• 농업과학연구
• /
• 제49권4호
• /
• pp.813-821
• /
• 2022

The Livestock Raw Material Purchase Fund is a policy to increase the export of livestock products by providing loans to exporters of livestock products (including byproducts). The policy started in 2015 and the annual budget is about 26 billion won. However, a quantitative evaluation of policy effects has not yet been made. Therefore, in this study, the economic surplus of the policy was analyzed using the equilibrium displacement model (EDM). From the results of the welfare analysis, from 2016 to 2019, producer surplus in the chicken and duck market increased by KRW 70.9 billion, while consumer surplus decreased by KRW 70 billion. In other words, the total economic surplus of the chicken and duck market increased by about one billion won during the same period due to the increase in export demand according to the policy. Therefore, the Livestock Raw Material Purchase Fund can be viewed as a policy to maintain and increase export demand for export livestock products and to improve the economic surplus of the livestock product market. Also, since the policy is based on loans, it does not place a burden on the government's finances. Therefore, this policy should continue in the future.

• Geomechanics and Engineering
• /
• 제6권6호
• /
• pp.561-575
• /
• 2014

Estimating seismic displacements has a great importance for foundations on or adjacent to slope surfaces. However, dynamic solution of the problem has received little attention by previous researchers. This paper presents a new analytical model to determine seismic displacements of the shallow foundations adjacent to slopes. For this purpose, a dynamic equilibrium equation is written for the foundation with failure wedge. Stiffness and damping at the sliding surface are considered variable and a simple method is proposed for its estimation. Finally, for different failure surfaces, the calculated dynamic displacement and the surfaces with maximum strain are selected as the critical failure surface. Analysis results are presented as curves for different slope angles and different foundation distances from edge of the slope and are then compared with the experimental studies and software results. The comparison shows that the proposed model is capable of estimating seismic displacement of the shallow foundations adjacent to slopes. Also, the results demonstrate that, with increased slope angle and decreased foundation distances from the slope edge, seismic displacement increases in a non-linear trend. With increasing the slope angle and failure wedge angle, maximum strain of failure wedge increases. In addition, effect of slope on foundation settlement could be neglected for the foundation distances over 3B to 5B.

• 산업기술연구
• /
• 제21권B호
• /
• pp.205-212
• /
• 2001

This paper is experimental and numerical research about the sliding behavior of cantilever retaining walls resisting surcharge loads. In experimental research, centrifuge model tests at the lg and 40 g-level were performed by changing the location of model footing and its width. Bearing capacity of model footing and characteristics of load-settlement and load-lateral displacement of retaining wall were investigated. Test results of bearing capacity were compared with modified jarquio method, based on the limit equilibrium method with elasticity theory. For the numerical analysis, the commericially available program of FLAC was used by implementing the hyperbolic constitutive relationships to compare with test result about load-settlement and load-displacement of retaining wall, bearing capacity of strip footing.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.467-470
• /
• 1999

An analytical method based on the nonlinear layered finite element method is developed to simulate overall load-deflection behavior of bonded and unbonded prestressed concrete beams. The model which uses rather advanced numerical technique for iterative convergence to equilibrium can be regarded as superior one compared to the models mainly based on either load control or displacement control methods. Model predictions were compared with preceding experimental results and it was observed that there were good agreements between them.

• Steel and Composite Structures
• /
• 제18권5호
• /
• pp.1119-1127
• /
• 2015

A finite-element model for beams with partially delaminated layers is used to investigate their behavior. In this formulation account is taken of lateral strains and the first-order shear deformation theory is used. Both displacement continuity and force equilibrium conditions are imposed between the regions with and without delamination. Numerical results of the present model are presented and its performance is evaluated for static and dynamic problems.

• 한국안광학회지
• /
• 제10권3호
• /
• pp.173-184
• /
• 2005

각막과 콘택트렌즈 사이의 눈물 층에는 모세관 작용에 따른 장력이 발생하고, 순목 결과 렌즈가 평형위치에서 벗어나게 되면 렌즈의 상/하 또는 좌/우의 눈물 층의 간격이 변하며 이 간격 변화에 의해 복원력이 발생한다. 이 복원력과 눈물 층의 정성 저항력에 의해 렌즈는 진폭이 감소하는 진동을 하면서 평형위치로 복귀하게 된다. 순목 시 안검작용에 의해 렌즈가 일정한 위치로 편위 되었다고 설정할 때 순목 종료 후 매 순간 렌즈의 위치를 예측할 수 있는 미분방정식과 그 수치계산 프로그램 모델을 수립하였다. 이 컴퓨터 모델을 사용하여 렌즈의 BC, 직경, 초기 위치, 무게 등이 감쇄진동에 미치는 영향을 모사하였다. 순목 후 렌즈의 평형 위치로의 귀환은 순목 시간이 적절한 경우에는 순목 종료 직후의 렌즈 위치 및 직경에 그다지 영향을 받지 않고 빠르게 이루어지지만 렌즈의 BC가 지나치게 크거나, 무게가 큰 경우에는 렌즈 진동이 급격히 느려지기 때문에 평형 위치로 되돌아오는데 시간이 많이 걸리게 될 것이다.

• 제어로봇시스템학회논문지
• /
• 제4권6호
• /
• pp.713-721
• /
• 1998

In this paper a new modeling and an optimal pole-placement control for the suspension system of Macpherson type are investigated. The rotational motion of the unsprung mass is emphasized in the new modeling. The two generalized coordinates selected in the new model are the vortical displacement of sprung mass and the angular displacement of control arm. Both variables are measured from their static equilibrium points. It is shown that the conventional model is a special case of the new model since the transfer function of the new model coincides with that of the conventional one if the lower support point of the shock absorber is located at the mass center of the unsprung mass. It is also shown that the resonance frequencies of the new model agree better with experimental results. Therefore, the new model is more general in the sense that it Provides an extra degree of freedom in determining the plant model for control system design. An optimal pole-placement control which combines LQ control and pole-placement technique is applied to the new model. Simulations are provided.

• Steel and Composite Structures
• /
• 제6권4호
• /
• pp.319-333
• /
• 2006

A rectangular plate made of a porous material is the subject of the work. Its mechanical properties vary continuously on the thickness of a plate. A mathematical model of this plate, which bases on nonlinear displacement functions taking into account shearing deformations, is presented. The assumed displacement field, linear geometrical and physical relationships permit to describe the total potential energy of a plate. Using the principle of stationarity of the total potential energy the set of five equilibrium equations for transversely and in-plane loaded plates is obtained. The derived equations are used for solving a problem of a bending simply supported plate loaded with transverse pressure. Moreover, the critical load of a bi-axially in-plane compressed plate is found. In both cases influence of parameters on obtained solutions such as a porosity coefficient or thickness ratio is analysed. In order to compare analytical results a finite element model of a porous plate is built using system ANSYS. Obtained numerical results are in agreement with analytical ones.

• 대한기계학회논문집A
• /
• 제40권12호
• /
• pp.1077-1085
• /
• 2016

선형 롤러베어링은 하중이 크고 정밀성이 요구되는 이송장치를 지지하기 위해 광범위하게 사용되는 기계요소이다. 본 논문에서는 외력을 받는 선형 롤러베어링의 변위를 계산하기 위한 새로운 모델링 방법을 제시하였다. 먼저 LM 블록을 강체로 가정하여 롤러와 LM 블록의 지배방정식을 유도하였고 Newton-Raphson법을 이용해 계산하였다. 롤러와 레이스 사이의 접촉하중은 롤러의 형상을 고려하여 슬라이싱 기법을 이용하여 계산하였다. 강체 LM 블록 모델에 의해 계산된 접촉하중을 활용하여 LM 블록의 구조적 변형을 유한요소 모델로부터 계산하였다. 최종적인 변위는 강체 LM 블록을 가정한 모델로부터 계산된 변위와 LM 블록 구조해석 결과를 조합하여 도출하였다. 제안된 방법에 의한 결과와 베어링 제작 업체 프로그램 결과와의 비교를 통해 제안된 방법을 검증하였다.

• 한국안광학회지
• /
• 제9권1호
• /
• pp.145-159
• /
• 2004

순목(blinking)에 따른 콘택트 렌즈의 운동을 예측할 수 있는 수학적인 모델과 컴퓨터 수치 해석프로그램을 안검(eyelid)의 가속도, 안검-콘택트 렌즈 사이의 미끄럼 마찰력 등을 고려한 운동(회전) 방정식으로부터 도출하였다. 순목시 안검에 의한 콘택트 렌즈의 운동은 안검이 콘택트 렌즈를 누르는 압력, 순목에 소요되는 시간, 콘택트 렌즈의 직경 등 인자에 영향을 받으며, 프로그램 결과로부터 콘택트 렌즈의 피팅에 중요한 요소인 순목 직후 평형 상태에서 이탈된 콘택트 렌즈의 위치에 대한 예측이 가능하였다. 순목 시간이 짧을수록, 콘택트 렌즈의 직경이 클수록 렌즈의 평형 이탈 거리는 크게 증가하였다. 안검의 압력 증가는 콘택트 렌즈 직경이나 순목 시간에 비해 그 영향은 미미하였다. 순목 후 콘택트 렌즈의 각막위 평형 위치로의 귀환은 순목 시간이 적절한 경우에는 순목 종료 직후의 렌즈 위치에 그다지 영향을 받지 않고 빠르게 이루어지지만 콘택트 렌즈의 직경이 큰 경우에는 렌즈 진동이 급격히 느려지기 때문에 평형 위치로 되돌아오는데 시간이 많이 걸리게 될 것이다. 따라서 직경이 대단히 큰 콘택트 렌즈를 착용한 상태에서 순목 시간이 짧은 경우에는 다음 순목때까지 콘택트 렌즈는 평형 위치에 자리잡지 못하는 결과가 발생하여 순목이 계속됨에 따라 영구 고착 등 현상이 발생할 수도 있을 것이다.