• Environmental Engineering Research
• /
• v.16 no.2
• /
• pp.91-96
• /
• 2011

Limited information is available on the degradation of volatile hydrocarbons determined via the use of plate-inserted photocatalytic reactors. This has led to the evaluation of surface areas of cylindrical continuous-flow photocatalytic reactors for the degradation of three selected aromatic hydrocarbons. Three types of reactors were prepared: a double cylinder-type, a single cylindrical-type without plates and a single cylindrical-type with inserted glass tubes. According to diffuse reflectance, FTIR and X-ray diffraction (XRD) spectroscopy, the surface characteristics of a coated photocatalyst were very similar to those of raw $TiO_2$, thereby suggesting that the coated photocatalyst exhibited the same photocatalytic activity as the raw $TiO_2$. The photocatalytic degradation efficiencies were significantly or slightly higher for the single cylinder-type reactor than for the double cylinder-type reactor which had a greater catalytic surface area. However, for all target compounds, the degradation efficiencies increased gradually when the number of plates was increased. Accordingly, it was suggested that the surface area being enhanced for the plate-inserted reactor would elevate the photocatalytic degradation efficiency effectively. In addition, this study confirmed that both initial concentrations of target compounds and flow rates were important parameters for the photocatalytic removal mechanism of these plate-inserted photocatalytic reactors.

• Membrane and Water Treatment
• /
• v.14 no.3
• /
• pp.121-128
• /
• 2023

This study introduces a NaOH/Zn-assisted hydrothermal method for the synthesis of zeolites derived from coal ash (CA). A zeolite/Zn adsorbent is successfully prepared by the activation of CA with NaOH and Zn; it is characterized by a high surface area and a negative surface charge.Methylene blue (MB) and methyl orange (MO) are selected as dye pollutants, and their adsorption onto the zeolite/Zn adsorbent is investigated. Results show the high adsorption capacities of MB and MO and that the negative surface charge facilitates electrostatic interactions between the adsorbates and adsorbents. The zeolite/Zn adsorbents shows the selective adsorption of positively charged dye MB via electrostatic interactions between the =NH+ group (positive dipole) and the oxygen functional group of the adsorbents (negative dipole). The selectivity for the positively charged dye is sufficiently high, with the removal efficiency reaching 99.41% within 10 min. By contrast, the negatively charged dye MO exhibits negligible absorption. These findings confirm the role of electrostatic interactions in the adsorption of MB, in addition to the effect of a large surface area. The results of this study are expected to facilitate the development of simple, eco-friendly, and cost-effective zeolite-based adsorptive composites from CA residuals for the selective removal of dye pollutants from CA waste.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.798-800
• /
• 2003

The time shift processing of ground measured surface temperature with the meteorological variables has no evaluated function. We introduce new evaluating function. To use this evaluating function, the algorithm of time-shift processing will be able to be reliable and get error-bar for all moving measured point's data. We will finally obtain the area averaged surface temperature by land observation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.5
• /
• pp.55-59
• /
• 2011

Atmospheric plasma technology was utilized in order to modify surface characteristics of base paper for coating. Argon(Ar) and oxygen(O2) gases were used. It was found that contact angle of a water droplet was decreased with increasing voltage during plasma treatment, meaning that the hydrophilicity of paper surface was increased. On the other hand, the physical properties like roughness and optical properties such as gloss, brightness and opacity were not influenced by the plasma treatment. In conclusion, atmospheric plasma technology can be utilized to control hydrophilicity of paper surface without affecting physical properties of the paper.

• Journal of Environmental Science International
• /
• v.19 no.6
• /
• pp.681-687
• /
• 2010

Mesoporous silica was prepared from hydrothermal synthesis using gel mixture of tetraethylorthosilcate (TEOS) as silica source and cetyltrimethylammonium bromide (CTMABr) as a surfactant. In the optimum synthesis cause, molar ratio of template and silica changed. The surface and structure properties of mesoporous silica were determined by XRD, SEM, TEM and BET. Also, surface potential of mesoporous silica was measured using zeta potential. $N_2$ adsorption isotherm characteristics, including the specific surface area ($S_{BET}$), total pore volume $V_T$), and average pore diameter ($D_{BJH}$), were determined by BET. As a result, SBET of $100m^2/g{\sim}1500m^2/g$ was determined from the $N_2$ adsorption isotherm. Also, the average pore diameter was 2 nm∼4 nm. Mesoporous silica's surface potential of minus charge was determined from zeta potential.

• Elastomers and Composites
• /
• v.58 no.4
• /
• pp.191-200
• /
• 2023

In this study, MoS₂ nanoparticles were synthesized and analyzed through powder X-ray diffraction, Raman, ultraviolet-visible, and X-ray photoelectron spectroscopies. The surface morphologies of the as-synthesized MoS₂ nanoparticles were investigated through scanning and transmission electron microscopies. The sonocatalytic activity of the MoS₂ nanoparticles toward Orange II removal was evaluated by utilizing a Box-Behnken design for response surface methodology in the experimental design. The sonocatalyst dosage, Orange II dye concentration, and ultrasound treatment time were optimized to be 0.49 g/L, 5 mg/L, and 150 min, respectively. The maximum efficiency of Orange II degradation on MoS₂ nanoparticles was achieved, with a final average value of 82.93%. Further, the results of a kinetics study on sonocatalytic Orange II degradation demonstrated that the process fits well with a pseudo-first-order kinetic model.

• Geomechanics and Engineering
• /
• v.15 no.3
• /
• pp.823-831
• /
• 2018

The most important issue during shield TBM tunneling in soft ground formations is to appropriately control ground surface settlement. Among various operational conditions in shield TBM tunneling, the face pressure and backfill pressure should be the most important and immediate measure to restrain surface settlement during excavation. In this paper, a 3-D hydro-mechanical coupled FE model is developed to numerically simulate the entire process of shield TBM tunneling, which is verified by comparing with real field measurements of ground surface settlement. The effect of permeability and stiffness of ground formations on tunneling-induced surface settlement was discussed in the parametric study. An increase in the face pressure and backfill pressure does not always lead to a decrease in surface settlement, but there are the critical face pressure and backfill pressure. In addition, considering the relatively low permeability of ground formations, the surface settlement consists of two parts, i.e., immediate settlement and consolidation settlement, which shows a distinct settlement behavior to each other.

• Environmental Engineering Research
• /
• v.20 no.2
• /
• pp.199-204
• /
• 2015

In this study, a novel phosphorus removal filter made of brass scrubber with higher porosity of over 96% was fabricated and evaluated. The brass scrubber was surface-modified to form copper hydroxide on the surface of the brass, which could be a phosphate removal filter for advanced wastewater treatment because the phosphates could be removed by the ion exchange with hydroxyl ions of copper hydroxide. The evaluation of phosphate removal was performed under the conditions of the batch type in wastewater and continuous type through filters. Filter recycling was also evaluated with retreatment of the surface modification process. The phosphate was rapidly removed within a very shorter contact time by the surface-modified brass scrubber filter, and the phosphate mass of 1.57 mg was removed per gram of the filter. The possibility of this surface-modified brass scrubber filter for phosphorus removal was shown without undesirable sludge production of existing chemical phosphorus removal techniques, and we feel that it would be very meaningful as a new wastewater treatment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.1
• /
• pp.31-36
• /
• 2012

In the previous study, the possibility of modifying the surface properties of base paper with plasma treatment was evaluated. It was shown that only the hydrophilic properties of the base paper surface was increased while there was no changes in physical and optical properties. Only the surface of the plasma treated side was modified. In this study, the effect of plasma treatment on binder migration was elucidated. The base paper was plasma treated with various voltage and then the plasma treated base papers were coated with varying coated weight. The surface strength of the coated paper (dry and wet pick) was increased with plasma treatment, which implies that the plasma treatment of base paper can inhibit the binder migration.

• Journal of Environmental Science International
• /
• v.31 no.1
• /
• pp.43-50
• /
• 2022

In this paper, lysimeter was installed to analyze the moisture fluctuations on the surface of a forest. The weight of the soil was measured, and the moisture fluctuations were calculated through the difference in weight over time. The amount of dew condensation on the surface of the ground was about 2-7 mm. January experienced the most dew condensation (7.2 mm). It was found that about 43 mm of dew condensation was generated over one year. To analyze the characteristics of evapotranspiration in the forest, the evapotranspiration on the surface was measured by the lysimeter method and the evapotranspiration on the upper part of the canopy was measured by the eddy covariance method. These results were compared and analyzed. Until mid-October, the evapotranspiration of the forest was active, and the amount of evapotranspiration on the top of the canopy was higher than the amount on the surface. Thereafter, the amount of evapotranspiration on the top of the canopy decreased due to the lowering of temperature and net-radiation. The amount of evapotranspiration on the surface and above the canopy showed the same tendency.