• 접착 및 계면
• /
• 제7권4호
• /
• pp.39-44
• /
• 2006

A new kind of silicone-epoxy composite is reported in this research. The silicone-epoxy resin was synthesized by the hydrosilylation of tetramethycyclotetrasiloxane and 4-vinyl-1-cyclohexene 1,2-epoxy with a high reaction yield. It was found that the obtained silicone-epoxy resin shows a high reactive activity to the aluminum complex-silanol catalyst. The resin could be cured under the catalysis of $(Al(acac)_3/Ph_2Si(OH)_2$ at a concentration below 0.1 wt% to give a hard cured resin showing excellent optical clarity, UV resistance and thermal stability. It was also found that the Si-H groups facilitated the curing reaction and the silicone-epoxy resin bearing Si-H group could be cured effectively even if $Ph_2Si(OH)_2h$ was absent. Moreover, the UV resistance and thermal stability were improved significantly by the introduction of Si-H groups. This is possibly due to the reductive property of Si-H groups which can annihilate radical and peroxide effectively. This kind of silicone-containing epoxy composite might have very promising applications as optical resin, optical adhesive and encapsulation materials for electronic devices.

• 접착 및 계면
• /
• 제25권1호
• /
• pp.162-168
• /
• 2024

The effect of maleinized polybutadiene (MPB) on the mechanical properties of epoxy resins including adhesion strength, elongation and impact peel resistance was investigated in this study, in which MPB is an anhydride-functionalized polybutadiene prepolymer. Different molecular weights (3.1K and 5.6K) of MPB were added to diglycidyl ether bisphenol-A (DEGBA), an epoxy resin, to increase its impact peel strength and elongation. At various loading percent (5, 10, 15, 20 and 25 wt%) of MPB in the epoxy resin, significant improvements of mechanical properties were observed. According to the comparative analysis results, the modified epoxy system with 15 wt% (3.1K) MPB exhibited the highest lap shear strength, about 40% higher than that of neat epoxy. The tensile strength and elongation steadily and simultaneously increased as the loading percent of MPB increased. The impact peel strengths at low (-40℃) and room (23℃) temperatures were substantially improved by MPB incorporation into epoxy resins. Reactive and flexible MPB prepolymer seems to construct strong nano-structured networks with rigid epoxy backbones without sacrificing the tensile and adhesion strengths while increasing impact resistance/toughness and elongation properties. For higher impact peel while maintaining adhesion and tensile strengths, approximately 10-15 wt% MPB loading in epoxy resin was suggested. Consequently, incorporation of functionalized MPB prepolymer into epoxy system is an easy and efficient way for improving some crucial mechanical properties of epoxy resins.

• 한국염색가공학회지
• /
• 제28권1호
• /
• pp.40-47
• /
• 2016

As a coating material for loudspeaker dampers, resilient polyurethane/epoxy hybrid resins were synthesized to replace conventional phenol resin and examined the physical properties, which are not only environmentally friendly but also not harmful to human. Five types of polyurethane resins were synthesized in the step-shot method using methylene diisocyanate, three polyols such as poly tetramethylene ether glycol(PTMEG, MW:2000), poly(1,4-buthylene adipate(PBAP, MW:2000), and poly carbonatediol(PCD, MW:2000), and three chain extenders such as ethylene glycol(EG), neopentyl glycol(NPG), and 1,4-buthandiol(1,4-BD). The five types of synthesized polyurethane resins and commercially available bisphenol A type epoxy resin were blended in weight ratios of 90:10, 70:30, and 50:50 to synthesize 15 types of polyurethane/epoxy hybrid resins. Among the polyurethane resins, the one that was synthesized using PCD and 1,4-BD showed excellent tensile strength, 100% modulus, low extension, and relatively high viscosity. Polyurethane/epoxy hybrid resins with higher epoxy resin contents showed better thermal properties and water resistance while those with higher polyurethane contents showed higher flexibility. The polyurethane/epoxy hybrid resin made by blending the polyurethane based on PCD and 1,4-BD with a bisphenol A type epoxy resin in a weight ratio of 70:30 was identified to be the most suitable to be used in speaker dampers.

• 한국염색가공학회지
• /
• 제33권2호
• /
• pp.79-86
• /
• 2021

This study investigated the effect of a pigment (C. I. Pigment Red 122) addition on mechanical properties of the epoxy resin, diglycidyl ether of bisphenol F (DGEBF) and G640 curing agent. The K/S value, thermal properties, tensile properties, and fracture toughness of the prepared epoxy samples were evaluated. When the pigment was added to the DGEBF/G640 epoxy system, the color of the epoxy resin changed to red from transparent and yellowish color, and the K/S value in the red region increased as the pigment content increased. When the pigment content was increased up to 0.1 phr, the tensile strength was improved up to 21.8 %, whereas the pigment content was over 0.1 phr, the tensile strength decreased. The fracture toughness was improves up to 23.1 % until the amount of pigment added was up to 0.2 phr, and then decreased when the amount of the pigment added was more than 0.2 phr. This attributed to the aggregation of the pigments in the epoxy resin when the amount of the pigment added was more than 0.2 phr. Therefore, the coloration of the epoxy resin with an organic pigment must be carried out very carefully because the coloration of epoxy resin affects its mechanical properties.

• 한국응용과학기술학회지
• /
• 제26권4호
• /
• pp.379-384
• /
• 2009

Epoxy resin based encapsulants are widely used in semiconductor packaging applications. Epoxy resin based encapsulants are often subject to crack or delamination during the reliability test due to the thermal stress caused by high modulus nature of epoxy resins. Epoxy functional siloxanes are often added into epoxy resin to reduce the modulus so that the thermal stress can be reduced. Epoxy functional siloxanes, additives for reduced modulus, were synthesized and added into the curable epoxy resins. The modulus and the coefficient of thermal expansion (CTE) were also measured to investigate the thermal stress and to see whether the epoxy functional siloxane adversely affects the CTE or not. As a result, around 26% to 72% of thermal stress reduction was observed with no adverse effect on CTE.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.761-764
• /
• 2005

Epoxy resin, as no-hardening, applied for repair and finish materials is used to mix together with hardener. It is advantages that epoxy resin has reaction shrinkage less than other materials and has excellent in water proofing, thermal resistance. The other hands, because ratio of combination of epoxy resin and hardener is fixed, it is not possible to change according to field condition. This investigated suspended time by temperature and hardener ratio. As a results of study, it can select economical ratio of the epoxy resin and hardener according to site situation.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.273-275
• /
• 2002

In this studies, curing behavior and mechanical properties of tetrafunctional epoxy resin (4EP)/ fluorine-containing epoxy resin (FEP) blend systems was investigated with 4, 4'-diaminodiphenol methane (DDM) as a curing agent. The cure activation energies $(E_a)$) were studied by Flynn-Wall-Ozawa's equation with dynamic DSC method. For the fracture toughness of the casting specimens, the critical stress intensity factor ($K_{IC}$) and the specific fracture energy ($G_{IC}$) were determined by fracture toughness test.

• 동력기계공학회지
• /
• 제14권4호
• /
• pp.68-75
• /
• 2010

The effect of dispersion agent, the content and size of nanoparticle on the mechanical and thermal properties has been investigated in $TiO_2$ nanoparticle/epoxy resin composites(nanocomposites). The weight fraction of fabricated nanocomposites were 0, 1, 3, 5%, respectively. The glass transition temperature was lower than pure epoxy resin and decreased with the increasing of nanopaticle content. This is considered that the cross link of epoxy resin during solidification was hindered by the presence of nanoparticles. Nanocomposites of 3wt% content with dispersion agent showed the best tensile strength. The tensile strength of 20㎚ $TiO_2$ nanocomposites were higher than one of 200nm $TiO_2$ nanocomposites.

• 대한전기학회논문지
• /
• 제37권6호
• /
• pp.406-413
• /
• 1988

This paper is to investigate relationships between tree inception voltage, tree extension or treeing breakdown voltage and physical characteristics changing as parameter of the post-cured conditions of thermo-setting epoxy resin. According to the results in this paper, the optimal tree inception voltage and treeing breakdown voltage of the samples are obtained for the sample post cured for 15 hours at 100 'C. It can be noticed that these results are closely related with the state of interior molecule coupling and three-dimen sional cross-linked of thermo-setting epoxy resin. And tree inception, tree extension and treeing breakdown of the samples are affected significantly on the post-cured conditions and the cooling method after post-cured of thermo-setting epoxy resin. Moreover, the tree extension by ambient temperature are closely related with softening temperature of thermo-setting epoxy resin.

• 한국건축시공학회지
• /
• 제7권3호
• /
• pp.107-113
• /
• 2007

This study is to investigate adhesive properties depending on the temperature, humidity, and freeze-thraw of the Steel plate adhesive strengthening method by the epoxy resin. The results are summarized as following. For the temperature variation, the debonding failure appear only after 1 cycle of temperature varoation because the coefficient of thermal expansion of the epoxy resin is comparatively large, and the bonding strength is decreased. The deformation properties and ultrasonic pulse velocity on each materials are similar until 4 cycles on the dry and moisture test. As the freeze-thraw test, the epoxy resin is degraded easily subjected to freeze-thaw cycle, comparatively easy, so the debonding failure may occur in short term because of the freeze-thaw repeatition.p