• 제목/요약/키워드: Environmental Resistance Performance

검색결과 461건 처리시간 0.027초

육상풍력터빈 확대기초의 재사용을 위한 보강방법에 관한 실험적 연구 (An Experimental Study on Reinforcement Method for Reuse of Onshore Wind Turbine Spread Footing Foundations)

  • 송성훈;정연주;박민수;김정수
    • 대한토목학회논문집
    • /
    • 제41권1호
    • /
    • pp.1-11
    • /
    • 2021
  • 기존 육상풍력터빈의 리파워링 시 기존 기초를 재사용하기 위해서는 증가된 타워 직경 및 터빈 하중에 맞게 기존 기초를 재설계 및 보강하는 것이 중요하다. 본 연구에서는 육상풍력터빈의 기초형식 중 가장 널리 사용되고 있는 확대기초의 재사용을 위해 기존 확대기초 위에 새로운 콘크리트 기초부를 증설하는 슬래브 확장 보강방법 및 앵커부 구조디테일에 대해 검토하였다. 그리고 앵커부 구조디테일에 따른 보강된 확대기초의 하중저항성능을 실험적으로 평가하였다. 실험결과, (1) 앵커부 철근 유무에 따라 내력이 30 % 이상 증가하였다. (2) 앵커링에 부착된 Pile-sleeve는 앵커링과 콘크리트 사이의 전단슬립거동을 방지하여 회전강성 증가에 기여하였다. (3) Slab connector는 신?구 콘크리트 분리 방지 및 일체화 거동을 향상시켜 내력 및 변형능력 증가에 기여하였다.

RGB 작물 생육지수를 활용한 콩 한발 스트레스 판별기술 평가 (Detection of Drought Stress in Soybean Plants using RGB-based Vegetation Indices)

  • 상완규;김준환;백재경;권동원;반호영;조정일;서명철
    • 한국농림기상학회지
    • /
    • 제23권4호
    • /
    • pp.340-348
    • /
    • 2021
  • 본 연구는 콩의 한발 스트레스 판별에 대하여 RGB 영상에 기반한 작물 생육 지수의 적용 가능성과 한계점을 구명하기 위해 수행되었다. RGB 영상에서 추출한 생육 지수들과 한발 스트레스에 반응하는 대표적인 표현형 지표들(군락 피복도, 엽면적, 엽록소 함량 등)과의 높은 상관관계를 통해 영상 기반 생육 진단 모델개발의 가능성을 확인할 수 있었다. 다만 판별의 정확도와 해상도를 개선시키기 위해서는 향후 다양한 재배조건에서 지속적인 성능 평가가 이루어져야 할 것이다. 본 연구의 결과는 향후 RGB 영상을 활용한 콩환경 스트레스 판별에 있어서 영상 전처리, 영상 분석방법, 생육 지수 정량화 기술 개발에 도움을 줄 수 있을 것이며, 개발된 생육 인자 예측 모델은 환경 스트레스 조기 진단을 통한 영농 의사결정 지원 모델의 개발에 기여할 수 있을 것으로 판단된다.

인공 신경망 알고리즘을 활용한 플라이애시 콘크리트의 염해 내구성능 예측 (The Prediction of Durability Performance for Chloride Ingress in Fly Ash Concrete by Artificial Neural Network Algorithm)

  • 권성준;윤용식
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권5호
    • /
    • pp.127-134
    • /
    • 2022
  • 본 연구에서는 장기재령(4~6년)으로 양생된 플라이애시 콘크리트를 대상으로 촉진 염화물 이온 통과 시험을 수행하였다. 콘크리트 배합은 3수준의 물-결합재 비(0.37, 0.42, 0.47)와 2수준의 플라이애시 치환율(0, 30 %)을 가지고 있었으며, 시간 의존적으로 개선되는 통과 전하량을 정량적으로 분석하였다. 또한 실험결과를 GRU 알고리즘을 고려한 단별량 시계열 모델을 적용하여 학습하였으며, 그 예측값을 평가하였다. 통과전하량 실험 결과, 플라이애시 콘크리트는 물-결합재 비에 의한 통과 전하량의 변화가 재령이 증가함에 따라 점차 감소하였으며 OPC 콘크리트에 비하여 우수한 염해저항성을 나타내었다. 최종 평가일인 6년에서 플라이애시 콘크리트는 모든 물 결합재 비 조건에서 'Very low' 등급에 해당되는 통과 전하량이 평가되었지만, OPC 콘크리트의 경우 가장 높은 물-결합재 비를 갖는 조건에서 'Moderate' 등급을 나타내었다. 메인 알고리즘으로서 사용한 GRU 알고리즘은 시계열 데이터를 분석할 수 있고 연산 속도가 빠른 장점을 갖고 있다. 4개의 은닉층을 갖는 딥-러닝 모델이 고려되었으며 결과값은 실험값을 합리적으로 예측하고 있었다. 본 연구의 딥-러닝 모델은 단변량 시계열 특성만을 고려할 수 있는 한계점이 존재하지만 추가 연구를 통해 콘크리트의 강도 및 확산계수와 같은 다양한 특성을 고려할 수 있는 모델이 개발 중에 있다.

FRP 보강근비에 따른 FRP 보강 콘크리트 슬래브의 파괴거동 분석 (Analysis of Failure Behavior of FRP Rebar Reinforced Concrete Slab based on FRP Reinforced Ratio)

  • 장낙섭;김영환;오홍섭
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제25권5호
    • /
    • pp.173-181
    • /
    • 2021
  • 철근콘크리트 구조물은 다양한 환경에 노출되어 수분 침투로 인한 철근 부식이 발생하며, 부식으로 인한 구조물의 내구성능 저하 문제가 발생할 수 있다. 따라서 이러한 문제점을 해결하기 위해 철근에 비해 인장강도, 비부식성, 경량화 등 뛰어난 장점을 가진 FRP 보강근에 대한 연구가 활발히 진행되고 있다. FRP 보강근은 철근과 달리 항복 구간이 없으므로 파괴 시까지 선형탄성거동이 나타나고 탄성계수가 낮아 과도한 처짐이 발생할 수 있으므로 한계상태 조건에 대한 적용성 검토가 필요하다. 한계상태에서 FRP 보강 콘크리트 의 휨 설계 시 ACI 440.1R은 FRP 보강근의 재료적 불확실성을 고려하여 환경감소계수와 강도감소계수를 모두 적용하여 휨강도가 크게 낮아진다. 따라서 본 연구에서는 국내·외 다양한 문헌을 조사하여 유효단면이차모멘트 제안식의 처짐 해석 결과와 실험결과를 비교하였으며, ACI 440.1R 및 Fib bulletin 40의 설계휨강도를 분석하였다. 실험 결과에 따른 휨강도는 ACI 440.1R에 비해 Fib bulletin 40의 설계휨강도와 유사한 경향이 확인되었으며, 인장지배단면에서 ACI 440.1R은 설계휨강도를 보수적으로 평가하는 것으로 나타났다.

저온 상변화 물질 함침 경량골재를 이용한 나노 개질 융설 콘크리트 개발 (Development of Nanomodified Snow-Melting Concrete Using Low-Temperature Phase-Change Material Impregnated Lightweight Aggregate)

  • 경주현;김선미;허종완
    • 대한토목학회논문집
    • /
    • 제42권6호
    • /
    • pp.787-792
    • /
    • 2022
  • 겨울철 제설염의 사용은 콘크리트의 미세조직을 손상시기게 되고 이는 내구성을 감소시켜 콘크리트의 수명 단축으로 이어진다. 이러한 단점을 개선하기 위해 상변화물질(Phase Change Material, PCM)의 잠열을 콘크리트에 적용함으로써 손상을 완화하고 제설염의 수요를 감소시킬 수 있는 융설 PCM 함침 경량골재(Phase Change Material Impregnated Light Weight Aggregate, PCM-LWA) 콘크리트를 개발하고자 한다. 콘크리트를 제작할 때, PCM을 함침하고 캡슐화한 팽창점토(Expanded Clay)는 일반골재의 50 %를 대체하여 사용되었으며, 열적 성능을 향상시키기 위해 사용된 다중벽 탄소나노튜브(Multi-walled Carbon Nano Tube, MWCNT)는 바인더 중량 대비 0.10 %, 0.15 % 및 0.20 %의 비율로 첨가되었다. PCM-LWA를 적용한 시편들의 압축강도 시험 결과 약 54 %의 강도 감소를 보였지만 MWCNT의 첨가를 통하여 PCM-LWA 콘크리트의 열적 성능을 크게 향상시켰다. 열 사이클링 시험에서 모든 시편은 15℃ ~ -5℃의 온도에서 시험하였다. 주변 온도가 0℃ 미만으로 내려갈 때, 다른 시편들의 내부 온도는 0℃ 미만으로 내려가거나 조금 웃도는 경향을 보였지만, CNT를 0.10 % 첨가한 시편의 내부 온도는 2℃로 유의미한 차이를 보였다. 0.15CNT와 0.20CNT의 경우 CNT의 함유로 인하여 과냉각이 발생하였고 열효율이 떨어지게 되어 시편 내부의 온도가 0℃ 이하로 떨어지는 것을 확인할 수 있었다. 융설 시험에서 열 사이클링 시험의 결과와 유사하게 50PCM-LWA와 0.10CNT는 얼음을 녹이는 데에 가장 뛰어난 성능을 보였지만 시간이 흐름에 따라 열전도율이 높은 0.10CNT 시편이 가장 우수한 성능을 보였다.

RC 구조물 보강을 위한 고성능 폴리우레아의 개발 및 적용성 평가 (Development and Applicability Evaluation of High Performance Poly-urea for RC Construction Reinforcement)

  • 김성배;김장호;최홍식;허권
    • 대한토목학회논문집
    • /
    • 제30권2A호
    • /
    • pp.169-176
    • /
    • 2010
  • 일반적으로 폴리우레아는 부착성능, 신장률, 투수 저항성이 매우 높아서 구조물의 방수 코팅재료로 많이 사용되고 있다. 또한, 스프레이건을 이용하여 쉽고 빠르게 작업이 가능하며, 약 30초 이내에 경화가 되기 때문에 시공성도 매우 뛰어나 우수한 기능성 재료로 각광받고 있다. 그러나, 건설산업에서 폴리우레아는 대부분이 방수코팅재료로 사용되고 있으며, 구조물의 성능을 향상시키는 보강재로 사용하기 위한 연구는 전무하다. 따라서, 본 연구는 폴리우레아를 일반 구조물의 보강재로 사용하기 위한 기초적인 연구로 폴리우레아의 구성성분의 변화에 따른 영향을 파악하고자 한다. 또한, 개발된 폴리우레아의 구조 보강성능을 확인하기 위하여, RC 보와 슬래브를 제작하여 휨 성능 실험을 수행하였다. 실험 결과, 폴리우레아는 콘크리트 시험체와 일체거동을 보이며, 연성과 강성이 상승하는 것으로 나타났다. 그러나, 섬유시트와 폴리우레아로 2중 보강한 시편은 오히려 섬유시트만으로 보강한 시편보다 낮은 성능을 보이는 것으로 나타났다.

Perspective of breaking stagnation of soybean yield under monsoon climate

  • Shiraiwa, Tatsuhiko
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.8-9
    • /
    • 2017
  • Soybean yield has been low and unstable in Japan and other areas in East Asia, despite long history of cultivation. This is contrasting with consistent increase of yield in North and South America. This presentation tries to describe perspective of breaking stagnation of soybean yield in East Asia, considering the factors of the different yields between regions. Large amount of rainfall with occasional dry-spell in the summer is a nature of monsoon climate and as frequently stated excess water is the factor of low and unstable soybean yield. For example, there exists a great deal of field-to-field variation in yield of 'Tanbaguro' soybean, which is reputed for high market value and thus cultivated intensively and this results in low average yield. According to our field survey, a major portion of yield variation occurs in early growth period. Soybean production on drained paddy fields is also vulnerable to drought stress after flowering. An analysis at the above study site demonstrated a substantial field-to-field variation of canopy transpiration activity in the mid-summer, but the variation of pod-set was not as large as that of early growth. As frequently mentioned by the contest winners of good practice farming, avoidance of excess water problem in the early growth period is of greatest importance. A series of technological development took place in Japan in crop management for stable crop establishment and growth, that includes seed-bed preparation with ridge and/or chisel ploughing, adjustment of seed moisture content, seed treatment with mancozeb+metalaxyl and the water table control system, FOEAS. A unique success is seen in the tidal swamp area in South Sumatra with the Saturated Soil Culture (SSC), which is for managing acidity problem of pyrite soils. In 2016, an average yield of $2.4tha^{-1}$ was recorded for a 450 ha area with SSC (Ghulamahdi 2017, personal communication). This is a sort of raised bed culture and thus the moisture condition is kept markedly stable during growth period. For genetic control, too, many attempts are on-going for better emergence and plant growth after emergence under excess water. There seems to exist two aspects of excess water resistance, one related to phytophthora resistance and the other with better growth under excess water. The improvement for the latter is particularly challenging and genomic approach is expected to be effectively utilized. The crop model simulation would estimate/evaluate the impact of environmental and genetic factors. But comprehensive crop models for soybean are mainly for cultivations on upland fields and crop response to excess water is not fully accounted for. A soybean model for production on drained paddy fields under monsoon climate is demanded to coordinate technological development under changing climate. We recently recognized that the yield potential of recent US cultivars is greater than that of Japanese cultivars and this also may be responsible for different yield trends. Cultivar comparisons proved that higher yields are associated with greater biomass production specifically during early seed filling, in which high and well sustained activity of leaf gas exchange is related. In fact, the leaf stomatal conductance is considered to have been improved during last a couple of decades in the USA through selections for high yield in several crop species. It is suspected that priority to product quality of soybean as food crop, especially large seed size in Japan, did not allow efficient improvement of productivity. We also recently found a substantial variation of yielding performance under an environment of Indonesia among divergent cultivars from tropical and temperate regions through in a part biomass productivity. Gas exchange activity again seems to be involved. Unlike in North America where transpiration adjustment is considered necessary to avoid terminal drought, under the monsoon climate with wet summer plants with higher activity of gas exchange than current level might be advantageous. In order to explore higher or better-adjusted canopy function, the methodological development is demanded for canopy-level evaluation of transpiration activity. The stagnation of soybean yield would be broken through controlling variable water environment and breeding efforts to improve the quality-oriented cultivars for stable and high yield.

  • PDF

총체사료용 다수성 호위축병저항성 "영양보리" (A New Whole Crop Silage Barley Cultivar, "Youngyang" with High Yielding and BaYMV Resistance)

  • 현종내;권순종;김현태;고종민;임시규;김정곤;박형호;허화영;권영업;김종근
    • 한국육종학회지
    • /
    • 제40권4호
    • /
    • pp.484-489
    • /
    • 2008
  • "영양보리"는 총체생산성이 높으며 사료 영양가가 우수한 보리품종을 개발하기 위하여 키가 크고 내습성이 강한 부농을 모본으로 하고 조숙 계통인 밀양55호를 부본으로 하여 1992년도 영남농업연구소에서 인공 교배하였다. 1993년 $F_1$을 양성한 후 1994년부터 1995년까지 집단육종법으로 $F_2$, $F_3$ 세대를 전개하였고, 1996년부터 1997년까지 계통육종법으로 $F_4$, $F_5$ 계통을 전개하여 초형 및 내병성이 우수한 YB3882-B-B-B-17-1 계통을 선발하였다. 1998년부터 1999년까지 2년간 생산력검정 예비시험과 생산력 검정 본시험을 실시한 결과, 직립이며 총체수량성이 높고 내습성이 강하여 총체 사료용 보리로서 우수성이 인정되어 "밀양111호"로 계통명을 부여하고 2000년부터 2002년까지 3년간 지역적응시험을 실시하였다. 그 결과, 수량성이 높고 습해 및 호위축병에 강한 계통으로 입증되어 2002년 9월 농작물 직무육성품종선정심의회에서 신품종으로 선정됨과 동시에 "영양"으로 명명하여 등록하고 농가에 보급하게 되었다. 1. 영양보리는 올보리에 비해 출수기는 2000년부터 2002년까지 3년동안 수원, 아산, 대전에서 평균 5월 1일로 올보리보다 4일 정도 늦었으며 성숙기는 수원에서 평균 6월 6일로 올보리 보다 1일정도 늦은 중만생종이다(표2, 3). 2. 영양보리는 초장은 83 cm로 올보리 보다 2 cm크며, $m^2$ 당 경수는 637개로 올보리에 비해 120개 적었으며, 엽신/줄기+엽신의 비율과 이삭/총체 비율은 올보리와 비슷한 하였다. 3. 내습성과 도복 정도는 올보리와 비슷하였으나 연천에서 실시한 내한성은 올보리 보다 약 하였으며 호위축병 저항성은 올보리 보다 강하고, 흰가루병 저항성은 올보리와 같았다. 4. 영양보리의 건물수량은 11.7톤/ha으로 올보리보다 18% 증수하였으며, 종실수량은 6.32톤/ha로 올보리 보다 5% 증수한 다수성이다. 5. 영양보리의 탈립율이 42%로 올보리에 비해 낮았고. 조단백질 함량, ADF, NDF는 올보리와 비슷하며, TDN비율은 올보리에 비하여 다소 낮고 사일레지 품질은 비슷하였다.

참여자관점에서 공급사슬관리 시스템의 성공에 영향을 미치는 요인에 관한 실증연구 (An Empirical Study on the Determinants of Supply Chain Management Systems Success from Vendor's Perspective)

  • 강성배;문태수;정윤
    • Asia pacific journal of information systems
    • /
    • 제20권3호
    • /
    • pp.139-166
    • /
    • 2010
  • The supply chain management (SCM) systems have emerged as strong managerial tools for manufacturing firms in enhancing competitive strength. Despite of large investments in the SCM systems, many companies are not fully realizing the promised benefits from the systems. A review of literature on adoption, implementation and success factor of IOS (inter-organization systems), EDI (electronic data interchange) systems, shows that this issue has been examined from multiple theoretic perspectives. And many researchers have attempted to identify the factors which influence the success of system implementation. However, the existing studies have two drawbacks in revealing the determinants of systems implementation success. First, previous researches raise questions as to the appropriateness of research subjects selected. Most SCM systems are operating in the form of private industrial networks, where the participants of the systems consist of two distinct groups: focus companies and vendors. The focus companies are the primary actors in developing and operating the systems, while vendors are passive participants which are connected to the system in order to supply raw materials and parts to the focus companies. Under the circumstance, there are three ways in selecting the research subjects; focus companies only, vendors only, or two parties grouped together. It is hard to find researches that use the focus companies exclusively as the subjects probably due to the insufficient sample size for statistic analysis. Most researches have been conducted using the data collected from both groups. We argue that the SCM success factors cannot be correctly indentified in this case. The focus companies and the vendors are in different positions in many areas regarding the system implementation: firm size, managerial resources, bargaining power, organizational maturity, and etc. There are no obvious reasons to believe that the success factors of the two groups are identical. Grouping the two groups also raises questions on measuring the system success. The benefits from utilizing the systems may not be commonly distributed to the two groups. One group's benefits might be realized at the expenses of the other group considering the situation where vendors participating in SCM systems are under continuous pressures from the focus companies with respect to prices, quality, and delivery time. Therefore, by combining the system outcomes of both groups we cannot measure the system benefits obtained by each group correctly. Second, the measures of system success adopted in the previous researches have shortcoming in measuring the SCM success. User satisfaction, system utilization, and user attitudes toward the systems are most commonly used success measures in the existing studies. These measures have been developed as proxy variables in the studies of decision support systems (DSS) where the contribution of the systems to the organization performance is very difficult to measure. Unlike the DSS, the SCM systems have more specific goals, such as cost saving, inventory reduction, quality improvement, rapid time, and higher customer service. We maintain that more specific measures can be developed instead of proxy variables in order to measure the system benefits correctly. The purpose of this study is to find the determinants of SCM systems success in the perspective of vendor companies. In developing the research model, we have focused on selecting the success factors appropriate for the vendors through reviewing past researches and on developing more accurate success measures. The variables can be classified into following: technological, organizational, and environmental factors on the basis of TOE (Technology-Organization-Environment) framework. The model consists of three independent variables (competition intensity, top management support, and information system maturity), one mediating variable (collaboration), one moderating variable (government support), and a dependent variable (system success). The systems success measures have been developed to reflect the operational benefits of the SCM systems; improvement in planning and analysis capabilities, faster throughput, cost reduction, task integration, and improved product and customer service. The model has been validated using the survey data collected from 122 vendors participating in the SCM systems in Korea. To test for mediation, one should estimate the hierarchical regression analysis on the collaboration. And moderating effect analysis should estimate the moderated multiple regression, examines the effect of the government support. The result shows that information system maturity and top management support are the most important determinants of SCM system success. Supply chain technologies that standardize data formats and enhance information sharing may be adopted by supply chain leader organization because of the influence of focal company in the private industrial networks in order to streamline transactions and improve inter-organization communication. Specially, the need to develop and sustain an information system maturity will provide the focus and purpose to successfully overcome information system obstacles and resistance to innovation diffusion within the supply chain network organization. The support of top management will help focus efforts toward the realization of inter-organizational benefits and lend credibility to functional managers responsible for its implementation. The active involvement, vision, and direction of high level executives provide the impetus needed to sustain the implementation of SCM. The quality of collaboration relationships also is positively related to outcome variable. Collaboration variable is found to have a mediation effect between on influencing factors and implementation success. Higher levels of inter-organizational collaboration behaviors such as shared planning and flexibility in coordinating activities were found to be strongly linked to the vendors trust in the supply chain network. Government support moderates the effect of the IS maturity, competitive intensity, top management support on collaboration and implementation success of SCM. In general, the vendor companies face substantially greater risks in SCM implementation than the larger companies do because of severe constraints on financial and human resources and limited education on SCM systems. Besides resources, Vendors generally lack computer experience and do not have sufficient internal SCM expertise. For these reasons, government supports may establish requirements for firms doing business with the government or provide incentives to adopt, implementation SCM or practices. Government support provides significant improvements in implementation success of SCM when IS maturity, competitive intensity, top management support and collaboration are low. The environmental characteristic of competition intensity has no direct effect on vendor perspective of SCM system success. But, vendors facing above average competition intensity will have a greater need for changing technology. This suggests that companies trying to implement SCM systems should set up compatible supply chain networks and a high-quality collaboration relationship for implementation and performance.

폭발하중을 받는 콘크리트 구조물의 실험적 거동분석 : (I) 실험수행절차 (Behavior Analysis of Concrete Structure under Blast Loading : (I) Experiment Procedures)

  • 이나현;김성배;김장호;최종권
    • 대한토목학회논문집
    • /
    • 제29권5A호
    • /
    • pp.557-564
    • /
    • 2009
  • 최근, 테러 및 전쟁과 관련된 폭발사고가 빈번히 발생하고 있으며, 특히 도심지에서는 이러한 폭발사고로 인해 인명피해 뿐 아니라 주요 시설물에도 큰 손상이 가해져 제2차, 3차의 피해가 발생하게 된다. 폭발사고에 대하여 인명 및 시설물을 안전하게 보호하기 위해서는 기본적으로 구조물에 가해지는 폭발하중 효과에 대한 이해가 필요하다. 폭발하중은 매우 빠른 시간 내에 콘크리트 구조물에 큰 압력으로 작용하는 하중이므로 변형률 속도와 구조물의 국부적인 손상을 고려하여 동적응답을 평가해야 한다. 일반적으로, 콘크리트는 다른 건설재료에 비해 상대적으로 높은 폭발저항성을 가진 재료로 알려져 있다. 그러나 폭발실험이라는 특수한 실험조건으로 인하여 국내외적으로 실험에 관련된 정보 및 결과 공유가 상당히 제한적으로 이뤄지고 있는 실정이다. 그러므로 본 논문에서는 폭발에 의한 압력하중이 철근콘크리트 구조물에 미치는 영향과 방호성능을 평가하기 위하여 국방과학시험연구소 다락대 시험장에서 $1.0m{\times}1.0m{\times}150mm$의 철근콘크리트 슬래브 구조물을 제작하여 시편으로부터 높이 1.5 m에서 TNT 9 lbs와 TNT 35 lbs으로 예비시험을 수행하였으며, 동일한 이격거리(standoff)에서 ANFO 35 lbs으로 본 실험을 수행하였다. 이는 국내 최초 민간에서 수행되어진 실험으로써, 첫 번째 논문에서는 폭발실험을 하기 위한 기본적인 실험 구성 및 구조물의 거동을 측정하기 위한 계측장비 구성에 대하여 검토하여 계측 시스템의 구축 및 폭파시험 수행절차를 구축하고자 한다. 센서, 시그널 컨디셔너, DAQ시스템, 소프트웨어로 구축된 계측 시스템을 바탕으로 정립된 폭파시험 수행절차는 향후 국내의 방호설계 및 폭발하중을 받는 구조물의 효과적인 거동계측 등 관련 연구분야의 기초자료가 될 것이라고 판단되는 바이다.