• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.4
• /
• pp.1-8
• /
• 2008

In orthogonal frequency division multiplexing (OFDM) system the time selectivity of wireless channel introduces intercarrier interference (ICI), which degrades system performance in proportion to Doppler frequency. To mitigate the ICI effect, we can generally employ a classical zero-forcing (ZF) equalizer. However, the ZF scheme requires an inverse of a large matrix, which results in prohibitively high computational complexity. In this paper, we propose a low complexity ZF equalization scheme for suppressing the ICI caused by highly time-varying channels in OFDM systems. From the fact that the ICI on a subcarrier is mainly caused by several neighboring subcarriers, the proposed scheme exploits a numerical approximation for matrix inversion based on Neumann's Series (truncated second order). To further improve performance, the partial ICI cancellation technique is also used with reduced complexity. Complexity analysis and simulation results show that the proposed scheme provides the advantage of reducing computational complexity significantly, while achieving almost the same performance as that of the classical ZF a roach.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.11
• /
• pp.961-971
• /
• 2012

This article is concerned with effective numerical techniques for partial differential equation (PDE)-based image restoration. Numerical realizations of most PDE-based denoising models show a common drawback: loss of fine structures. In order to overcome the drawback, the article introduces a new time-stepping procedure, called the method of nonflat time evolution (MONTE), in which the timestep size is determined based on local image characteristics such as the curvature or the diffusion magnitude. The MONTE provides PDE-based restoration models with an effective mechanism for the equalization of the net diffusion over a wide range of image frequency components. It can be easily applied to diverse evolutionary PDE-based restoration models and their spatial and temporal discretizations. It has been numerically verified that the MONTE results in a significant reduction in numerical dissipation and preserves fine structures such as edges and textures satisfactorily, while it removes the noise with an improved efficiency. Various numerical results are shown to confirm the claim.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.413-415
• /
• 2008

The charge equalizer design for a series connected battery string is very challenging because it needs to satisfy many requirements such as implementation possibility, equalization speed, equalization efficiency, controller complexity, size and cost issues, voltage and current stress, and so on. Numerous algorithms and circuits were developed to meet the above demands and some interesting results have been obtained through them. However, for a large number of cells, for example, eighty or more batteries, the previous approaches might cause problems. Such problems include long equalization time, high controller complexity, bulky size, high implementation cost, and high voltage and current stress. To overcome these circumstances, this paper proposes a charge equalizer design method based on a battery modularization technique. In this method, the number of cells that we consider in an equalizer design procedure can be effectively reduces; thus, designing a charge equalizer becomes much easier. Furthermore, by applying the previously verified charge equalizers to the intramodule and the outer-module, we can obtain easy design of a charge equalizer and good charge balancing performance. Several examples and experimental results are presented to demonstrate the usefulness of the charge equalizer design method.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.2
• /
• pp.155-167
• /
• 2015

An adaptive equalization scheme based on all-digital jitter measurement is proposed for a continuous time linear equalizer (CTLE) preceding a clock and data recovery (CDR) in a receiver circuit for high-speed serial interface. The optimum equalization coefficient of CTLE is determined during the initial training period based on the measured jitter. The proposed circuit finds automatically the optimum equalization coefficient for CTLE with 20", 30", 40" FR4 channel at the data rate of 5 Gbps. The chip area of the equalizer including the adaptive controller is 0.14 mm2 in a $0.13{\mu}m$ process. The equalizer consumes 12 mW at 1.2 V supply during the normal operation. The adaptive equalizer has been applied to a USB3.0 receiver.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.273-279
• /
• 1998

In this paper, the proposed charging system consists of step charging mode and time-sharing equalization charging mode. As $\Delta$V=O point is detected, the proposed cut-off method will selectively cut off the only battery to reach the $\Delta$V=O point, preventing serial-connected batteries from undercharging. In the start of each step, the equalization charging mode is performed to reduce the capacity difference among the batteries. Though it is added to simple circuit for selective cut-off, comparing with recently used step-charging method, this system can improve the life cycle of battery and charging efficiency, and be also very effective for preventing the batteries from overcharging and undercharging.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2005.11a
• /
• pp.77-80
• /
• 2005

본 논문에서는 ATSC 지상파 디지털 TV 방송방식을 사용하는 등화형 동일채널 중계기(Equalization Digital On-Channel Repeater: EDOCR)에서의 신호처리 시간지연을 최소화하기 위한 전치등화 방법에 대하여 기술하고 결과를 다양한 각도에서 분석한다. 제안된 전치등화 방법은 기준신호인 기저대역 신호와 복조된 중계기 출력신호를 이용하여 전치등화필터계수를 계산하고 펄스성형필터계수와의 컨볼루션을 통해 얻어진 새로운 펄스성형필터를 이용하는 것이다. 새로운 펄스성형필터의 전치 탭 수를 조절함으로써 시간지연을 최소화하고, 마스크필터에 의한 선형왜곡을 보상할 뿐 아니라, 원래 펄스성형필터의 대역 외 방사 특성의 열화를 최소화할 수 있다. 이를 컴퓨터 시뮬레이션 및 제작된 전치등화기를 이용하여 검증하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1125-1132
• /
• 2010

WiBro(Wireless Broadband Internet) is the standard of high-speed portable internet based on OFDMA/TDD (Orthogonal frequency division multiple access / Time division duplexing) techniques, and the subset of consolidated version of IEEE802.16e Wireless MAN standard. In this paper, we propose performance improvements of WiBro system using the 64QAM SOFM(Self-Organizing Feature Maps)prefiltering. Proposed method used the prefiltering SOFM neural network blind equalization in the Broadband 64 QAM WiBro system receiver. The prefiltering SOFM neural network constellates 64QAM that is transmitter data shape and the blind equalization removes ICI(Inter Carrier Interference). To verificate the proposed method usability, the MSE and the BER are simulated. The simulation results shown that is improved the performances of the proposed WiBro system using the 64QAM SOFM Prefiltering than the existing WiBro system.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.401-402
• /
• 2015

In this paper a direct cell-to-cell charge balancing circuit which can transfer the charge from any cell to any cell in the battery string is introduced. In the proposed topology the energy in the high voltage cell is transferred to the low voltage cell through the simple operation of a dc-dc converter to get fast equalization. Furthermore, the charge equalization can be performed regardless of the battery module operation whether it is being charged, discharged or relaxed. The monitoring circuit composed of a DSP and a battery monitoring IC is designed to monitor the cell voltage and protect the battery. In order to demonstrate the advantages of the proposed topology, a prototype circuit was designed and applied to 12 Lithium-Ion battery module. It has been verified with the experiments that the charge equalization time of the proposed method was shortest compared with those of other methods.

• International Journal of Advanced Culture Technology
• /
• v.10 no.2
• /
• pp.252-259
• /
• 2022

Artificial intelligence is used in fusion with image processing techniques using cameras. Image processing technology is a technology that processes objects in an image received from a camera in real time, and is used in various fields such as security monitoring and medical image analysis. If such image processing reduces the accuracy of recognition, providing incorrect information to medical image analysis, security monitoring, etc. may cause serious problems. Therefore, this paper uses a mixture of YOLOv4-tiny model and image processing algorithm and uses the COCO dataset for learning. The image processing algorithm performs five image processing methods such as normalization, Gaussian distribution, Otsu algorithm, equalization, and gradient operation. For RGB images, three image processing methods are performed: equalization, Gaussian blur, and gamma correction proceed. Among the nine algorithms applied in this paper, the Equalization and Gaussian Blur model showed the highest object detection accuracy of 96%, and the gamma correction (RGB environment) model showed the highest object detection rate of 89% outdoors (daytime). The image binarization model showed the highest object detection rate at 89% outdoors (night).

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.6
• /
• pp.227-234
• /
• 2007

This paper describes a transmission method based on a single carrier with frequency domain equalization (SC-FDE) scheme with cyclic prefix(CP). The SC-FDE has similar features with orthogonal frequency division multiplexing(OFDM). Similar to OFDM, a SC-FDE system is computationally efficient since equalization is reformed on a block of data in the frequency domain. Especially, it has the advantage of low sensitivity to nonlinear distortion compared to OFDM. In this paper, we design a SC-FDE receiver using decision-directed method, and present simulation results.