Journal of Korea Technical Association of The Pulp and Paper Industry (펄프종이기술)

Korea Technical Association of the Pulp and Paper Industry (한국펄프종이공학회)
권호 표지
DOI QR코드

DOI QR Code

Manufacturing of High Quality Coated Paper using Environmental Friendly Plasma Technology(II) - Making coated paper using surface-treated base paper-

친환경 플라즈마 기술을 이용한 고품질 인쇄용지 제조 (제2보) - 표면처리된 원지를 이용한 도공지 제조 -

  • Shin, Dong-Joon (Dept. of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University) ;
  • Kim, Sun-Kyung (Dept. of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University) ;
  • Lee, Yong-Kyu (Dept. of Paper Science & Engineering, College of Forest & Environmental Sciences, Kangwon National University)
  • 신동준 (강원대학교 산림환경과학대학 제지공학과) ;
  • 김선경 (강원대학교 산림환경과학대학 제지공학과) ;
  • 이용규 (강원대학교 산림환경과학대학 제지공학과)
  • Received : 2012.02.02
  • Accepted : 2012.02.16
  • Published : 2012.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

In the previous study, the possibility of modifying the surface properties of base paper with plasma treatment was evaluated. It was shown that only the hydrophilic properties of the base paper surface was increased while there was no changes in physical and optical properties. Only the surface of the plasma treated side was modified. In this study, the effect of plasma treatment on binder migration was elucidated. The base paper was plasma treated with various voltage and then the plasma treated base papers were coated with varying coated weight. The surface strength of the coated paper (dry and wet pick) was increased with plasma treatment, which implies that the plasma treatment of base paper can inhibit the binder migration.

Keywords

References

  1. 이학래, 도공원지의 특성이 도공지 품질에 미치는 영향, 제지계 224:67 (1991).
  2. 이용규, 종이도공학, 강원대학교 제지공학과 (2008).
  3. Gron, J and Rantanen, R., Surface sizing and film coating, Pigment coating and surface sizing of paper. pp.489-539.
  4. Hua, X., Tanguy, P. A., Li, R. and Wagner, J. S., Effect of basestock formation on paper coating, Tappi J. 79(5):112 (1996).
  5. Lee. Y. K., Onabe. F. and Usuda, M., Studies on the properties of coating colors.VI Properties of coating color containing amphoteric latex, Japan Tappi J. 46(8):75 (1992).
  6. Nowicki, S.C. and Davis,H.T., Drying and binder migration in coated papers(1991), Department of Chemical Engineering and Material Science, University of Minnesota.
  7. Fardim, P., Paper and surface Chemistry-Part2-Coating and Printability, Instituto de Quimica, Universidade estadual de campinas, SP, Blazil.
  8. Dong S. W., Kim, T.K. and Won Lee, W.G., "Effect of Low pressure and Atmospheric Pressure Plasma Treatment on Contact Angle of Polycarbonate Surface." J, Korean Ind. Eng. Chem, Industrial Chemistry, Vol 21.
  9. 이용규, 도공층의 구조, Journal of Korea TAPPI, Vol. 34, No.2, pp.84-98 (2002).
  10. Deqiang, M. and Carter, R.D., Huber engineered materials, Prediction of coating structure change during calendering, Department of chemical and biological engineering university of maine.
  11. 신동준, 김선경, 이용규, 친환경 플라즈마 기술을 이용한 고품질 인쇄용지 제조(1보) 전압의 변화에 따른 도공원지 표면처리, Journal of Korea TAPP, Vol. 43, No.5, pp.55-59 (2012).
  12. 전성재, 조절된 코팅구조상에서 옵셋 인쇄광택의 발현 Part 2, 한국펄프.종이공학회 2003년 추계학술발표논문집 pp. 121-134 (2003).
  13. Hunter, C., Millan, G., Komarowska, K., Proverb, R., Dilts, K., Pawloska, L. and O'Toole, M., Printablility improvements in various paper grades, LANXESS corporation business Unit paper.
  14. 이용규, 정경모, 제지안료의 최신기술과 동향, 제지기술 23호 pp. 12-24 (2009).
  15. Dimmick, A., Saari, J., Mangin,P., and Daneault, C., Precoat and topcoat effects on final printability - part 2: coating structure analysis with merury intrusion, TAPPI papercon'09 conference (2009).