• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.177-182
• /
• 2000

This study aims to provide an effective method to reduce construction noise generated by breakers. To reduce the breaker's noise level, a sound encloser was developed; the sound insulation's performance was tested in the field. From the field test, the following results were obtained. The sound insertion loss was about 6.5dB(A), even though part of the sound encloser for the breaker was left unclosed. This is equal to the reduction value which can be obtained by using more expensive low noise breakers, proving that there are more effective measures for sound insulation at lower cost. The characteristic of frequency was evaluated to show an even reduction through all frequency bands, except 630Hz.

• 한국전자파학회논문지
• /
• 제13권6호
• /
• pp.599-604
• /
• 2002

본 논문에서는 편광기를 부착한 차동검출기의 부하저항으로 디지털가변저항을 사용하여 잡음소거 능력을 개선하였다. 이 구조에서는 차동검출기를 구성하는 2개의 포토다이오드에서 검출된 잡음전압의 크기가 항상 동일한 값이 되도록 디지털 가변저항의 크기를 제어하여 잡음광을 소거한다. 이 방식에서는 고정된 부하저항을 사용한 구조에 비하여 신호대잡음비가 약 23 dB 더 향상되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.199-200
• /
• 2023

Eco-friendly concrete contains only 5% of cement yet achieves equal or greater strength compared to conventional concrete, reducing salt-attack impact and hydration heat by more than 30% and ensuring higher construction quality for underground structures. Furthermore, eco-friendly concrete can reduce up to 90% of carbon dioxide emissions compared to traditional concrete, enabling a reduction of approximately 6,000 tons of carbon emissions for 1,000 of apartment units construction. This is equivalent to planting around 42,000 trees

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.87-91
• /
• 2002

This paper investigates the corrosion inhibition and the reduction of hydration heat properties of Ground Granulated Blast-Furnace Slag (GGBFS) added concrete. Since the massive civil structure is vulnerable to the thermal crack by hydration. adiabatic temperature rising tests were performed for water-binder ratios from 43.2% to 47.3%, while replacing 15% to 50% of cement with GGBFS of equal weight. Then, the corrosion protection performance was evaluated using cylindrical specimens embedded with steel reinforcement according to the combination of 3 W/B ratios and 2 levels of chloride ion quantity. The corrosion area of the embedded steel ban was determined using the high pressure steam curing method specified in KS F 2561. The test results showed that the replacement of GGBFS was effective in reducing the hydration heat. The corrosion area of the embedded steel ban decreased as the replacement of GGBFS increased. However, the corrosion area of the steel bar was proportional to the autoclave cycle and the chloride ion quantity. Among the tested specimens, compressive strength, reduction of hydration heat, and corrosion inhibition performance were excellent when 50% of cement was replaced with GGBFS of equal weight.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1712-1718
• /
• 2013

This paper proposes a compact dual-band 3-way power divider that helps lowering the weight of a transceiver for the L-band or multi-purpose satellite communication. Instead of the multi stages or tapering which ends up with loss accumulation and size-growth, the non-linear dispersive phases from the metamaterial CRLH(composite right and left-handed) properties are obtained by the accurate formulation and implemented by the short transmission line segments. Firstly, the CRLH dual-band two-way unequal power divider and equal power divider are separately designed. And then, the input of the two-way equal power divider is plugged in the output port of the unequal one, and the entire geometry is slightly adjusted for the desirable performance. The circuit analysis and full-wave simulation are used to predict the frequency responses and validated by the measurement of the prototype. Besides, the size-reduction effect is addressed.

• KEPCO Journal on Electric Power and Energy
• /
• 제4권1호
• /
• pp.39-45
• /
• 2018

Ammonia Adsorbed Fly Ash (AAFA) samples produced from coal fired plants equipped with SNCR (Selective Non-Catalytic Reduction) of nitrogen oxides with urea have been chemically analyzed, and their physical and dissolution properties have been investigated. XRD results for the ammonia component in AAFA ascertained that ABS (ammonium bisulfate) and AS (ammonium sulfate) were deposited on fly ash as $SO_3$ reacted with unreacted ammonia at SNCR. SEM and EDS images showed that fine ashes on large fly ash surface of sphere type were agglomerated, due to adhesive role of ammonium salts attached fly ashes. Dissolution test results of ammonium salts absorbed on AAFA in distilled water or sea water showed that the proportion of un-ionized $NH_3$ to $NH_4{^+}$ were primarily a function of pH and temperature. Increasing pH and temperature causes an increase in the fraction of un-ionized $NH_3$. At pHs of 9.6 and 10.7, un-ionized $NH_3$ and $NH_4{^+}$ ions are present in equal amounts at distilled water and sea water, respectively.

• 전자공학회논문지SC
• /
• 제39권1호
• /
• pp.33-41
• /
• 2002

본 논문에서는 기존의 주파수하중 균형절단 기법과 주파수하중 한켈노옴 근사화 기법에 비하여 더 작은 H∞ 하중 축소오차를 가지는 새로운 알고리듬을 제시한다. 제시한 알고리듬은 제한 실 보조정리로부터 반복적인 두 단계의 선형행렬부등식 형태로 유도한다. 또한 제안한 알고리듬을 성능보장을 위한 제어기 차수축소기법에 적용한다. 수치적 예를 통하여 제안한 알고리듬의 타당성을 보이고 기존의 모델 차수축소기법과 비교 분석하며 HIMAT(highly maneuverable aircraft technology) 시스템의 예를 통하여 성능보장을 위한 제어기 차수축소 기법에 적용할 수 있음을 보인다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권1호
• /
• pp.119-125
• /
• 2016

The objective of this study was to investigate the effect of the fat reduction on the physicochemical and microbiological characteristics of fermented sausages during ripening and drying. Low fat fermented sausages were produced with different fat levels (30%, 20%, 10%, and 5%) under ripening conditions and fermented process. Samples from each treatment were taken for physicochemical and microbiological analyses on the 0, 1, 2, 3, 4, 5, 7, 10, 14, and 21st day of ripening. In proximate analysis, the fat reduction in sausages produced an increase in moisture, protein and ash contents during ripening and drying (p<0.05). The weight losses were significantly higher in high fat formulations during the first 4 days, whereas those were higher in low fat ones after 10 days of storage (p<0.05). Fat reduction was responsible for an increase in shear force values after 3 days of storage. The volatile basic nitrogen (VBN) value of the low fat samples was significantly higher (p<0.05). Low fat sausages reduced the extent of lipid oxidation. The lower fat level produced redder sausages. Total plate bacteria and Pseudomonas counts of sausages showed no significant differences. Production of low fat sausages resulted in the physicochemical and microbiological attributes equal to or better than the high fat sausages without negative effects, except only a higher VBN and weight loss.

• Carbon letters
• /
• 제8권2호
• /
• pp.120-126
• /
• 2007

The effect of cobalt precursor on the structure of Co supported multi-walled carbon nanotubes (MWCNTs) were studied by using X-ray photoelectron spectroscopy (XPS). MWCNTs were treated with a mixture of nitric and sulfuric acids and decorated with cobalt and/or cobalt oxides via aqueous impregnation solutions of cobalt nitrate or cobalt acetate followed by reduction in hydrogen. XPS was mainly used to investigate the phase of cobalt on MWCNTs after reduction with $H_2$ flow at $400^{\circ}C$ for 2 h. Higher cobalt-nanoparticle dispersion was found in the MWCNTS prepared via cobalt nitrate decomposition. A typical XPS spectrum of Co 2p showed the peaks at binding energy (BE) values equal to 781 and 797 eV, respectively. It is found that cobalt nitrate supported MWCNTs is more dispersive and have catalytic activity than that of cobalt acetate supported MWCNTs at same preparation condition such as concentration of precursor solution and reduction environment.

• 대한전자공학회논문지TC
• /
• 제42권12호
• /
• pp.117-126
• /
• 2005

본 논문에서는 OFDM 신호의 높은 PAPR(peak to average power ratio)을 저감하기 위한 기법을 제시한다. 이 기법은 OFDM 신호 생성에 사용되는 IFFT를 요즘은 디지털 신호 프로세서에서 소프트웨어로 구현하는 경우가 많다는 점에 착안하여, IFFT의 계산 과정에서 중복되는 계산을 피함으로써 계산량을 줄인다. 즉, IFFT 과정에서 서브-시퀀스(sub-sequence)를 정의하고 이 서브-시퀀스에 최적 위상 회전 요소를 곱하여 PAPR을 최소화한다. 이 기법의 PAPR 저감 성능은, 약 1/3의 계산량으로도 PTS 기법의 인터리브 분할 방식과 동일하다는 것을 보인다.