• Geomechanics and Engineering
• /
• v.15 no.4
• /
• pp.997-1004
• /
• 2018

The brine leakage is a tough problem in artificial freezing engineering. This paper takes the common soft clay in Wujiang District as the study object, and calcium chloride solutions with six salinity levels were considered. The 'classic' cooling curve method was employed to measure the freezing point of specimens after freeze-thaw. Results indicate that four characteristic stages can be observed including supercooling, abrupt transition, equilibrium and continual freezing, strongly dependent on the variation of unfrozen water content. Two characteristic points were found from the cooling curves, i.e., freezing point and initial crystallization temperature. A critical value for the former exists at which the increment lowers. The higher the saline content approximately linearly, lower the freezing point. In the initial five cycles, the freezing point increases and then stabilizes. Besides, the degree of supercooling was calculated and its correlations with water, salt and freeze-thaw cycles were noted. Finally, an empirical equation was proposed for the relationship of freezing point and three main factors, i.e., water content, saline content and freeze-thaw cycles. Comparison of calculated and measured data proves that it is reliable and may provide guidance for the design and numerical analysis in frozen soil engineering.

• The Journal of the Korea Contents Association
• /
• v.13 no.10
• /
• pp.226-233
• /
• 2013

This study examines determinants of film consumption. Using structural equation modelling, this study explores some factors that explained film consumption based on film tastes and information seeking and socio-demographic factors. The major results are as follows: firstly, the major factor for explaining film consumption was individual tastes for films. The higher the degree of tastes for films, the greater the degree of film consumption. Secondly, there were significant relationships between tastes for films and film related information seeking such as internet search behavior and the use of film blogs. More specifically, the use of film blogs partially explained the degree of film consumption. Thirdly, a demographic factor like gender was highly correlated to film consumption. However, an income factor was not correlated to fim consumption. In conclusion, the degree of film consumption was determined by tastes for flims, the use of film blogs and gender factors.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.533-538
• /
• 1991

In the design and operation of robot arms with flexible links, the equations of motion are required to exactly model the interaction between rigid motion and elastic motion and to be formulated efficiently. Thus, the flexible link is represented on the basis of the D-H rigid link representation to measure the elastic deformation. The equations of motion of robot arms, which are configured by the generalized coordinates of elastic and rigid degrees of freedom, are formulated by using F.E.M. to model complex shaped links systematically and by eliminating elastic mode of higher order that does not largely affect motion to reduce the number of elastic degree of freedom. Finally, presented is the result of simulation to flexible robotic arm whose joints are controlled by direct or PD control,

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.201-206
• /
• 2003

This study is test for STS304 specimen using bending and torsion state. Rounded specimen and notched specimen including fracture surface investigation was comparatively experimented, fatigue life according to degree of surface finishing was examined. Fatigue fracture probability of notched canilever specimens were predicted by P-S-N curve, median rank and Weibull distribution. And at the relation with the rotational speed and stress, the fatigue life of the test specimen was higher at high speed than low speed If summarize STS304 torsion result of fatigue test, is as following. Fatigue life prediction was available by Weibull statistics distribution, and 50% breakdown probability correlation equation was appeared as following.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.20 no.4
• /
• pp.295-308
• /
• 2016

We propose a projection-based analysis of a new hybridizable discontinuous Gale-rkin method for second order elliptic equations. The method is more advantageous than the standard HDG method in a sense that the new method has higher-order accuracy and lower computational cost, and is more flexible. Notable distinctions of our new method, when compared to the standard HDG emthod, are that our method uses $L^2$-projection and suitable stabilization parameter depending on a mesh size for superconvergence. We show that the error for the solution of the equation converges with order p + 2 when we only use polynomials of degree p + 1 as a finite element space without postprocessing. After establishing the theory, we carry out numerical tests to demonstrate and ensure that the proposed method is effective and accurate in practice.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.142-147
• /
• 2000

An overhead crane system which transports an object by girder motion, trolley motion, and hoist motion becomes a nonlinear system because the length of a rope changes. To develope the position control algorithm for the nonlinear crane systems, we apply a nonlinear optimal control method which uses forward and backward difference methods and obtain optimal inputs. This method is suitable for the overhead crane system which is characterized by the differential equation of higher degree and swing motion. From the results of computer simulation, it is founded that the position of the overhead crane system is controlled, and the swing of the object is suppressed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.1
• /
• pp.1-10
• /
• 1993

In this paper, the effects of free surface fluctuation on the dynamic response of offshore structure is studied. In order to make the mathematical treatment of problem more tractable, only a single degree of freedom system subjected a long crested, stationary, Gaussian, non-breaking random waves of arbitrary bandwidth is considered. Wave force is computed based on the Morison equation in which wave induced fluid particle velocity and acceleration are modified to account for the effect of intermittent submergence of structural members near the free surface. It is shown that the response spectrum is reduced and higher harmonic response component appears when the intermittent submergence of structural member is considered. Furthermore, it is also found that the amount of reduction in the response spectrum is getting smaller as frequency is increased which might be attributed to the higher harmonic component caused by intermittent submergence and these effects are getting profound as water depth is decreased.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.2
• /
• pp.8-30
• /
• 2018

The purpose of this study was to investigate the relationship between empowering leadership, directive leadership, safety communication, and safety behavior. Also, we examined whether safety motivation had a moderated mediating effect on this relationship. We collected the surveys from 343 combat pilots of the Republic of Korea Air Force for the analysis. Our structural equation modeling analysis revealed that there was a positive relationship between empowering leadership and safety behavior, and safety communication fully mediated the relationship. However, there is no relationship between directive leadership and safety behavior. Also, our results showed that safety motivation moderated the relationship between empowering leadership and safety communication, but not the relationship between directive leadership and safety communication. Furthermore, the relationship between empowering leadership and safety behavior through safety communication varied significantly with the degree of safety motivation, such that the higher the safety motivation, the higher the impact of empowering leadership on safety behavior through safety communication. Finally, we discussed the implications of these results, study limitations, and practical suggestions for future research.

• Journal of the Korean Society of Tobacco Science
• /
• v.23 no.2
• /
• pp.149-155
• /
• 2001

This study was carried out to evaluate the correlations among degree of carbonization, chemical components and chromatic characteristics, and to establish the criterion of carbonizaion in leaf tobacco during aging storage. The flue-cured (B2O) and burley (B2T) leaf tobaccos were redried with conventional practices for each other type, and moisture contents of leaf tobaccos were adjusted to 13, 15, 17 and 19% after redrying. The leaf tobaccos were packed in carton box and stored for 8 months in the controlled-environment rooms($35^{\circ}C$, 65% R.H. and $40^{\circ}C$, 80% R.H.). Degree of carbonization, chemical components, and chromatic characteristics(L ; black-white, a ; red to green, b ; yellow to blue) were invetigated every month. Carbonization Index (C.I.) was established as (equation omitted) in accordance with degree of carbonization in two types. The C.I. value of flue-cured leaf(56.5) for slight carbonization was higher than that of burley leaf(48.0). C.I. and rate of usable leaf, L and b were positively correlated in two types. C.I. was significantly shown positive correlation with pH in two types. The correlations between the predicted and the observed values of slight carbonizating times(month after storage) using C.I. and pH were positive significant in two types. The results suggest that cabonization index may be useful to forecast and prevent the carbonization, and pH may be useful to estimate cabonization indirectly for flue-cured and burley leaves during aging storage.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.939-946
• /
• 1997

Effects of moisture content on the gelatinization and recrystallization of non-waxy and waxy rice starch gels were investigated by differential scanning calorimetry (DSC). The recrystallization rates of the starch gels containing various moisture contents $(40{\sim}70%)$ were analyzed by Avrami equation. The waxy rice starch had higher gelatinization temperature and enthalpy than non-waxy one. The highest degrees of recrystallization in both rice starch gels stored at $4^{\circ}C$ were shown at 40%, and recrystallizations above 80% moisture content were not found. The degree of recrystallization of waxy one was higher than that of non-waxy one in the range of 40 to 60% moisture content. The Avrami exponents (n) of both rice starch gels were near to 1.0 and the time constant (1/k) was increased with increasing moisture content in the range of 40 to 70% moisture content. The recrystallization rate of waxy rice starch gel was slower than that of non-waxy one. The recrystallization of rice starch gels could be explained by the change of ice melting enthalpy during storage. The Wg's, represented the maximum practical amount of plasticizing water, were about 29.9% and 28.2% for non-waxy and waxy rice starch gels, respectively.