• Korean Journal of Environmental Agriculture
• /
• v.23 no.4
• /
• pp.251-257
• /
• 2004

Analytical methods were developed to determine cyclosulfamuron residues in soil, water, rice grain and straw using high-performance liquid chromatography (HPLC) with ultraviolet absorption detection. In these methods, cyclosulfamuron was extracted with aqueous $Na_2HPO_4$/acetone and acetone/methanol mixture from soil and rice samples respectively. Liquid-liquid partition coupled with ion-associated technique, Florisil column chromatography, and solid-phase extraction (SPE) were used to separate cyclosulfamuron from interfering co-extractives prior to HPLC analysis. For water sample, the residue was enriched in $C_{18}$-SPE cartridge, cleaned up in situ, and directly subjected to HPLC. Reverse-phase HPLC under ion-suppression was successfully applied to determine cyclo-sulfamuron in sample extracts with the detection at its ${\lambda}_{max}$ (254 nm). Recoveries from fortified samples averaged $87.8{\pm}7.1%$ (n=12), $97.3{\pm}7.2%$ (n=12), $90.8{\pm}6.6%$ (n=6), and $78.5{\pm}6.7%$ (n=6) for soil, water, rice grain and straw, respectively. Detection limits of the methods were 0.004 mg/kg, 0.001 mg/L, 0.01 mg/kg and 0.02 mg/kg for soil, water, rice grain and straw samples, respectively.

• Geomechanics and Engineering
• /
• v.17 no.5
• /
• pp.439-444
• /
• 2019

It is generally known that high strength soil is indicative of well-graded particle size distribution. However, there are some special cases of firm ground despite poor grade distribution, especially a specific gap-graded soil. Based on these discoveries, this study investigated the development of an additive of gap-graded soils designed to increase soil strength. This theoretical concept was used to calculate the mixed ratio required for optimal soil strength of the ground sample. The gap-graded aggregate was added according to Plato's polyhedral theory and subsequently calculated ratio and soil strength characteristics were then compared to characteristics of the original soil sample through various test results. In addition, the underground stress transfer rate was measured according to the test conditions. The test results showed that the ground settlement and stress limit thickness were reduced with the incorporation of gap-graded soil. Further field tests would confirm the reproducibility and reliability of the technology by using gap-graded soil to reinforce soft ground of a new construction site. Gap-graded soil has the potential to reduce the construction cost and time of construction compared to other reinforcing methods.

• Advances in environmental research
• /
• v.7 no.3
• /
• pp.201-212
• /
• 2018

In this study, conditions of solid phase extraction (SPE) for determination of some antibiotics such as trimethoprim, oxytetracycline, erythromycin, clarithromycin, azythromycin, doxycycline, sulfamethazine, ciprofloxacin, chlortetracycline, sulfamethoxazole in wastewaters were optimized. After the optimum volume and pH of the sample were determined, the effect of the concentration of the compounds and matrix were investigated. The highest recovery rates for antibiotic compounds were determined between 82% and 105% in 200 mL sample volume and pH 2.5. Then, antibiotic compounds were investigated in influent and effluent samples taken from Konya Urban Wastewater Treatment Plant. The concentration of the antibiotics was detected range of 0.11-101 ng/L in influent waters and

• Journal of Environmental Science International
• /
• v.33 no.2
• /
• pp.113-119
• /
• 2024

In this study, the most suitable sampling methods for the bimodal mass distribution characteristics and individual particle analysis of atmospheric aerosols were investigated. Samples collected in Quartz, Teflon, and Nuclepore filters were analyzed for individual particles using scanning electron microscopy with an energy-dispersive X-ray spectrometer (SEM/EDS). Then, the pore diameter of the filter and the collection flow rate were determined using the theoretical collection efficiency calculation formula for two-stage separation sample collection of coarse and fine particles. The Nuclepore filter was found to be the most suitable filter for identifying the physical and chemical characteristics of atmospheric aerosols since it was able to separate the sample and count the different sized particles better than either Quartz or Teflon. Nuclepore filters with 8.0 ㎛ and 0.4 ㎛ pores were connected in series and exposed to a flow rate of 16.7 L/min for two-stage separation sampling. The results show that it is possible to separate and collect both coarse and fine particles. We expect that the proposed methodology will be used for future individual particle analysis of atmospheric aerosols and related research.

• Journal of the Society of Disaster Information
• /
• v.9 no.3
• /
• pp.249-258
• /
• 2013

Recieved Mar. 06, 2013 Revised Mar. 29, 2013 Accepted Sep. 11, 2013In this study, we evaluated the method performance and the optimum sample injection method of the portable GC/MS(HAPSITE) which were designed to operate on scene of chemical accidents. Chemicals used for performance test were vinyl chloride(VC), methyl chloride(MC), benzene(Bz), toluene(Tol). CRM(Certified Reference Material) Manufactured by KRISS(Korea Research Institute of Standards and Science) was used as the standard gas. The results showed that 1) Among three sample injection methods(Cylinder, Silico canister, and Bag), bag was identified as the most appropriate sample injection method. Bag material and capacity did not significantly affect the results. The most ideal reproducibility occurred at the 2-minute point of the purge time in the loop and tenax methods. 2) Performance evaluation of HAPSITE was conducted. Evaluation items were reproducibility, linearity, method detection limit, etc. Tenax concentration method was appropriate for larger molecules and Carbopack concentration method was suitable for smaller molecules.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.1
• /
• pp.36-42
• /
• 2017

BACKGROUND: Yuza seed by-product has been produced in a large amount from the agricultural farms in the southern area of Korea. It has been mostly abandoned after commercial process for the production of juice, jam and tea. The study on the reuse of the yuza seed by-product has received much attention as a bio-resource material for the production of active compound in agriculture. METHODS AND RESULTS: Insecticidal rhamnolipid-producing Pseudomonas sp. EP-3 was grown in mineral salt media with the yuza seed by-product at 2, 20, 50 and 100 g/L. The growth of EP-3 was accompanied by a increase in insecticidal activity against green peach aphid. The highest insecticidal activity was observed when EP-3 was grown in the medium containing 50 g/L of the seed sample, producing approximately 996 mg/L of rhamnolipid at 96 h. Palmitic acid, stearic acid, oleic acid and linoleic acid were determined as the major fatty acids of the seed sample. The EP-3 cultures grown on the fatty acid mixture extracted from the seed sample showed a aphid mortality similar to that of cultures grown on the seed sample. The EP-3 cultures grown on 50 g/L of the seed sample showed aphid mortality more than 90% under greenhouse conditions. CONCLUSION: This study suggested that the yuza seed by-product may be used as a renewable material for microbial production of rhamnolipid against green peach aphid.

• The Korean Journal of Applied Statistics
• /
• v.36 no.4
• /
• pp.337-347
• /
• 2023

Sampling designs often use stratified sampling, where elements or clusters of the study population are divided into strata and an independent sample is chosen from each stratum. The stratification strategy consists of stratification and sample allocation, which are important issues that are repeatedly considered in survey sampling. Although a stratified multistage sample design is often used in practice, the literature tends to discuss simple sampling in terms of stratum effects or stratum efficiency. This study examines an existing stratum efficiency measure for two-stage sampling and further proposes additional stratum efficiency measures using the design effect model. The proposed measures are used to evaluate the stratification strategy of the sample design for high school students of the 4^th Korean National Environmental Health Survey (KoNEHS).

• Journal of the Korean Home Economics Association
• /
• v.41 no.12
• /
• pp.169-186
• /
• 2003

The purpose of this study were (1) to examine the level of housewives' pro- environmental behavior, and (2) to analyze the effect of the selected variables on pro-environmental behavior 941 sample were selected from housewives living in urban area. For the analysis of data, frequencies, means, one-way ANOVA, DMR test, Chi-square test, and multiple regression analysis were used. The major findings were as follows：1. The level of housewives' pro-environmental behavior was lower than that of pro-environmental attitude. 2. The level of housewives' pro-environmental behavior was mainly affected by their environment-related variables, for example, pro-environmental attitude, and experience of environmental education. Most of socio-demographic variables and family-related variables didn't have significant effects on the level of pro-environmental behavior.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.1
• /
• pp.94-101
• /
• 2013

It is well known that uncertainty associated with soil sampling is bigger than that with analysis. In this research, uncertainties for soil sampling when assessing TPH and BTEX concentration in soils were quantified based on actual field data. It is almost impossible to assess exact contamination of the site regardless how carefully devised for sampling. Uncertainties associated with sample reduction for further chemical analysis were quantified approximately 10 times larger than those associated with core sampling on site. Bigger uncertainties occur when contamination level is low, sample quantity is small, and soil particle is coarse. To minimize the uncertainties on field, homogenization of soil sample is necessary and its procedures are proposed in this research as well.

• Journal of Korean Society on Water Environment
• /
• v.31 no.6
• /
• pp.610-618
• /
• 2015

This study was conducted to find out the influence of sample size (accumulated survey areas) on the seven biological indices of benthic macroinvertebrates. BMI, the index similar to Zeilika-Marvan’s saprobic index, tended to be independent on the variations of sample size. The other indices (Shannon-Weaver’s diversity, Margalef’s richness, Menhinick’s richness, Pielou’s evenness, and Lenat’s EPT index) showed the considerable variations along with the increase of sample size and environmental conditions. To get the appropriate index values, it should be sampled at least 6 replicates more based on 30×30cm Surber sampler. In addition, the habitat heterogeneity index of benthic macroinvertebrates suggested in this study, it will be able to be used for evaluating the heterogeneity of habitats.