ligands was in the opposite trend.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.2
• /
• pp.216-222
• /
• 1989

Water adsorption characteristics and lipid rancidity of fresh and roasted Peanuts were investigated at $25{\sim}60^{\circ)C$ and $11{\sim}85%$ relative humidity. peanuts of 50g were reached to the equilibrium water content in 14 days at $40^{\circ}C$, in 30 days at $25^{\circ}C$, respectively, in all of the relative humidity. BET monolayer water contents were $2.19{\sim}2.69%$ in fresh peanuts and $2.47{\sim}2.67%$ in roasted ones as dry basis at $25{\sim}40^{\circ)C$. Zero order reaction rate of peroxide value(POV) were $8{\sim}21times$ lower as $0.032day^{-1}$ and $0.142day^{-1}$in fresh peanuts than those of $0.663day^{-1}$ and $1.120day^{-1}$ in roasted peanuts at water activity of 0.51, but those were showed the relatively smaller differences according to the water activity and temperature. The critical peroxide value(POV) and carbonyl value(CV) were determined as 15.0meq/kg and 4.7meq/kg at $60^{\circ}C$ $0.51a_w$ by the regression analysis between chemical and sensory evaluation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.9
• /
• pp.1663-1670
• /
• 2006

Single crystal Fe thin films were grown directly onto n-Si(111) substrates by pulsed electrodeposition. Cyclic Voltammogram(CV) indicated that the $Fe^{2+}/n-Si(111)$ interface shows a good diode behavior by forming a Schottky barrier. From Mott-Schottky (MS) relation, it is found that the flat-band potential of n-Si(111) substrate and equilibrium redox potential of $Fet^{2+}$ ions are -0.526V and -0.316V, respectively. The nucleation and growth kinetics at the initial reaction stages of Fe/n-Si(111) substraste was studied by current transients. Current transients measurements have indicated that the deposition process starts via instantaneous nucleation and 3D diffusion limited growth. After the more deposition, the deposition flux of Fe ions was saturated with increase of deposition time. from the as-deposited sample obtained using the potential pulse of 1.4V and 300Hz, it is found that Fe nuclei grows to three dimensional(3D) islands with the average size of about 100nm in early deposition stages. As the deposition time increases, the sizes of Fe nuclei increases progressively and by a coalescence of the nuclei, a continuous Fe films grow on the Si surface. In this case, the Fe films show a highly oriented columnar structure and x-ray diffraction patterns reveal that the phase ${\alpha}-Fe$ grows on the n-Si(111) substrates.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.164-175
• /
• 2000

Three compounds of Cu(II)-loaded N,N,N'-trimethylethylenediaminated Merrifield-type polymers were synthesized with yields higher than 80%, and the hydrolysis reaction rates of O-isopropylmethyl-phosphonofluoridate(GB) and O-pinacolylmethylphosphonofluoridate (GD) catalyzed by them have been surveyed. GB and GD hydrolysis by Cu(II)-loaded polymers occurs via intermediate complex mechanism where rapid equilibrium to form intermediate complex between substrate and Cu(II)-loaded polymers($K_f$) is followed by rate determining hydrolysis step($k_1$). The measured activation parameters for $k_1$ are ${\Delta}H^{\ddag}$ : $17.75{\pm}0.98kJ/mol$ ${\Delta}S^{\ddag}$ / : $-218.42{\pm}3.35J/mol$ K, $E^{\circ}_a$ : $20.22{\pm}0.98kJ/mo1$ for GB and ${\Delta}H^{\ddag}$ / : $11.16{\pm}1.15kJ/mol,$${\Delta}S^{\ddag}$ /: $-258.57{\pm}3.93J/mol$ K, $E^{\circ}_a$ : $13.64{\pm}1.15 kJ/mol$ for GD. Standard enthalpy/entropy changes corresponding to the intermediate complex formation constant $K_f$ are ${\Delta}H^{\circ}$ : $37.05{\pm}2.19 kJ/mo1,$$ {\Delta}S^{\circ}$ : $163.12{\pm}7.49 J/mol$ K and ${\Delta}H^{\circ}$ : 418.59{\pm}2.04 kJ/mol,$ ${\Delta}S^{\circ}$ : 4111.92{\pm}6.98 J/mol$ K for GB and GD, respectively, The electron push-pull mechanism by Cu(II)-loaded polymers lowers the P-F bond breaking energy(~400 kJ/mol) to less than 1/20 compared to the case in which no Cu(II)-loaded resin presents. Analysis of $K_f$ and 4k_1$ over pH=6.5~8.0 range suggest that the GB and GD hydrolysis occurs intramolecularily with $pK_a$ =7.29 for ligated $H_2O$ and $t_{1/2}$=36.9 sec, $pK_a$ = 7.06 and $t_{1/2}$=177.7 sec for GB and GD, respectively.

• Journal of Radiation Protection and Research
• /
• v.27 no.1
• /
• pp.27-35
• /
• 2002

Characteristics of Amberlite IRN 77, a cation exchange resin, and the mechanisms of its adsorption equilibria with Co(II), Ni(II), Cr(III) and Fe(III) ions were investigated for the application of the demineralizing process in the primary coolant system of a pressurized water reactor (PWR). The optimum dosage of the resin for removal of the dissolved metal ions at $200mgL^{-1}$ was 0.6 g for 100 mL solution. Most of each metal ion was adsorbed onto the resin in an hour from the start of the reaction. Each metal adsorption onto the resin could be well represented by Langmuir isotherms. However, in the case of Fe(III) adsorption, continuous formation of Fe-oxide or -hydroxide and its subsequent precipitation inhibited the completion of the equilibrium between the metal and the adsorbent Cobalt(II) and Ni(II), which have an equivalent electrovalence, were adsorbed to the resin with a similar adsorption amount when they coexisted in the solution. However, Cr(III) added to the solution competitively replaced Co(II) and Ni(II) which were already adsorbed onto the resin, resulting in desorption of these metals into the solution. The result was likely due to a higher adsorption affinity of Cr(III) than Co(II) and Ni(II). This implies that the interactively competitive adsorption of multi-cations onto the resin should be fully considered for an efficient operation of the demineralizing ion exchange process in the primary coolant system.

• Journal of Energy Engineering
• /
• v.5 no.1
• /
• pp.56-64
• /
• 1996

The objective of this investigation is to establish the rejection characteristics of caesium and cobalt from radioactive liquid waste by chemical/ultrafiltration process. An extensive experimental investigation was conducted with inactive caesium and cobalt ions, utilizing ultrafiltration stirred cell. Caesium and cobalt could be effectively removed from waste solution using copper ferrocyanide and polyarcylic acid(PAA). The rejection dependence of the caesium was found to be a function of caesiun to potassium copper ferrocyanide feed molar ratio. The binding behavior of caesium on K$_2$Cu$_3$(Fe(CN)$\sub$6/)$_2$, particles was explained in terms of a Langmuir adsorption isotherm. When Cs/K$_2$Cu$_3$(Fe(CN)$\sub$6/)$_2$molar ratio was 1.5, the removal of caesium was the most efficient. The rejection efficiency of cobalt is dependent upon various parameters such as pH, cobalt concentration and PAA concentration. The rejection behavior of cobalt was explained in term of a equilibrium model taking into account the reaction between the ligand group, the proton and the cobalt ion. At the conditions of PAA/Co ratio of 2 and pH of 5.6, the removal of cobalt was over 90%. Also, the effect of chemical addition sequence for the simultaneously removal of caesiun and cobalt was discussed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.11
• /
• pp.1721-1728
• /
• 2018

Objective: The use of genetic markers can help to enhance reproduction in cattle, which is a very important trait for profitability in dairy production systems. This study evaluated the association between genotypes of leptin (LEP), toll-like receptor 4 (TLR4), and chemokine receptor of interleukin 8 C-X-C motif (CXCR1) genes and fertility traits in Czech Fleckvieh cattle. Methods: Phenotypic data from 786 Czech Fleckvieh cows raised on 5 farms in the Czech Republic were used, along with information from the 1st three parities. To determine genotype, the polymerase chain reaction-restriction fragment length polymorphism method was used. Results: Except for LEP g.-963C>T, all studied genotype frequencies of single nucleotide polymorphisms (SNPs) were distributed according to the Hardy-Weinberg equilibrium. Two LEP SNPs (g.-963C>T and c.357C>T) were associated with the age at the 1st calving, days open (DO), pregnancy rate after 1st service (PR), and calving interval (CLI). In LEP g.-963C>T the TT genotype heifers firstly calved 24 days earlier than CC genotype and the CT genotype cow showed a tendency for shorter DO and higher PR. In LEP c.357C>T we observed longer CLI and DO period in TT cows. In general, we can propose the TT genotype of g.-963C>T as favorable and the TT genotype of c.357C>T as unfavorable for a cow's fertility. Heterozygotes in TLR4 c.-226C>G were significantly associated with shorter CLI, and presented a nonsignificant tendency to be associated with higher PR. In CXCR1 c.777 C>G, we did not observe any relationship of this SNP with reproduction. Conclusion: Overall, the results showed that LEP could be an effective marker for improving reproduction in Czech Fleckvieh cattle. This study also provides novel insights into the relationship between TLR4 and CXCR1 SNPs and reproduction in dual-purpose cattle.