• 지역연구
• /
• 제13권2호
• /
• pp.45-54
• /
• 1997

A regional economy is characterized as a spatial economy. However the literature shows that it has been treated as a point economy since space is little recognized in regional modeling due to mathematical complication. This leads to the fact that regional model does not sufficiently represent regional characteristic. This paper attempts to construct a regional growth model in a partial equilibrium framework specifically taking into consideration land as a primary factor. The model is formulated largely neoclassical. Labor is assumed to move in response to differences in the wage rate, while capital is perfectly mobile across regions. The paper shows that two growth equilibrium points exist, one stable equilibrium point and the other unstable equilibrium point. The unstable growth equilibrium indicates the existence of minimum threshold that a region must overcome the minimum threshold to grow constantly. Consequently, directions of regional growth are characterized by two growth paths depending on the initial condition of a region. That is to say, a region below the minimum threshold is converging toward the lower stable equilibrium point over time. When a regional economy initially lies above the minimum threshold, it will grow forever. A regional economy is not thus necessarily converging a stationary is not thus necessarily converging a stationary equilibrium point through factor movement. Finally, the impacts of the presence of agglomeration economies and diseconomies are analyzed through the phase diagram. The paper also shows that agglomeration economies result in lowering the minimum threshold and in escalating the level of stable equilibrium However, when agglomeration diseconomies prevail, the results are opposite, i.e., rising the minimum threshold of growth and lowering the growth level of stable equilibrium.

• 한국표면공학회지
• /
• 제50권2호
• /
• pp.131-139
• /
• 2017

본 기술해설은 일본의 표면 처리 학술지인 표면기술(表面技術) (2013년, 64권 2호)에 게재된 'Eh-pH 도표의 표면기술에의 응용'이라는 제하의 총 6편의 논문으로 구성된 소특집 중 두 번째인 '전위-pH 도표를 이용한 금속 나노입자 형성 프로세스 구축' 논문을 소개한 것으로서, 원문을 읽고 싶다면 표면기술(表面技術)을 참조하길 바란다.

• 연구논문집
• /
• 통권27호
• /
• pp.183-200
• /
• 1997

We have calculated the energy of three distinct grain configurations, namely completely connected, partially connected and unconnected configurations, evolving during a spheroidization of polycrystalline thin film by extending a geometrical model due to Miller et al. to the case of spheroidization at both the surface and film-substrate interface. "Stabilitl" diagram defining a stable region of each grain configuration has been established in terms of the ratio of grain size to film thickness vs. equilibrium wetting or dihedral angles at various interface energy conditions. The occurrence of spheroidization at the film-substrate interface significantly enlarges the stable region of unconnected grain configuration thereby greatly facilitating the occurrence of agglomeration. Complete separation of grain boundary is increasingly difficult with a reduction of equilibrium wetting angle. The condition for the occurrence of agglomeration differs depending on the equilibrium wetting or dihedral angles. The agglomeration occurs, at low equilibrium angles, via partially connected configuration containing stable holes centered at grain boundary vertices, whereas it occurs directly via completely connected configuration at large equilibrium angles except for the case having small surface and/or film-substrate interface energy. The initiation condition of agglomeration is defined by the equilibrium boundary condition between the partially connected and unconnected configurations for the former case, whereas it can, for the latter case, largely deviate from the equilibrium boundary condition between the completely connected and unconnected configurations because of the presence of a finite energy barrier to overcome to reach the unconnected grain configuration.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1836-1843
• /
• 2007

In this paper, we study the NvBAT treatment for AIDS patients that is combined with PI rather than RTI, while the Previous results have been focused on the NvBAT in conjuction with RTI. To this end, we obtain a bifurcation diagram which shows a change in the equilibrium points, and in their stability properties as the PI drug effect is varied. Based on the bifurcation diagram, we show that the NvBAT can be combined with drug PI for the treatment of AIDS patients. Various computer simulation results are included, which show the superiority of the NvBAT with PI over that with RTI. Accordition to simulation result, the NvBAT combined with PI is able to keep virus load level lower than that combined with RTI, which is crucial to avoid the emergence of drug-resistant mutants. Moreover, it is shown that, for some AIDS patients, NvBAT with RTI cannot make patients into long term non-progressor, while NvBAT with PI can.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.172-175
• /
• 2009

The purpose of this study is to predict the forming limit diagram (FLD) of strain-rate sensitive materials on the basis of the Marciniak and Kuczynski (M-K) theory. The strain-rate effect is taken into consideration in such a way that the stress-strain curves for various strain-rates are inputted into the formulation as point data, not as curve-fitted models such as power function. To solve the nonlinear system of equations derived from the equilibrium and constraints in the groove region and the safe zone, the Newton-Raphson method is used. The theoretical FLDs using four different yield criteria, that are von Mises, Hill (1948), Hill (1979), Logan and Hosford, are compared with the experimental, numerical (FEA) and other theoretical results. A new trial is made where a modified M-K model having n-step grooves is introduced to describe a real localized neck.

• 한국항해항만학회지
• /
• 제35권7호
• /
• pp.575-580
• /
• 2011

It is important to understand the trajectory of structure in launching process because of the short time of launching process may result in unexpected accidents or damage to structures. The high risk of structural failure is not avoidable without the fully comprehension of changing forces in launching procedure. The commercial software can evaluate the motion of launching event in calm water condition but there is the limitation of research application because of the programmed commercial software. The launching process of the spar hull is suggested with stage concept that is divided into 10 stages in time domain. A force equilibrium diagram is derived for each stage where the changes of force vector and motion characteristics take place. In particular, the effects of changes in buoyancy and drag force due to the progressive submergence of the spar hull are taken into account by means of a touch length concept. The results contained in this paper provide the valuable information of the trajectory motion evaluation with suggested methods in spar launching process with sliding barge. Furthermore, the presented stage concept and touch length concept will provide basic knowledge for understanding launching process and help to develop further research area for launching analysis.

• 열처리공학회지
• /
• 제24권5호
• /
• pp.262-270
• /
• 2011

Carbide precipitation and dissolution behavior at various temperatures during heat treatment has been studied in STD11 cold working die steel through confocal scanning laser microscopy; dilatometry; and X-ray diffraction analysis. The equilibrium phase diagram and phase fractions with temperature were calculated using a FactSage program. Confocal laser microscopic observation revealed that ${\alpha}$ to ${\gamma}$ transformation temperature is near $800^{\circ}C$; M7C3 carbides melt at $1245^{\circ}C$; and the melting temperature of STD11 is near $1370^{\circ}C$. XRD results indicated that the M23C6 carbides dissolve in the matrix if austenitized at over $1030^{\circ}C$; while the M7C3 carbides remain up to $1200^{\circ}C$ although their amount decreases. The calculated equilibrium phase diagram showed good agreement with experimental results on carbide dissolution and phase transformation temperatures.

• 자원리싸이클링
• /
• 제17권3호
• /
• pp.29-34
• /
• 2008

이온강도가 센 염산용액에서 Alamine336과 TBP에 의한 염화 제 2철의 용매추출거동을 MaCabe-Thiele도를 이용하여 비교하였다. 초기 추출조건으로부터 수상과 유기상에서 철의 평형농도를 계산하여 두 추출제에 의한 철 추출의 등온추출곡선을 구했다. 평형농도 계산시 수상에서 착물형성반응과 물질수지 및 추출반응을 고려하였다. 1M의 Aalmine336으로 0.5M의 철을 3M의 염산용액에서 수상과 유기상의 부피비가 6/5인 조건에서 추출시 2단에 철의 대부분이 유기상으로 추출되는 것을 MaCabe-Thiele도에서 알 수 있었다. 1M의 Alamine336은 염산용액에서 철의 추출능력면에서 TBP 2-3M과 비슷하였다. MaCabe-Thiele도와 두 추출제의 물리적 특성으로부터 Alamine336이 TBP보다 염산용액에서 철의 추출특성이 우수한 것을 알 수 있었다.

• 대한화학회지
• /
• 제67권1호
• /
• pp.54-63
• /
• 2023

이 연구에서는 2015 개정 교육과정 화학II 교과서 6종을 대상으로 상평형 그림의 조건, 정의, 임계점의 표시 유무와 실생활 예시 등을 분석하였다. 본 연구에서는 여러 선행 연구에서 지적한 문제점들이 2015 개정 교육과정 화학II 교과서에 반영되고 있지 않음을 확인했으며, 상평형 그림이 그려지는 조건이 명시되지 않은 것과, 상평형 그림을 정의하는 상황이 증기압력을 정의하는 상황과 동일한 것, phase diagram을 상평형 그림으로 번역한 것, 상(phase)과 상태(state)의 구분이 불분명한 것, 임계점을 상평형 그림에서 나타내지 않은 것, 실생활 예시를 매우 한정적으로 제시하고 있는 것 등을 문제로 제안하였다. 따라서 앞으로 이루어질 개정 교육과정 화학II 교과서에서는 여러 선행 연구들의 결과를 반영하는 것이 필요하며, 상평형 그림이 그려지는 조건을 명시하고, 상평형 그림을 정의하는 상황을 새로이 모델링하고, phase diagram을 상 도표라는 용어로 번역하고, 상과 상태의 구분을 명확히 하고, 상평형 그림에서 임계점을 표시하며 다양한 실생활 사례를 개발할 필요가 있다.

• 한국물환경학회지
• /
• 제30권2호
• /
• pp.175-183
• /
• 2014

The influence of temperature on the treatment efficiency of chlorinated organic substances contained in groundwater by permeable reactive barrier which is composed of $Fe^{\circ}$ has been investigated by constructing the Pourbaix diagrams for Fe-$H_2O$ system at different temperatures based on thermodynamic estimation. In aerobic condition, the equilibrium potentials for $Fe^{\circ}/Fe^{2+}$ and $Fe^{2+}/Fe^{3+}$ were observed to increase, therefore, the dechlorination reaction for organic pollutants by $Fe^{\circ}$ was considered to decline with temperature due to the diminished oxidation of reactive barrier. The result for the variations of the ionization fraction of $Fe^{2+}$ and $Fe^{3+}$ ion in the pH range of 0 ~ 2.5 obtained by employing Visual MINTEQ program showed that the ionization fraction of $Fe^{2+}$ increased with pH, however, that of $Fe^{3+}$ decreased symmetrically and the extent of the variation of ionization fraction for both ions was raised as temperature rises. The equilibrium pH for $Fe^{3+}/Fe(OH)_3$ was examined to decrease with temperature so that the treatment efficiency of chlorinated organic substance was expected to decrease with temperature due to the enhanced formation of passivating film in aerobic condition. The change of the reactivity of a specific chemical species with temperature was defined quantitatively based on the area of its stable region in Pourbaix diagram and depending on this the reactivity of $Fe^{3+}$ was shown to decrease with temperature, however, that of $Fe(OH)_3$ was decreased monotonously as temperature is raised for $Fe^{3+}/Fe(OH)_3$ equilibrium system. In anaerobic condition, the equilibrium potential for $Fe^{\circ}/Fe^{2+}$ was observed to rise and the equilibrium pH for $Fe^{2+}/Fe(OH)_2$ were examined to decrease as temperature increases, therefore, similar to that for aerobic condition the efficiency of the dechlorination reaction for organic substances was considered to be diminished when temperature rises because of the reduced oxidation of $Fe^{\circ}$ and increased formation of $Fe(OH)_2$ passivating film.