• Journal of Soil and Groundwater Environment
• /
• v.19 no.5
• /
• pp.26-34
• /
• 2014

A $1.5m(L){\times}1.0m(W){\times}1.1m(H)$ polypropylene (PP) field scale electroniketic system coupled with stainless steel electrodes was designed to examined metal removal performance applied 0.2-0.35 V/cm potential gradient and 0.05-0.5M lactic acid for 20 day. Electroosmosis permeabilities of $2.2{\times}10^{-5}cm^2/V-s$ to $4.8{\times}10^{-5}cm^2/V-s$ were observed and it increased with the potential gradient increased. The reservoir pH controlled at $7.0{\pm}1.0$ has been effectively diminished the clogging of most metal oxides. The best removal efficiency of Zn, Pb, and Ni was 78.4%, 84.3%, and 40.1%, respectively, in the field scale EK system applied 0.35 V/cm and 0.05M lactic acid for 20 days. Increasing potential gradient would more effectively enhance metal removal than increasing concentration of processing fluid. The reservoir and soil temperatures were majorly related to potential gradient and power consumptio. A $4-16^{\circ}C$ above room temperature was observed in the investigated system. It was found that the temperature increase in soil transported the pore water and metals from bottom to the topsoil. This vertical transport phenomenon is critical for the electrokinetic process to remediate in-situ deep pollution.

• The Korean Journal of Ecology
• /
• v.15 no.4
• /
• pp.365-375
• /
• 1992

The environmental gradient analyses were applied for the distribution patterns of species populations in mt. moak provincial park in korea. The species populations were sequentially ordered along the environmental gradients such as soil moisture, soil ph, soil organic matter content and elevation and were grouped into seven ecological groups by the two-dimensional analyses of temperature-moisture gradient : zelkova serrata group on mesic-lower parts near the streames and well drained stony slopes, carpinus tschonoskii group on mesic-middle parts, quercus acutissima group on lower parts destroyed by human activities, quercus variabilis group on xeric-middle parts, quercus serrata group on xeric-upper middle parts, quercus mongolica group on xeric-upper parts and pinus densiflora group on xeric-rock ridge lines, hillocks and lower parts interfered by human. Four forest vegetation types, zelkova forest dominated by the c. tschonoskii group on mesic-middle parts, oak forest dominated by the groups of q. acutissima, q. variabilis, q. serrata and q. mongolica on xeric sites and pine forest dominated by the p. densiflora group on dry and poor sites, were separated in mosaic chart by the two-dimensional analysis.

• Earthquakes and Structures
• /
• v.1 no.3
• /
• pp.289-306
• /
• 2010

A gradient-based evolutionary optimization methodology is presented for finding the optimal design of viscous dampers to minimize an objective function defined for a linear multi-storey structure. The maximum value along height of the transfer function amplitudes for the interstorey drifts is taken as the objective function. Since the ground motion includes various uncertainties, the optimal damper placement may be different depending on the ground motion used for design. Furthermore, the transfer function treated as the objective function depends on the properties of structural parameters and added dampers. This implies that a more robust damper design is desired. A reliable and robust damping design system against any unpredictable ground motions can be provided by minimizing the maximum transfer function. Such design system is proposed in this paper.

• Aerospace Engineering and Technology
• /
• v.2 no.1
• /
• pp.54-62
• /
• 2003

The satellite in space has a tiny size but is subject to the disturbance torques caused by various sources. The presence of environmental disturbance torques significantly affects the orient as well as the orbital motion of satellite. The sources of environmental effects on LEO Satellite attitude dynamics are various. Four of these, gravity gradient, Earth's magnetic field, solar radiation pressure and aerodynamic are dominant and deterministic. In this study, we describe the model of environmental disturbance torques acting on LEO Satellite and the effects of environmental disturbance torques on LEO Satellite attitude dynamics in detail.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.1
• /
• pp.28-32
• /
• 2016

There are a few thousand abandoned metal mines in South Korea. The abandoned mines cause several environmental problems including releasing acid mine drainage (AMD), which contain a very high acidity and heavy metal ions such as Fe, Cu, Cd, Pb, and As. Iron oxides can be formed from the AMD by increasing the solution pH and inducing precipitation. Current study focused on the formation of iron oxide in an AMD and used the oxide for adsorption of heavy metals. The heavy metal adsorbed iron oxide was separated with a superconducting magnet. The duration of iron oxide formation affected on the type of mineral and the degree of magnetization. The removal rate of heavy metal by the adsorption process with the formed iron oxide was highly dependent on the type of iron oxide and the solution pH. A high gradient magnetic separation (HGMS) system successfully separated the iron oxide and harmful heavy metals.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.4
• /
• pp.151-155
• /
• 2006

HVAC transmission lines must be designed to satisfy environmental regulations. Therefore it is necessary to pre-evaluate environmental problems for transmission line designer using prediction program. In this study, environmental design software, TLCALC(Transmission Line CALCulation) for transmission lines was developed as a comprehensive window program. It has 6 modules that are audible noise, radio noise, television noise, magnetic field, electric field and conductor surface gradient. TLCALC solved a few problems in use of the existing foreign tools and took several advantages as follows; (1) It is a common tool that solves calculating limitations of foreign formulas, (2) It has wide application ranges and enhances accuracy of prediction. (3) It can be applied to almost transmission line configurations in Korea. (4) Experienced designers can get the results of calculation within about 15 minutes. Because the use of TLCALC is easy and practical, this program will be usefully applied to the environmental friendly design and construction of transmission lines. In the future, it is expected that public complaints and social environmental cost will be reduced by the use of TLCALC.

• Journal of Environmental Impact Assessment
• /
• v.18 no.3
• /
• pp.161-170
• /
• 2009

As urban growth continues, the earth ecosystem is increasingly dependent on the patterns of urban growth. The impact intensity from urban growth is expected to change predictably with distance from the urban center. However we can't fully understand yet how urban development pattern affects urban ecosystem. In researches about urban ecosystem, it is important to relate the spatial pattern of urbanization to ecological processes. So we used gradient analysis with time data; 1980's, 1990's and 2000's. We attempted to quantify the urban spatiotemporal impacts in Daejeon-city and Cheonan-city, Korea, along a 75km long and 3km wide transect. Through the results, we found the impacts range of urbanization with urban development process of two cities. When the urban growth was concentrated on in both cities, the impacts intensity and range were much stronger and wider. As a result, in urban planning or green space planning, we have to consider suitable urban development forms with surrounding areas, and make legal clauses which limits landuse change. This quantifying the urban gradient is an important step in understanding urban ecology.

• Economic and Environmental Geology
• /
• v.27 no.5
• /
• pp.479-489
• /
• 1994

In this paper, the iterative least-squares inversion method is used to determine shapes and density contrasts of 2-D structures from the gravity data. The 2-D structures are represented by their cross-sections of N-sided polygons with density contrasts which are constant or varying with depth. Gravity data are calculated by theoretical formulas for the above structure models. The data are considered as observed ones and used for inversions. The inversions are performed by the following processes: I) polygon's vertices and density contrast are initially assumed, 2) gravity are calculated for the assumed model and error between the true (observed) and calculated gravity are determined, 3) new vertices and density contrast are determined from the error by using the damped least-squares inversion method, and 4) final model is determined when the error is very small. Results of this study show that the shape and density contrast of each model are accurately determined when the density contrast is constant or vertical density gradient is known. In case where the density gradient is unknown, the inversion gives incorrect results. But the shape and density gradient of the model are determined when the surface density contrast is known.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.150-150
• /
• 2022

This study investigates the roles of decomposition methods on high accuracy in daily rainfall prediction from light gradient boosting machine (LightGBM) algorithm. Here, empirical mode decomposition (EMD) and singular spectrum analysis (SSA) methods were considered to decompose and reconstruct input time series into trend terms, fluctuating terms, and noise components. The decomposed time series from EMD and SSA methods were used as input data for LightGBM algorithm in two hybrid models, including empirical mode-based light gradient boosting machine (EMDGBM) and singular spectrum analysis-based light gradient boosting machine (SSAGBM), respectively. A total of four parameters (i.e., temperature, humidity, wind speed, and rainfall) at a daily scale from 2003 to 2017 is used as input data for daily rainfall prediction. As results from statistical performance indicators, it indicates that the SSAGBM model shows a better performance than the EMDGBM model and the original LightGBM algorithm with no decomposition methods. It represents that the accuracy of LightGBM algorithm in rainfall prediction was improved with the SSA method when using multivariate dataset.

• Journal of Forest and Environmental Science
• /
• v.38 no.2
• /
• pp.110-121
• /
• 2022

Leaf functional traits widely have been used to understand the environmental controls of resource utilization strategy of plants along the environmental gradients. By using key leaf functional traits, we quantified the relationships between leaf traits and local climate throughout the distributional range of Rhododendron caucasicum Pall. in eastern and western Georgian mountains (the South Caucasus). Our results revealed, that all traits showed high levels of intraspecific variability across study locations and confirmed a strong phenotypic differentiation of leaf functional variation along the east-west longitudinal gradient in response to the local climate; out of the explored climatic variables, the moisture factors related to precipitation and number of precipitation and dry days for winter and growth seasons were more strongly related to leaf trait variation than the elevation and air temperature. Among studied leaf traits, the leaf specific area (SLA) showed the highest level of variability indicating the different resource utilization strategies of eastern and western-central Rh. caucasicum individuals. High SLA leaves for western-central Caucasian individuals work in relatively resource-rich environments (more humid in terms of precipitation amount and the number of precipitation days in winter) and could be explained by preferential allocation to photosynthesis and growth, while eastern Caucasian samples work in resource-poor environments (less humid in terms of precipitation amount and the number of precipitation days in winter) and the retention of captured resources is a higher priority appearing in a low SLA leaves. However, more evidence from a broader study of the species throughout its distribution range by including additional environmental factors and molecular markers are needed for firmer conclusions of intraspecific variability of Rh. caucasicum.