• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.59-65
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for petrochemical basic compound manufacturing (PBCM) and plastics and synthetic resins manufacturing (PSRM) industry. Wastewater discharged from the each category contains high concentration of COD and toluene. Eighteen sites were surveyed and wastewater qualities were analyzed. Six and two different technologies were applied to the PBCM and PSRM industry for the end-of-pipe treatment process, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options: typical activated-sludge process + sand filtration + activated carbon adsorption (PBCM) and wet oxidation + chemical precipitation + typical activated-sludge process + chemical precipitation (PSRM) were selected as the BAT for each industry.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.12
• /
• pp.75-79
• /
• 2012

In the recycling of industrial waste unlike household waste, the legislation and the governmental systematic support, etc. were not also established due to an anxiety of hazard or harmfulness, etc. and a preconception. So the legislation and the system should be urgently established for the recycling of industrial waste. In this study, the environmental analyzing method of industrial waste-mixed coal ash in ash pond to recycle as a construction material is suggested by considering and analyzing test process and results about environmental impact factors of mixed coal ash. It is certified that there are not environmental problems in the recycling of mixed coal ash in ash pond as a construction material, according as its classification is general waste and each corresponding item of the leaching test result are satisfied with the 'environmental safety criteria' suggested in this study. And to build database, it is necessary to survey the environmental impact on surrounding areas with time after its recycling as a construction material.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.429-435
• /
• 2012

A Development of the Evaluation Criteria on the User's Bicycle Environment for Work and School Trip Purpose: This study suggests future improvements and some current questions about the development of the evaluation criteria on the user's bicycle environment for Work and School Trip Purpose. The direction of development on Evaluation Criteria is all about on the side of necessity of bicycle users, the reflection of new policy, the construction of total evaluation criteria, and the examination of connecting study with current study. This study establishes a Development of the Evaluation Criteria on the User's Bicycle Environment for Work and School Trip Purpose. After that, this study examines previous evaluation criterias and researchers will select the primary provision of evaluation through FGI, and they derive the final evaluation criteria throughout the verification of suitability on Evaluation Criteria. The summery of this study is like this. First, suggestions of improvements of zones in bicycles users' evaluations, Second Suggestions of the current conditions by GIS and the result of model analysis, Third Clarify of major provisions in terms of zones by using Spider Map.

• Journal of Environmental Health Sciences
• /
• v.41 no.2
• /
• pp.102-115
• /
• 2015

Objectives: A learning organization was designed and implemented on the basis of the selection criteria and essential elements of knowledge translation theory. Methods: The learning organization was designed on the basis of biosafety harmonization criteria and risk management strategy and was implemented as the learning organization for biosafety management by the National Institute of Health, Korea Centers for Disease Control & Prevention. The effect of knowledge translation in the research institutions by evidence-based policy was verified. Results: The result of applying the knowledge translation theory involving all stakeholders showed a positive reaction in establishing and implementing biosafety management strategy and embodied risk assessment criteria and evoked sympathy with the necessity of learning and using of expert knowledge about risk assessment and risk management. All stakeholders initiated voluntarily action toward new human-network construction and communication between similar organizations. The learning organization's capability expanded the base of knowledge translation. Conclusion: These results showed that a learning organization could enhance the autonomous safety management system by diffusion of knowledge translation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.2
• /
• pp.15-30
• /
• 2014

Systematic management of wetlands should be a priority to build the data for the extent and distribution of wetlands all over the country. However there are no clear guidelines for the wetland boundary delineation, so researchers have to determine the boundary of wetlands in each different way. As a result, it is very difficult to identify the extent and distribution of wetlands. This study proposes applicable criteria of setting boundary of wetlands which consider their wetland vegetation and geographical characteristics, according to wetland classification. The proposed site in this study is selected wetlands that represent each wetland type and have been ecologically well preserved like the wetland protected areas. GIS data for setting the boundary of wetlands selected were land-cover maps, aerial photographs, high resolution satellite images, and digital topographic maps. In this study, 'wetland unit determination' of the Washington State Wetlands Rating System(WSDE, 1993) and the concept of 'Wetland and Deep-water Habitats' was suggested by Wetland Delineation Manual(USACE, 1987) were used as criteria for setting the boundary of wetlands. As a result, it was found that the boundary of wetlands could be, in general, set consistently. Also, it seemed possible to set systematic and standardized boundary of wetlands and to provide more objective data for establishing national wetland policies, if maps of wetlands are made and an investigation of wetlands is implemented according to the criteria.

• Journal of Korean Society on Water Environment
• /
• v.29 no.2
• /
• pp.165-169
• /
• 2013

Freshwater fish intake is a critical parameter for deriving water quality criteria and water quality standards for protection of human health based on human health risk assessment. Although the freshwater fish intake parameter should be accurate and representative of Korean fish consumption for the water quality criteria to be reliable, data are limited in Korea and have low reliability. In this study, Korean National Health and Nutrition Examination Survey data from 2008-2010 were analyzed to reevaluate freshwater fish consumption. Based on these results, an average consumption rate of 3.0 g/day per person, a $90^{th}$ percentile consumption rate of 0.0 g/day per person, an average consumption rate of 65.7 g/day per fish consumer, and a $90^{th}$ percentile consumption rate of 153.4 g/day per fish consumer were proposed for derivation of water quality criteria using a conservative approach and various exposure scenarios.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.3 no.2
• /
• pp.11-18
• /
• 2012

This study proposes flexural failure design criteria of continuous slabs enhanced by a hybrid system of fiber reinforced polymer (FRP) and ultra high performance concrete (UHPC). The proposed hybrid retrofit system is designed to be placed at the top surface of the slabs for flexural strengthening of the sections in both positive and negative moment zones. The enhancing mechanisms of the proposed system for both positive and negative moment regions are presented. The neutral axis of the enhanced sections in positive moment zone at flexural failure is enforced to be in UHPC overlay for preventing the compression in FRP. From this condition, a relationship between design parameters of FRP and UHPC is established. Although the capacity of the proposed retrofit system to enhance flexural strength and ductility is confirmed through experiments of one-way RC slabs having two continuous spans, the retrofitted slabs failed in shear. To prevent this shear failure, a design criteria of flexural failure is proposed.

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.756-760
• /
• 2007

Most of the sewage treatment plants in Korea are being operated by using the conventional activated sludge process. Recently, as the water criteria have been strict with regard to such main culprits of eutrophication, the existing sewage treatment plants are obliged to upgrade their treatment technology to meet the criteria. Under such circumstances, this study was aimed at analyzing the conditions of an existing sewage treatment plants in Korea, and thereupon, test its treatment performance for the actual sewage water by operating a pilot plant. When the pilot plant was operated with the NPR process at the capacity of $30m^3/day$, the average contents of BOD, $COD_{Mn}$, SS, T-N and T-P in the effluents were 7.0 mg/L, 9.7 mg/L, 5.1 mg/L, 8.0 mg/L and 0.23 mg/L, respectively, which were very stable in general. Accordingly, if the NPR process used for this pilot plant to upgrade the treatment technology for the sewage treatment plat could be adopted, the effluent water quality criteria effective beginning from 2008 would be met.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.26-27
• /
• 2014

Sustainable development has become a growing concern throughout the world. Construction industry also has participated in the efforts to minimize the environmental impacts. In Korea, the government has already established the green construction certification(G-seed) and guidelines for sustainable construction. However, domestic guidelines are focused on the design and construction phase, not on the construction project. In addition, it is difficult to find instructions due to the complex structure based on the work unit. Therefore this study aims to deduct the component structure for sustainable construction guidelines in the planning, design and construction phases by utilizing the Factor Analysis. Following the literature review, a total of 26 criteria were identified. Further, a survey was conducted to capture the perceptions on the importance of the criteria. According to the factor analysis, the criteria can be grouped into 8 factors : Environmental factors management, Management planning, Cost and Design management, Energy management, Material management, Certification and regulation management, General Management and Others.

• Journal of Environmental Health Sciences
• /
• v.14 no.1
• /
• pp.73-86
• /
• 1988

In order to determine the content levels of trace metals in common salts, 64 bay salt samples were collected from three producing districts and 33 bay salt samples, 32 remade salt samples and 5 fine salt samples were collected from 7 major cities in Korea, from August to September 1987. These were analysed for content levels of Pb, Cd, Cu, Zn and Mn using Atomic Absorption Spectrophotometer. The results were as follows: 1. Lead contents in three type salts were N.D. - 1081.9 $\mu$g/kg and fourteen percent of the 114 samples exceeded the World Health Organization(WHO) criteria of 100$\mu$g/kg. Cadmium contents of samples were N.D.- 382C.5 $\mu$g/kg and five percent of the 114 samples were over the Spanish criteria of 500 $\mu$g/kg. Copper contents of samples were 8,9-214.9 $\mu$g/kg and there was not a sample over the World Health Organization(WHO) criteria of 500 $\mu$g/kg. Zinc contents ranged N.D. - 342.9 $\mu$g/kg and Manganese contents ranged N.D.- 8.31 mg/kg. 2. The comparison of heavy metal contents among the bay salts from three producing districts was significantly different in Pb, Cd and Cu contents. 3. The comparison of heavy metal contents between the bay salts and remade salts was not significantly different in Pb, Cd and Cu contents. 4. The contents of Pb, Cd, Zn and Mn in fine salts were much lower than those of bay salts and remade salts.